B&B Electronics UH401SL-2KV Datasheet

Single Port USB Isolators
PRODUCT FEATURES
• UL60601-1Recognized(UH401&UH401SL)
• 15kVESDProtection
• -40to80°COperatingTemperature
• HighRetentionUSBConnectors
• Ultra-Compact
• USBBusPowered
• USBCableIncluded
These little isolators pack a powerful punch against electrical noise, surges and spikes – up to 4kV isolation. Protect expensive PCs and equipment from damaging electrical storms, power surges and other high EMI/RFI disturbances. This isolation barrier eliminates ground loops which are disruptive in measurement applications. Model UH401 and UH401SL provide 4 kV Isolation and are UL 60601-1 Recognized, which makes them appropriate for use with medical equipment. UH401-2KV and UH401SL-2KV provide 2 kV Isolation.
All models are USB bus powered and provide up to 100mA of current to attached downstream devices when they are attached to a full power (500 mA) USB host port.
IN THE FIELD
Protecting Laptops on Field Service Calls
Industry: Industrial Automation Product: USB Isolators
www.bb-elec.com/ USBField
UH401, UH401-2KV
Carrier data charges may apply.
They comply with the USB 1.1 standard and transfer data at either 12 Mbps or 1.5 Mbps. These data rates are preconfigured at the factory. You should select a model that is appropriate for your USB peripheral (low speed or full speed).
Four models are available to choose from. Select a low speed version, UH401SL or UH401SL-2KV if you are using a low speed device. Low Speed devices are typically human interface devices such as a mouse or keyboard. Use the full speed version, UH401 or UH401-2KV for full speed USB device.
ORDERING INFORMATION
Model nuMBer uSB SPeed iSolation
UH401 Full (12 Mbps) 4 kV UH401SL Low (1.5 Mbps) 4 kV UH401-2KV Full (12 Mbps) 2 kV UH401SL-2KV Low (1.5 Mbps) 2 kV
www.bb-elec.com
IN THE FIELD
USB Isolation in Medical Applications
Industry: Industrial Automation Product: USB Isolators
www.bb-elec.com/ USBMedical
UH401, UH401-2KV
Carrier data charges may apply.
|
UH401 Series_3713ds
Single Port USB Isolators
SPECIFICATIONS
teChnology
Standards
interFaCe
USB Ports
LED Indicators Power from USB bus
Power
Input Voltage Standard USB bus power (5VDC) Downstream Power
Provided Isolation UH401-2KV Isolation UH401SL-2KV Isolation UH401 Isolation UH401SL
USB 1.1, 12 Mbps (UH401 & UH401-2KV) or 1.5 Mbps (UH401SL & UH401SL-2KV) Note: These devices are transparent to the operating system, require no software drivers and will not be enumerated in device manager.
High Retention USB Type B (Upstream) , Type A (Downstream), Minimum withdrawal force of 15 Newtons (~3.4 lbs-force)
Up to 100mA with full power upstream connection
2KV 2KV, 4KV 4KV
enVironMental
Operating Temperature
MTBF 1,049,851 hours
MTBF Calculation
MeChaniCal
Enclosure IP30 plastic case Dimensions 4.32 x 5.08 x 2.03 cm (1.7 x 2.0 x 0.8 in)
aPProValS/CertiFiCationS
Emissions FCC Class A, CISPR Class A (EN55022)
CE
EN61000-6-2:2005 (Heavy Industry) EN61000-4-2:2008 (ESD +/-8kV Contact, +/-15kV Air EN61000-4-3:2006 (RI) 10V/m, 80-1000MHz; 3V/m, 1.3 to 2.7 GHz EN61000-4-4:2004 (EFT Burst) +/-2kV DC ports; +/-1kV signal ports EN61000-4-5:2005 (Surge) +/-500V DC ports; +/-1kV signal ports EN61000-4-6:2005 (CI) 10Vrms, 0.15 to 80 MHz EN61000-4-8:2001 (Magnetic) 10A/m, 50Hz & 60Hz
-40 to 80° C (-40 to 176° F)
MIL 217F Parts count reliability prediction
MECHANICAL DIAGRAM
4.32 cm
1.70 in
5.08 cm
2.0 in
2.03 cm
0.80 in
orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Loading...