B&B Electronics UE204 Quick Start Guide

Document Number – UE204-1012qsg

11.. CChheecckk ffoorr RReeqquuiirreedd HHaarrddwwaarree

 UE204 USB Over Ethernet Server  This Quick Start Guide  CD ROM with Configuration Software and User

Manual

 Power Adapter w/ International Blades

55.. CCoonnnneecctt ttoo tthhee UUSSBB DDeevviiccee

1. When the USB Server is located, the connected USB devices will be listed on the tree under the server. Double click on the device to connect to it.

2. You will now be able to use the device the same as if it

was connected to your PC.

44.. CCoonnnneecctt aanndd CCoonnffiigguurree tthhee UUSSBB SSeerrvveerr

1. Connect the USB Server to your network and plug in the power.

2. Launch the application software using the desktop icon

3. The main dialog box will open and the software will search the network for connected USB server. The default IP setting is DHCP Enabled. If a DHCP server is not available, it will use IP address

169.254.10.10

33.. IInnssttaallll tthhee ssooffttwwaarree oonn yyoouurr PPCC

4. Insert the CD into your CD ROM Drive. The installation program should start automatically. If not, navigate to the installation executable file and double click on it. Follow the instructions provided by the installation wizard.

Quick Start Guide

UE204

USB Over Ethernet Server

22.. CCoonnttrroollss && IInnddiiccaattoorrss

DC Power Jack

Barrel Connector, 5.5 mm, Center Positive

Network Connection

RJ-45, 10/100/1000 Ethernet

Power LEDs

Green – ON when Power is Applied

USB Port LED’s

Green – ON when USB Port is connected

USB Ports

Type A, USB 2.0

Put