IASW5P-0605qsg - 1/2
© 2004 by B&B Electronics. All rights reserved.
Quick Start Guide
5-Port Industrial 10/100
Ethernet Switch CE
Model IASW5P
Description
The IASW5P is an Industrial Ethernet switch. Switches have some advantages over hubs. For one, they remember
which node is which and route the traffic accordingly. Also full-duplex or two-way communications can be realized with
switches, making them more efficient than hubs.
This is no standard switch either, since the product is made for the unpredictable, industrial environment. It is housed in
a sturdy, compact ABS enclosure with options to be either panel or DIN rail mounted.
Connections are straight forward. Each port is designed to auto negotiate for speed and connectivity. No crossover
cables necessary. It will accept standard RJ45 UTP or STP cabling. Power supply is any unregulated 9-30 VDC source.
Diagnostic LEDs help troubleshooting and serve as a quick visual monitor. There is one red LED to indicate power.
Each port has two LED’s, an orange for speed and a green for link/activity.
Connections
Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your
devices to the unit since the switch supports auto crossover. External power supply is connected using the 2-position
pluggable terminal block. Power supply model 232PS4, 485PS4 or PS5R-A12 is required, not included.
RJ45 Pinouts
Pin Signal
1 TX+
2 TX3 RX+
4 not used
LED Color On Off Blinking
SPD orange 100 10 reset/error
LNK green link no link data
PWR red power no power NA
LED Indicators Summary
5 not used
6 RX7 not used
8 not used
Mechanical & Power Options
DIN OR PANEL
MOUNTABLE
3.5 in
8.9 cm
PWR
LNK
Port 1
SPD
Port 2
4.5 in
11.4 cm
Port 3
Port 4
Port 5/Uplink
1.3 in
3.2 cm
PLUGGABLE
TERMINAL
BLOCK
12VDC@300MA
12VDC@300MA
232PS4
485PS4
or
PS5R-A12
REQUIRED
(NOT INCLUDED)
LED Indicators
SPD
LNK
PWR
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
PRODUCT INFORMATION B&B ELECTRONICS
+353 91 792444 Fax +353 91 792445
www.bb-europe.com orders@bb-elec.com support@bb-europe.com
IASW5P-0605qsg - 2/2
© 2004 by B&B Electronics. All rights reserved.
Specification Summary
Switch Type: IEEE 802.3 & 802.3u
Unmanaged Layer 2
Main Features: Store-and-forward scheme
Broadcast storm protection
Automatic address learning, aging, and migration
Full-duplex support
Half -duplex back pressure flow control
Aggressive back off in half-duplex mode
to enhance performance
Speed: Autodetecting 10/100 Mbps
LED: Per port speed indicator
Per port activity indicator
Per unit power indicator
Frame Buffer: 64KB share by all ports
MAC Buffer: 1K (automatic learning, aging, and migration)
Isolation: 1500 VDC isolation magnetics
Bandwidth: 1.4Gbps high performance memory bandwidth
Connections: 5 RJ45 female jacks (auto MDI/MDIX crossover)
2-position pluggable terminal block
Power: 9 – 30 VDC @ 3 W maximum
Approval: FCC Class A, CE
Temperature: 0 to 70°C
Dimensions: 4.5 x 3.5 x 1.3 in (11.4 x 8.9 x 3.2 cm)
Warranty
All B&B Electronics products have a one-year warranty. Products that are damaged or modified are not covered.
Returns
If, for any reason, you wish to return one of our hardware products, you may return it via UPS or insured parcel post,
undamaged, with the receipt, within 30 days of purchase, for a full refund (less shipping charges). Software is not
returnable if opened. Large orders or custom orders may not be returnable or may be subject to a restocking charge.
Call, FAX, or e-mail to request a Return Material Authorization (RMA) number and routing instructions. Packages
returned without prior authorization will be refused. All products returned to B&B Electronics after 30 days may be
charged a 20% restocking fee. Any customs charges including, duties, taxes and brokerage fees are the sole
responsibility of the recipient.
Return and Repair Contact Information
Phone: (815) 433-5100 (8 – 4:30 CST)
Email: orders@bb-elec.com
Fax: (815) 433-5109
Approvals
Federal Communications Commission
Radio Frequency Interface Statement
Class A Equipment
Manufacturer’s Name: B&B Electronics Manufacturing Company
Manufacturer’s Address: P.O. Box 1040
707 Dayton Road
Model Number: IASW5P
Description: 5 Port Industrial 10/100 Ethernet Switch
Type: Light industrial ITE equipment
Application of Council Directive: 89/336/EEC
Standards: EN 55022
EN 61000-6-1
EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11)
Robert M. Paratore, Director of Engine ering
DECLARATION OF CONFORMITY
Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com
PRODUCT INFORMATION B&B ELECTRONICS
+353 91 792444 Fax +353 91 792445
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
www.bb-europe.com orders@bb-elec.com support@bb-europe.com