How it Works
B&B Electronics
Loading...
ESWG626-2SFP-T
Datasheet
3 pgs405.36 Kb0
User Manual
16 pgs857.79 Kb0

B&B Electronics ESWG626-2SFP-T User Manual

Download
Installation Guide
Elinx ESW626 Family
26 Port 19 inch
Unmanaged Rackmount Ethernet Switch
ESW626 Series
Documentation Number: ESW626series-0913m
International Headquarters:
707 Dayton Road
Ottawa, IL 61350 USA
Phone (815) 433-5100
Website: www.bb-elec.com
Sales e-mail: orders@bb-elec.com
Technical Support: support@bb.elec.com
European Headquarters
B&B Electronics
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone +353 91-792444
Website: www.bb-europe.com
Sales e-mail: sales@bb-europe.com
Technical Support: support@bb-europe.com
Original – March 2011
©2011 No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photography, recording, or any information storage and retrieval system without written consent. Information in this manual is subject to change without notice, and does not represent a commitment on the part. B&B Electronics Manufacturing shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use of this manual. All brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder.
Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Table of Contents
OVERVIEW .................................................................... 1
PACKAGE CHECKLIST ................................................ 2
ESW626 FAMILY ........................................................... 2
Features ....................................................................................................... 2
Front Panel ................................................................................................. 2
Back Panel ................................................................................................... 3
LED Description ......................................................................................... 3
Mounting Options ...................................................................................... 4
Dimensional Drawing ................................................................................. 4
PORTS ........................................................................... 5
RJ45 ............................................................................................................. 5
Gigabit Copper/SFP (mini-GBIC) COMBO ports .................................. 5
SFP Installation and Connection .............................................................. 7
Cabling ........................................................................................................ 9
100Base FX SC Fiber ................................................................................. 9
Fiber connection illustration ................................................................... 10
POWER INPUT CONNECTIONS ................................. 10
SPECIFICATIONS ....................................................... 10
Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Overview
B&B Electronics Elinx family of Industrial rack mount Ethernet switches have been designed to meet light heavy Industrial communication requirements.
The ESW626 Unmanaged family offers a variety of Industrial models. The switch configurations range from 26 ports RJ45 copper to RJ45 copper with multi mode, single mode, and or SFP gigabit ports.
They will support IEEE 802.3 (10Base-T), IEEE 802.3u (100BaseTX) and (100BaseFX), 802.3ab 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, 802.3x for flow control, full and half duplex, MDI/MDIX auto-sensing.
The ESW626 series accepts 18VDC to 36VDC input voltage using terminal blocks. The operating temperature range for standard models are -10˚C to 60˚C with wide temperature models supporting -40˚C to 75˚C. The ambient relative humidity rating is 5 to 95% (Non-condensing).
Installation Guide Documentation Number: ESW626series-0913m 1
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Package Checklist
The ESW626 will ship with the following items.
ESW626 series unit Installation guide
ESW626 Family
Features
10Base-T, 100BaseTX, 100BaseFX,1000BaseSX/LX/LHX/ZX，
1000Base(X)
10/100Mbps, full and half duplex, MDI/MDIX auto -sensing 2 copper/SFP combo ports for Gigabit Ethernet RJ45 shielded connectors IP30 metal enclosure Rack mount Shock, vibration, and freefall 8k MAC address -10˚C to 60˚C or -40˚C to 75˚C（Wide Temperature Models）
Front Panel
1. Power LED
2. RJ45 LED
3. Fiber, Combo RJ45 / SFP LED
4. Speed
5. Link
6. System Ready
2 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Back Panel
LED
Status
Description
PWR
Green
Power Applied
Off
No power
STA
Green
System Ready
Off
System down
10/100 Copper Upper LED
Green
100Mbps
Off
10Mbps
10/100 Copper Lower LED
Green
Link
Blinking
Activity
Off
Not connected to network
Fiber LED
Green
Link
Blinking
Activity
Off
Not connected to network
10/100/1000 Copper Upper LED
Green
1000Mbps
Off
10/100Mbps
10/100/1000 Copper Lower LED
Green
Link
Blinking
Activity
Off
Not connected to network
SFP LED
Green
1000Mbps
Blinking
Activity
Off
Not connected to network
7. On / OFF Switch
8. Power Input
9. RJ45 Port
10. Fiber, Combo SFP or RJ45 Port
LED Description
Installation Guide Documentation Number: ESW626series-0913m 3
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Mounting Options
Dimensional Drawing
4 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Ports
RJ45
The RJ45 copper ports support auto-MDI/MDIX operation. This feature allows network connections to computers, servers, or other switches using straight-through or crossover cables (See Figure below). Straight-through cable connections: pins 1, 2, 3 and 6, at one end of the cable, are connected straight-through to pins 1, 2, 3 and 6 at the other end of the cable. The table below shows the 10BASE-T/100BASE-TX MDI and MDI-X port pin outs.
Gigabit Copper/SFP (mini-GBIC) COMBO ports
The ESW626 can be ordered with up to two auto-detect Gigabit copper/SFP combo ports. The Gigabit Copper (10/100/1000Mbps) ports use Category 5e or above UTP/STP cable for connection. The SFP slots can be used to connect the network segment with single or multi-mode fiber. For installation, the module needs to be adjusted so as to be aligned correctly and then moved into the SFP slot until a click is heard. With the SFP module (fiber optic connection), the switch will be able to transmit
Installation Guide Documentation Number: ESW626series-0913m 5
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
speeds up to 1000 Mbps. Fiber optic communications will prevent harsh environment interfaces from being introduced into the network and will extend transmission distance.
6 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
SFP Installation and Connection
The SFP module is terminated with LC connectors. For installation, the module needs to be adjusted so as to be aligned correctly and then moved into the SFP slot until a click is heard.
Installation Guide Documentation Number: ESW626series-0913m 7
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
SFP Module Inserted
LC Fiber Cable Connection
8 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
To remove SFP modules lower removal bar and firmly pull transceiver out.
Cabling
Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable.
10Mbps: Category 3, 4, 5 or great cable 100Mbps: Category 5 or great cable 1000Mbps: Category 5e or great cable
Maximum cable length: 100 meters (328ft.)
100Base FX SC Fiber
The use of fiber optics has become prevalent in Industrial Ethernet network communication systems. Extending distance, high data rate capabilities, noise rejection and electrical isolation are just a few of the important characteristics that make fiber optic technology ideal for use in industrial applications.
Each fiber port has a TX (transmit) and RX (receive) connection fixed at 100Mbps speed. The fiber ports will support multi mode or single mode fiber dependent on the model number ordered.
Installation Guide Documentation Number: ESW626series-0913m 9
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Fiber connection illustration
Power Requirements
Voltage Range
18V-36VDC 25W MAX
Connection
Terminal Block
Protection
Reverse Polarity Protection
RJ45 Ports
Shielded
10/ 100BaseT(X) auto-sensing
Full/Half Duplex
MDI /MDIX auto-Negotiate
Multi Mode Fiber
100Base-FX
Distance
2 km
Power Input Connections
The ESW626 series accepts 18V-36VDC input voltage using terminal blocks.
Specifications
10 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Installation Guide Documentation Number: ESW626series-0913m 11
Wavelength
1310 nm
Cable
62.5/125 um
TX power
-23.5 to -14dbm
RX Sensitivity
<-35dbm
Connector Type
SC
Single Mode Fiber
100Base-FX
Distance
20 km
Wavelength
1310 nm
Cable
9/125 um
TX power
-15 to -8dbm
RX Sensitivity
<-35dbm
Connector Type
SC
SFP Ports
Type
Mini-GBIC SFP Ports
Connector Type
LC
Metal Enclosure
Material
Aluminum and Steel
Rating
IP30
Rack Mount
Enclosure Dimensions(W×H×D)
443×44×220 mm
IEEE Standards
IEEE802.3
10Base-T
IEEE802.3u
100BaseT(X), 100Base FX
IEEE802.3ab
1000Base(X)
IEEE802.3z
1000BaseSX/LX/LHX/ZX
IEEE802.3x
Flow control
Packet buffer
256k bytes
MAC Address Size:
8 k
Processing Type
Store and Forward
Agency Approvals
EMI
FCC Part 15, CISPR (EN55022)
Generic Standard for Light Industrial Environments
Per EN61000-6-1 EMC
EN61000-4-2 (ESD), level 2
Contact +/- 4kv
Enclosure Air +/- 8kv
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
EMC
EN61000-4-3 (RS), level 2
3V/meter
EMC
EN61000-4-4 (EFT), level 2
Signal ports
+/- 0.5kV
D.C. Power ports
+/- 1kV
A.C. Power ports
NA
Earth ground ports3
NA
EMC
EN61000-4-5 (Surge),level 2
Signal ports
+/- 1kV
D.C. Power ports
+/- 0.5kV
A.C. Power ports
NA
EMC
EN61000-4-6 (CS), level 2
Signal ports
3 V rms
D.C. Power ports
3 V rms
A.C. Power ports
NA Earth ground ports3
NA
Certifications
Enclosure
IP30
Certification
RoHS
Op. Temperature
-10˚C to 60˚C or -40˚C to 75 ˚C （Wide Temperature Type）
Storage Temperature
-40˚C to 85˚C
Ambient Relative Humidity
5 to 95%（Non-condensing）
MTBF
200,000h
12 Installation Guide Documentation Number: ESW626series-0913m
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use