B&B Electronics ESU2-400 Datasheet

High Speed USB Serial Adapters
KEY FEATURES
1, 2, 4 or 8 independent serial ports
RS-232 or software-selectable RS-232/422/485
Compatible with USB 1.1
Plug-and-play capability
Devices enumerate themselves as standard COM ports
Speeds up to 921.6 kbps
High speed UARTs with 1KB FIFOs to boost data rates
Optional surge suppression package (standard on Embedded products)
Full modem control and hardware and software flow control
Bus powered: no external power required
Embedded (board-only) units also available
Windows 2000/XP, Linux support coming soon
RoHS compliant
5 year warranty
Rev 1.0,
08.22.06
Standard serial ports via USB 2.0 without replacing peripheral hardware or application software
Connect serial peripherals with USB
2.0 Serial Adapters
You can now broaden the range of external peripherals used on your computer at higher speed rates than the USB 1.1 series, with the introduction of the High Speed USB 2.0 Serial Adapters. The USB 2.0 has more bandwidth that allows higher data rates on the serial ports for more efficiency.
The new High Speed USB Serial Adapter line gives your laptop or workstation the ability to communicate between a USB port and up to eight RS­232, RS-422, or RS-485 serial peripherals. It adds the COM port(s) via its USB connection and is compatible with new and legacy RS-232 or RS­232/422/485 devices. The USB Serial Adapters are the ideal solution for a variety of industries and applications including banking, retail and industrial automation where PCs have a significantly shorter lifecycle than the peripherals that use them.
As we continue in the race tobecomethe industryleader,ourhighperformancedevice connectivitylineexpands with the new high
speed USB2.0 Serial Adapters. The next
generation USB Serial Adapter hits speeds of up to 921.6 kbps, 1024-byte FIFO and hardware and software flow control.
2XU USB Serial Adapters
enumerate themselves as standard COM ports that are compatible with all standard RS-232 or RS-232/422/485 devices and software created for them. With the industrial surge suppression “IND” option, you can safeguard the USB Serial Adapter. The “IND” option is ideal for implementing USB-to-serial networks in factories, power plants and other potentially harsh industrial environments. USB 2.0 is fully compatible with USB 1.1 devices. The older devices work with the new bus, and vice versa.
The 400 Series models introduce the software-selectable RS-232/422/485 (Multi-Electrical Interface or MEI). The MEI capability is available on all ports at the click of a mouse. LEDs visually tell you which ports are using which protocol, so go ahead, mix and match.
Embedded USB Serial Adapters for custom enclosures
If you’re looking to seamlessly connect multiple serial peripherals via a single USB port in a custom enclosure, try
RXU board-level solutions,
Embedded USB
Serial Adapters.
HIGH SPEED USB SERIAL ADAPTER SPECIFICATIONS (VERSION 2.0)
Rev. A 6/2006
Ordering Information
Bus Interface
USB 2.0 High Speed
OS Support
Windows 2000/XP, Linux support coming soon
Data Rate
Up to 921.6 kbps (max)
Serial Ports Provided SSU: 1 DSU: 2 QSU: 4 ESU: 8
(For 400 models, each configurable as RS-232, RS-422 or RS-485 for full or half duplex communication)
USB Ports Required SSU: 1 DSU: 1 QSU: 1 ESU: 1
UARTS
1024-byte FIFOs for transmit and receive
Transceiver (RS-232/422/485)
MAX491 or compatible
Differential Driver Output (50Ù Load):
+2V (min), +3.3V (max)
Differential Driver Output (27Ù Load):
+1.5V (min), +3.3V (max)
High Input: +2V (min) Low Input: +0.8V (max) Driver Rise/Fall Time: 5ns (min), 20ns (typ),
25ns (max) Driver Input to Output Delay: 20ns (min), 40ns (typ), 60ns (max) Receiver Input to Output Delay: 40ns (min), 70ns (typ), 100ns (max)
RS-232 Output Voltage Swing: ±5V (min), ±5.4V (typ)
RS-232 Input Voltage Range: -15V (min), +15V (max) Input Threshold Low: 0.6V (min), 1.0 (typ) Input Threshold High: 2.4VV (max), 1.5 (typ)
IND Option: Surge suppression applied to each
line that is capable of sustaining up to 40A peak, 8 x 20ìs transient surges, a clamping voltage of 30V and a peak energy dissipation of
0.1 Joules.
(NOTE: The “IND” option limits data rate to
115.2 kbps)
Environment Operating: 0° to 70°C Storage: -50° to 80° C Humidity: 10% to 90%
Power Requirements
Bus-powered device, no external power supply required
Suspend power: < 500 ì A Unconfigured power: < 100 mA Configured power: < 500 mA
Size
SSU: 3.6” L x 1.7” W x 1” H DSU/QSU: 9.18” L x 5.25” W x 1.675” H ESU: 9.18” L x 5.25” W x 2.363” H
Connectors
DB-9 male
Certifications
CE, FCC Class B, RoHS & WEEE Compliant
Model Ports Interface
SSU2-100 1 RS-232 with cable
DSU2-100 2 RS-232 with cable
DSU2-400 2 RS-232/422/485 with cable
QSU2-100 4 RS-232 with cable
QSU2-400 4 RS-232/422/485 with cable
ESU2-100 8 RS-232 with cable
ESU2-400 8 RS-232/422/485 with cable
Retail Application
Banking Application
High Speed Modem
Central Bank Server at
Remote Location
Multiport USB to
RS-232 Serial Adapter
Branch Host PC
RS-232
RS-232
Teller Station 1
Teller Station 2
Loading...