B&B Electronics ERT312 Datasheet

Spectre RT Industrial Routers
ERT31x Series
PRODUCT FEATURES
• VPNsecurity
• Firewallsupport
• NAT/PATaddress&porttranslation
• SNMPmanagement
• Widetemperaturerange-40to75°C
• ComplieswithNEMATS1&TS2
The Spectre RT industrial router connects Ethernet equipment in tough environments where office-grade equipment can’t handle the job. With Ethernet, USB, I/O and auxiliary ports it’s a flexible device with the built-in ability to handle multiple data communications protocols and to fit into virtually any network topology.
The Spectre RT supports the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software. A password-protected Web interface allows users to configure and manage the Spectre RT from remote locations. The router can automatically upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network.
Users may insert Linux scripts and they can create up to four different configurations for the same router. Examples would include binary input configurations. Users may switch from one configuration to another at any time.
ORDERING INFORMATION
Model nuMBer descriPtion
ERT310 1 WAN, 1 LAN ERT312 1 WAN, 1 LAN (RS-232)
ACCESSORIES
MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power
MDR-40-24 - DIN rail mount power supply 24VDC, 1.7 A output power
www.bb-elec.com
|
ERT31x Series_3713ds
Spectre RT Industrial Routers
9.5 cm
3.74 in
SPECIFICATIONS
interFaces
Standard Ethernet 10/100 Mb USB USB Type A Host Binary I/O 1 input/1 output Port Options
Port 1
Port 2 RS-232, RS-422/485, Modbus, CNT (I/O)
I/O CNT
internal
32b ARM microprocessor 512 Mb DDR SDRAM 128 Mb Flash 1 Mb MRAM
Power
Source 10 – 30 VDC Consumption Max. 200 mA (12 VDC)
Mechanical
Dimensions 11.4 x 9.5 x 4.2 cm (4.49 x 3.74 x 1.65 in) Enclosure Metal Weight 150 g
enVironMental
Operating Temperature -40 to 75°C Storage Temperature -40 to 85°C
MECHANICAL DIAGRAM
Ethernet 10/100, RS-232, RS-422/485, Modbus, CNT (I/O)
4 Binary inputs, 1 Binary output (2 inputs maybe configured as counters) 2 Analog inputs, I Binary output
Features
DHCP – automatic IP addressing in LAN network NAT – IP address and ports translation between inside/outside
network Firewall: filtering of addresses, ports, protocols
VRRP – virtual backup router function
Networking
DynDNS client – access to the router with a dynamic IP address VLAN 802.11Q: virtual LAN QoS: quality of service Dial-in – Communicate via CSD call NTP client, NTP Server: time synchronization PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN Tunneling
IPsec, OpenVPN, L2TP – secure encrypted tunnels GRE tunnel – simple tunnel without security measures HTTP server – configuration via web server
Configuration and Diagnostics
Telnet – configuration and access to the file system SNMP – router diagnostics, communication with I/O and M-BUS
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
Additional Functions
Linux based: program your own applications AT commands on RS232, Ethernet and I/O M-RAM memory inside – router statistic saved into memory
aPProVals / certiFications
CE, FCC, NEMA TS2 EN 301 511, v9.0.2 EN 301 908-1&2, v3.2.1 ETSI EN 301 489-1 V1.8.1 EN 60950-1:06 ed.2 + A11:09 + A1:10 IEC60068-2-27, Shock 50G peak, 11ms, 3 axes IEC60068-2-6, Vibration 10-500Hz, 4G, 3 axes
ERT31x Series
9.5 cm
3.74 in
orders@bb-elec.com support@bb-elec.com
4.2 cm
1.65 in
11.4 cm
4.49 in
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Loading...