B&B Electronics ENSAM315 Datasheet

–

Harsh Duty Ethernet Connectors and Cabling

Overview

By combining standard RJ-45 connection technology with the industrially-proven mini form factor, these Industrial Ethernet Connectivity products provide a line-up designed to safeguard the integrity of your data even in the harshest manufacturing, processing or commercial settings.

Features

• Environmental Sealing

• Vibration Resistance

• Secure Robust Connections

• Performance in Electrically Noisy Conditions

PRODUCT INFORMATION

Receptacles

The following receptacles offer solutions for Ethernet field device connectivity, regardless of the operating environment. All receptacles are compatible with commercial RJ-45 connectors, enabling one solution for both harsh and benign environments.

ENxxHarshDutyCables-0903-1/3

110 Punchdown Block

Simple termination via Insulation Displacement Connections (IDC) with the use of commonly available punchdown tools. Ideal for premise wiring applications.

ENDR2FB5 .........110 receptacle, 568A and 568B wiring, back-side locking nut

Direct PCB Mount Receptable

Short depth receptacle that solders directly to a Printed Circuit Board (PCB)-intended for OEMs who wish to incorporate a robust, sealed connection into their field equipment.

ENPR1FF5..........Direct PCB-mount, 8-pin through-hole receptable, front coupling nut

Simplify B&B ELECTRONICS

Expand

Integrate

International Headquarters:

707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104

+353 91 792444 Fax +353 91 792445

www.bb-elec.com orders@bb-elec.com support@bb-elec.com

Westlink Commercial Park Oranmore Co. Galway Ireland

www.bb-europe.com orders@bb-elec.com support@bb-europe.com

–

Closure Cap

Maintains sealing integrity when a connector is not mated with the receptacle.

67-0300 .............. IP67 rated closure cap with lanyard

Standard PCB Board Receptacle

Highly flexible, enables an OEM or end-user to solder a cable lead to an internal Ethernet connection.

ENSR1FB5............. Receptacle with PC board

ENSR1FB5C305....Receptacle with PCB & 12” of cable (1oBase-T)

PRODUCT INFORMATION

ENxxHarshDutyCables-0903-2/3

Bulkhead Passthrough

To bring Ethernet into a cabinet or control box, simply create the sealed connection on the outside of the enclosure, and run a commercial patch cord from the backside RJ-45 jack to your PLC, I/O, or Ethernet Control Board. No conduit entry is required.

ENSP1F5 ............RJ-45 Bulkhead passthrough with backside jack

ENSP1F5C305....RJ-45 Bulkhead passthrough with 12” of patch cord

Receptacle Specifications

O-Ring Material: Nitrile Rubber Receptacle Shell Material: Acrylonitrile-Butadiene-Styrene (ABS)—standard version Knockout Hole for Receptacle: 1.031 Mating Thread: UNC 1” - 14 Operating Temperature: -20 to 80 °C Return Loss: 5 dB @ 100 MHZ Shock/Vibration: Per IEC 60068-2-6

Simplify B&B ELECTRONICS

Expand

Environmental Rating: IEC IP67

TIA/EIA Rating

110 Punchdown: Category 5e compliant Bulkhead Passthrough: Category 5e compliant Direct PCB Mount: Category 5 compliant Standard PC Board: Not Rated—additional customer termination is required

RJ-45 Jack

Base Material: Copper alloy w/30 µ -inches, gold alloy Underplating: 2.54 microns of nickel Mating Cycles: 250, minimum Current Rating: 1.5 Amp Voltage Rating: 125 VDC