B&B Electronics EIRSP1 Datasheet

www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
Specifications
Ethernet Connection
RJ-45
Lines Protected
All 8
Protocols
802.11af (Modes A&B)
Speed
10/100 BaseT
Clamping Voltage
60 V
Peak Pulse Power
600 W
Peak Surge Current
1000 Amps
Capacitance
<50 pF
Response Time
<5 nS
Operating Temperature
-40 to 176 F (-40 to 80 C)
Storage Temperature
-40 to 185 F (-40 to 85 C)
Operating Humidity
0 to 95% Non-condensing
Enclosure
Plastic, IP 30 DIN Rail Case
Dimensions
1.2x4.7x3.4 in (3.0 x11.9 x8.6 cm)
MTBF
131960 Hours
MTBF Calculation Method
Parts Count Reliability Prediction
Compliance
CE, FCC, UL
UL File Number
E222870
CE / FCC DoC available
for download.
RoHS
Yes
Wiring
Wire Type
Copper Wire Only
One conductor per terminal
Wire Range
14 to 22 AWG
Tightening Torque
1.7 lb-in
Wire Temperature Rating
105 C minimum (sized for
60 C ampacity)
Ordering Information
EIRSP1
Industrial Ethernet Surge
Protector
Accessories
DRPM25
Panel Mount Adapter
EIRSP1
Industrial Ethernet Surge Protector
Space Saving IP30 Din Rail Enclosure Protects all Eight CAT 5 Lines Power Over Ethernet Compatible
The Elinx™ EIRSP1 Industrial Ethernet Surge Protector is designed to protect all eight lines used in a standard CAT5e Ethernet cable. It is compatible with 10/100BaseT networks and 802.11af (Modes A & B) Power Over Ethernet. Mode A applies power to the data pairs, pins 1/2 and 3/6. Mode B applies power to the unused pairs, pins 4/5 and 7/8. Network connections are made using RJ-45 connectors. Grounding is accomplished using a ground lug which accepts 14 to 22 AWG wire. Stranded or braided cable is recommended with a three foot maximum run to Earth Ground.
p/n 8440 EIRSP1-0812ds page 1/1
©2009 B&B Electronics. All rights reserved
Loading...