B&B Electronics EIRP610-2SFP-T Datasheet

Managed Industrial Ethernet Switch
2 GB RJ-45/SFP Ports, 8 PoE Ports

EIRP610-2SFP-T

PRODUCT FEATURES

• Eight10/100BaseT802.3afendpointPoEinjectorports

• TwoRJ-45/SFPcomboslotsforGigabitEthernet

• Redundantringtechnologyforfastrecovery

• Wideoperatingtemperature

• DINRailorPanelMount

• NEMATS2

The EIRP610-2SFP-T is a 10 Port Managed Industrial Gigabit Ethernet
Switch. In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP
Combo ports to accommodate Gigabit Ethernet.

Small Form-factor Pluggable (SFP) Port: The SFP Ports provide
flexibility when planning a network. Modules are available in multiple
fiber formats. If an SFP module is not inserted, the associated combo port
can be used with standard RJ-45 copper.
High-Speed Transmissions: The switch includes a switch controller
that automatically senses transmission speed (10/100/1000 Mbps on two
RJ45/SFP combo ports; 10/100 on eight PoE RJ45 copper ports).
The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the
requirement for a crossover cable. Each port is buffered and supports
store-and-forward protocol.
Dual Power Input: To reduce the risk of power failure, the switch has
two 48 VDC power inputs. If the power fails, the switch will automatically
use the secondary power input. Also, if the power goes out the
corresponding P1 or P2 LED will go out and the Fault LED will light. The
contacts for the alarm output will also open.

Flexible Mounting: IP30 metal enclosure - DIN or Panel mounted.
Managed: Powerful management functions including SNMP, LACP, VLAN,

Port Trunking, Port Mirroring, Redundant Ring Technology, and Spanning
Tree/Rapid Spanning Tree Protocol.
Power Over Ethernet (PoE): The eight 10/100 ports are classified as
power sourcing equipment (PSE). These ports can be used to power
IEEE 802.3af compliant powered devices (PD), eliminating the need for a
separate power supply for each device.
Wide Operating Temperature: With an operating temperature of -40
to 75°C (-40 to 167°F), this switch is suitable for use in harsh industrial
environments.
Easy Troubleshooting: There are two LED indicators for each port that
display the link status and transmission speed. Three LED indicators for
power (P1, P2 and Fault) show power status. FWD LEDs on each PoE port
indicate when a powered device is connected. These indicators allow
you to quickly diagnose and correct problems and ensure your network
remains reliable.

ORDERING INFORMATION

MODEL NUMBER DESCRIPTION

EIRP610-2SFP-T

ACCESSORIES

SDR-240-48 - DIN-Rail Power Supply, 10A, 240W, 48V
C5UMB3FBL - 3 ft. - Blue - Category 5e UTP Patch Cord
DFMM-LCLC-1M - Multi-Mode Duplex Fiber Cable, LC To LC, 1 Meter
DFSM-LCLC-1M - Single-Mode Duplex Fiber Cable, LC To LC, 1 Meter

SFP-1000SX-M-550M-T - SFP Module, 1000Base-SX, Multi-mode 550m, LC

Connector (-40 to 85°C)
SFP-100FX-M-2KM-T - SFP Module, 100Base-FX, Multi-mode 2km, LC Connector
(-40 to 85°C)
SFP-1000LX-S-10KM-T - SFP Module, 1000Base-LX, Single-mode 10km, LC
Connector (-40 to 85°C)
SFP-1000LX-S-20KM-T - SFP Module, 1000Base-LX, Single-mode 20km, LC
Connector (-40 to 85°C)
SFP-100FX-S-30KM-T - SFP Module, 100Base-FX, Single-mode 30km, LC
Connector (-40 to 85°C)

MECHANICAL DIAGRAM

6.2 cm

2.44 in

Industrial Gigabit Switch (8 CU, 2 CU/SFP)
Power Over Ethernet Sourcing

8.4 cm

3.31 in

13.1 cm

5.16 in

www.bb-elec.com

|

EIRP610-2SFP-T_3713ds

Managed Industrial Ethernet Switch

2 GB RJ-45/SFP Ports, 8 PoE Ports

EIRP610-2SFP-T

SPECIFICATIONS

REGULATORY

Approvals

Free Fall IEC60068-2-32
Shock IEC60068-2-27
Vibration IEC60068-2-6

IEEE STANDARDS

IEEE 802.3 802.3. 10Base-T Ethernet
IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.3f Power over Ethernet
IEEE 802.3d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tag
IEEE 802.1x User Authentication (RADIUS)
IEEE 802.1ab LLDP

NETWORK SPECIFICATIONS

Architecture

Transfer Rate

Buffer 1 MB
MAC Table 8K
Flash ROM 4 MB
DRAM 32 MB

Other

INTERFACE

RJ-45 Ports

CU/SFP 2 x Mini-GBIC SFP Combo Ports

LED

POE

Ports 1 through 8

Standard

Capacity 15.4W per port
Pin Assignment 1 & 2 – VCC(+), 3 & 6 – VCC(-)

SOFTWARE FEATURES

Management SNMP v1, v2C, v3, Web, Telnet, CLI

SNMP MIB

FCC, CE, UL, NEMA TS2
UL File Number: E173795

Back-plane (Switching Fabric): 5.6Gbps
Throughput (Full-dux): 3.3Mpps@64bytes
14,880 pps Ethernet Port
148,800 pps Fast Ethernet Port
1,488,000 pps Gigibit Fiber Ethernet

Broadcast Storm Filtering
CSMA/CD

8 x 10/100BaseT, 2 x10/100/1000,
Auto MDI/MDI-X

P1, P2 (Green) to indicate power
Fault (Red) to indicate fault
Mater (Green) to indicate ring master
Link Activity on 10/100 ports (Green)
Full Duplex / Collision (Amber)
SFP LNK/ACT (Green)
1000T LNK/ACT (Green)
1000M (Green)
FWD on PoE ports to indicate if a powered
device is connected

802.3af End Point Alternative A
Power Source Equipment (PSE)

RFC 1215 Trap, RFC1213 MIBII,
RFC 1157 SNMP MIB, RFC 1493 Bridge
MIB, RFC 2674 VLAN MIB, RFC 1643,
RFC 1757, RSTP MIB, Private MIB, LLDP
MIB

VLAN

Port Trunk w/LACP 4 trunk groups / 4 trunk members

LLDP

Spanning Tree

X-Ring

Quality of Service

Class of Service

Port Security

Port Mirror Supports TX, RX, and both packet

IGMP

IP Security

Login Security 802.1X Authentication / RADIUS

Bandwidth Control

Flow Control Flow control full-dux, backpressure half-dux
System Log System Log and remote system log server
SMTP SMPT SVR and 6 e-mail accounts for alerts

SNMP Trap

DHCP Client, Server, Port and IP Binding

DNS

SNTP SNTP to synchronize system clock
Firmware Update TFTP update, backup and restore

POWER

Input Voltage

Power Connection Removable Terminal Block
Wire Size 12 to 24 AWG

Power Use

Fault Output 1 Relay Output – Normally Closed

ENVIRONMENTAL

Operating Temperature - 40 to 75°C (-40 to 167°F)
Storage Temperature - 40 to 85°C (-40 to 185°F)
Operating Humidity 0 to 95%

MECHANICAL

Enclosure IP30 Metal Enclosure
Mounting 35 mm DIN Rail or Panel Mount Attachments
Dimensions 6.2 x 8.4 x 13.1 cm (2.44 x 3.31 x 5.16 in)

Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)
VLAN ID (1 to 4096), GVRP (256 groups)

Allows the switch to advertise its
Identification and capabilities on the LAN

802.1d Spanning Tree

802.1w Rapid Spanning Tree
Dual Homing, Ring Coupling, Dual Ring
topologies. Recovery time below 20mS
Determined by port, tag, IPv4 type of
service, and IPv4/IPv6 different service

802.1p class of service, 4 priority queues
per port
Supports 100 static MAC entries and 100 MAC Filter
entries

IGMP Snooping v1, v2 (256 multi-cast
groups and IGMP Query
10 IP address entries for permission to
access management functions

Ingress Packet Filter and Egress Packet
Limit. The egress rate control supports
all packet types. Limit rates are: 100K to
102400 Kbps (10/100) and 100 K to
256000 Kbps (1000). Ingress packet
Filter Type combination rules are
Broadcast, Multi-Cast, Unknown Unicast,
Broadcast/Multi-cast, Broadcast only, and
all packets.

Cold Start, Link Down, Link Up, Authorization
Fail, PD Disconnect (PoE port event)

DNS client with primary and secondary
DNS server

Dual 48 VDC Inputs
Reverse Polarity Protection

9.6 Watts (Without PoE Load)
116 Watts (Full PoE Load)

[e-mail]
[e-mail]

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]