Page 1
©2010 B&B Electronics. All rights reserved
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
EIR-EXTEND-C
Ethernet Coaxial Extender for 10/100 Networks
Extend Ethernet Coaxial Connections Up to 8530 Feet
Functional Description
The EIR-EXTEND-C is a point-to-point Ethernet Extender designed to operate in harsh environments
making use of existing coaxial cable. Ethernet connections can be made up 8,530 feet using existing coaxial
cable. The Ethernet Extender fully complies with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX
standards. The EIR-EXTEND-C functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and
is tested for functional operation @ -40°C to 85°C (-40°F to 185°F).
The perfect solution for legacy surveillance infrastructure upgrades moving from analog to IP-based, as no
new cable is needed - saving time, money and labor cost. Installation is easy with a single switch setting;
one end is set for local and the other remote. The EIR-EXTEND-C is used in pairs, one at each end of your
existing coaxial cable.
Features
One 10/100Base TX (TX) Ethernet port with RJ-45 connector
Auto negotiation of speed and duplex mode on TX port
Auto MDI/MDIX on Ethernet port
IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX compliant
Line port uses BNC connector or F-Type connector
Line port link is full-duplex up to 85Mbps over existing coaxial cable
One DIP switch for configuring local or remote mode
Status LED’s for monitoring and connection status
Redundant power inputs with Terminal Block and DC Jack
Ordering Information
Model Number
Description
EIR-EXTEND-C
Hardened 10/100BASE-TX Ethernet Copper Extender Over Coaxial Cable
Accessories
MDR-40-24
24VDC, 1.7A DIN Rail Power Supply, Slim-line
PS12VDC3P
Hardened AC Power Adaptor, 12VDC, 36W, US Plug
EIRPMKT
Optional Panel Mount Kit for EIR-X series
EIR-EXTEND-C-1212-ds - 1/4
Page 2
©2010 B&B Electronics. All rights reserved
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
Specifications
Technology
Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x, Ethernet over VDSL
Protocols: Transparent to higher layer protocols
Processing Type: IEEE802.3x Full-duplex flow control
Interface
Ethernet Port:
RJ-45, 10/100Base-TX Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX
Speed:
10/100Mbps
Distance:
328ft. (100meters)
Cable:
10Base-T: UTP CAT. 3, 4, 5 (2-pair wire), 100Base-TX: UTP CAT. 5 (2-pair wire)
Extender Line Port:
BNC Coaxial
Speed:
1/5/10/20/30/40/50/60/70/75Mbps
Distance:
8,530ft. (2,600meters)
Cable:
Coaxial Cable (5C2V / RG6AU)
Power
Environmental
Input Voltage:
12 to 48VDC (Terminal
Block); 12VDC (DC Jack)
Operating
Temperature:
-40°C to 75°C (-40°F to 167°F)
Power Consumption:
7.2W Max. 0.6A@12VDC,
0.15A@48VDC
Storage
Temperature:
-40°C to 85°C (-40°F to 185°F)
Overload Protection:
Present
Humidity:
5% to 95% (non-condensing)
Reverse Polarity Protection:
Present
MTBF:
265,154 hours
MTBF Calculation:
Parts count reliability prediction @ 25°C
Mechanical
Enclosure:
Aluminum case, IP30
Dimensions:
1.97" (W) x 4.33" (D) x 5.31" (H); 5.0cm (W) x 11.0cm (D) x 13.5cm (H)
Weight:
1.76 lbs., (800g)
Installation:
DIN-Rail (Top hat type 35mm), Panel Rack Mounting
Regulatory Approvals
RoHS - Yes
Safety:
UL508
EMI:
FCC Part 15, Class A
EN61000-6-4
EN55022, EN61000-3-2, EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards) Contact: + / - 4KV; Criteria B Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards) Signal Ports: + / 4KV; Criteria B D.C. Power Ports: + / 4KV; Criteria B
EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Line; Criteria B D.C. Power Ports: + / -
0.5KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A D.C.
Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock
Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.)
EIR-EXTEND-C-1212-ds - 2/4
Page 3
©2010 B&B Electronics. All rights reserved
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
Top LEDs (BNC Line Connections)
LEDs
Status
Speed
Distance
1
Green
1~ 5Mbps
up to 2600M
Amber
6~10Mbps
up to 2400M
2
Green
11~16Mbps
up to 2000M
Amber
17~20Mbps
up to 1800M
3
Green
21~29Mbps
up to 1600M
Amber
30~43Mbps
up to 1400M
4
Green
44~54Mbps
up to 1200M
Amber
55~63Mbps
up to 1000M
5
Green
64~74Mbps
up to 600M
Amber
75~85Mbps
up to 200M
Front Panel LED’s (Ethernet and Line Connections)
Port
LEDs
Status
Description
Ethernet (RJ-45)
Power1
Power2
Power3
Steady
Power on
Off
Power off
Link/ACT
Steady
Valid Ethernet connection established
Flashing
Transmitting or receiving Ethernet data (ACT stands for ACTIVITY)
Off
No valid Ethernet connection nor transmitting/receiving Ethernet data
FDX
Steady
Ethernet connection in full duplex mode (FDX stands for FULL-DUPLEX)
Flashing
Collision occurred
Off
Ethernet connection in half-duplex mode
Line (BNC)
Remote
Steady
Operating in remote mode
Local
Steady
Operating in local mode
Error
Steady
Error occurred
Link
Steady
A valid connection established between local & remote
EIR-EXTEND-C-1212-ds - 3/4
LED Indicators
Page 4
©2010 B&B Electronics. All rights reserved
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PRODUCT INFORMATION B&B ELECTRONICS
EIR-EXTEND-C-1212-ds - 4/4
Diagrams
Loading...