B&B Electronics EIR508 User Manual

Quick Start Guide
Elinx Managed Ethernet Switch
EIR508 Series
1
o Ethernet Switch o CD with Support Manual o This Quick Start Guide o Panel Mount Bracket
2
Items Included
Default Settings
o IP Address: 192.168.16.1 o Subnet Mask: 255.255.255.0 o Gateway: 192.168.16.254 o User Name: root, Password: root
3
EIR508 Series-5107qsg
Pos Status Description
DIP Switch Settings
OFF Disable port 1 Alarm
1
2
3
4
5
6
7
8
9
Enable port 1 Alarm
ON
(If port 1 link fails, the fault LED will light)
OFF Disable port 2 Alarm
Enable port 2 Alarm
ON
(If port 2 link fails, the fault LED will light)
OFF Disable port 3 Alarm
Enable port 3 Alarm
ON
(If port 3 link fails, the fault LED will light)
OFF Disable port 4 Alarm
Enable port 4 Alarm
ON
(If port 4 link fails, the fault LED will light)
OFF Disable port 5 Alarm
Enable port 5 Alarm
ON
(If port 5 link fails, the fault LED will light)
OFF Disable port 6 Alarm
Enable port 6 Alarm
ON
(If port 6 link fails, the fault LED will light)
OFF Disable port 7 Alarm
Enable port 7 Alarm.
ON
(If port 7 link fails, the fault LED will light)
OFF Disable port 8 Alarm
Enable port 8 Alarm
ON
(If port 8 link fails, the fault LED will light)
OFF Disable the ring master function.
Enable the switch as the ring master
ON
in the redundant ring group.
4
LED Status Meaning
Power
Power 1
Power 2
Fault
R.M.
LNK/ACT Ports 7 & 8
FDX/COL Ports 7 & 8
10/100 Ports
5
o Record the switch’s MAC Address in the space
o Select a mounting location and install with the attached o Connect power to the switch
Green The Switch is powered on Off The Switch is powered off Green Power Source 1 is available Off Power Source 1 is unavailable Green Power Source 1 is available Off Power Source 2 is unavailable Yellow Power Source failure or Port Failure Off Normal Operation Green Ring Master (Master of a redundant ring) Off The switch is not a Ring Master Green The port is linked Blinking The port is receiving or transmitting packets Off No device attached Yellow Full Duplex Mode Blinking Data Collision Off Half Duplex Mode Green Yellow
Hardware Installation
provided. The MAC Address is printed on the product label. Provide the MAC Address to your Network
Administrator. The Network Administrator should provide an IP Address, Subnet Mask, and Gateway.
DIN rail clip or included panel mount kit.
o 12 to 48 VDC o Redundant DC input is available with fault
contacts.
LED Chart
815-433-5100 Fax 433-5104 www.bb-elec.com
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445
orders@bb-elec.com support@bb-elec.com
.com orders@bb-europe.com support@bb-europe.com
6
7
o Connect a stand alone PC to a port on the switch.
Change the PC’s network IP Address to allow it to connect to the switch (ex: 192.168.16.2). Use the default subnet mask and gateway.
o Launch the PC’s web browser and navigate to the
switch by typing the switch’s IP address in the browser address window.
o Navigate the web page by clicking on the links located
on the top of the web page.
o Click on the IP Configuration link at the top of the web
page.
o Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator.
o Save changes o Disconnect the stand alone PC and connect the switch
to the Network.
o Inform your Network Administrator that the IP Address
has been changed.
o NOTE: The User Manual contains instructions for
assigning the IP Address from a DHCP Server.
Log into the Switch
IP Configuration
8
o This step should be accomplished by your Network o Log onto the switch from a network PC.
o Click on the Security Manager link on the top of the web o Enter the new User Name and Password. Record this
o Click the Apply button. o Click the “Save Configuration” link at the top of the web
USER NAME: ______________________________________ PASSWORD:_______________________________________ MAC ADDRESS: ____________________________________ IP ADDRESS:_______________________________________
User Name and Password
Administrator.
page. information in the space provided below. File this
document for future reference.
page.
Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.
EIR508 Series-5107qsg
815-433-5100 Fax 433-5104 www.bb-elec.com
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445
orders@bb-elec.com support@bb-elec.com
.com orders@bb-europe.com support@bb-europe.com
Loading...