B&B Electronics EIR405-T Datasheet

5 Port Gigabit Industrial Ethernet Switch

EIR405-T

PRODUCT FEATURES

• 510/100/1000Base-TEthernetports

• 3000VEFT&6000VESDprotection

• Dual12to48VDCpowerinputs

• Wideoperatingtemperature

• DINorpanelmountoptions

• NEMATS2

The EIR405-T is a 5 Port Unmanaged Industrial Gigabit Ethernet Switch.
Packed full of rugged features, this switch is perfect for your high speed
industrial network.

High-Speed Transmissions: The EIR405-T includes a switch controller
that automatically senses transmission speed (10/100/1000 Mbps).
The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the
requirement for a crossover cable. Each port is buffered and supports
store-and-forward protocol.

Dual Power Input: To reduce the risk of power failure, the EIR405-T
provides two 12 to 48 VDC power inputs. If the power fails, the switch will
automatically use the secondary power input. Also, if the power goes out
the corresponding P1 or P2 LED will go out and the Fault LED will light.
The contacts for the alarm output will also open.

Flexible Mounting: The switch features a space saving IP30 metal
enclosure that can be DIN or Panel mounted.

Transient Protection: The power line input on the EIR405-T offers
protection from up to 3,000 V EFT. The Ethernet ports offer up to 6,000 V
ESD protection. These features make the switch reliable and suitable for
use in harsh electrical environments.

Wide Operating Temperature: With an operating temperature of -40
to 75°C (-40 to 167°F), this switch can be used in harsh industrial
environments.

ORDERING INFORMATION

MODEL NUMBER DESCRIPTION

EIR405-T 5 Port Industrial Gigabit Switch

ACCESSORIES

MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power
MDR-40-24 - DIN rail mount power supply 24VDC, 1.7 A output power
C5UMB7FBG - Category 5e, 7 ft. (2.1 M), Grey
EIRSP1 - Industrial DIN rail mount Ethernet Surge Suppressor

Easy Troubleshooting: There are two LED indicators for each port that
display the link status and transmission speed. Three LED indicators
for power (P1, P2 and Fault) show power status. These indicators allow
you to quickly diagnose and correct problems and ensure your network
remains reliable.

www.bb-elec.com

|

EIR405-T_3713ds

5 Port Gigabit Industrial

SPECIFICATIONS

INTERFACE

RJ-45 Ports 5 x 10/100/1000BaseT, Auto MDI/MDI-X
ESD Protection 6000V ESD Protection

LED Indicators

POWER

Input Voltage

Power Connection Removable Terminal Block
Wire Size 12 to 24 AWG
Power Use 4.6 Watts
Fault Output 1 Relay Output – Normally Closed
EFT Protection 3000 V EFT Protection

ENVIRONMENTAL

Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Humidity 0 to 95%

MECHANICAL

Enclosure IP30 Metal Enclosure
Mounting 35mm DIN Rail or Panel Mount Attachments
Dimensions 3.0 x 9.7 x 14.0 cm (1.2 x 3.8 x 5.5 in)

P1 (Power 1), P2 (Power 2), Fault (Power Fault), RJ-45
Ports have 2 LED’s to indicate LINK and ACTIVITY

Dual 12 to 48 VDC Inputs
Reverse Polarity Protection

Ethernet Switch

EIR405-T

REGULATORY

Approvals

Free Fall IEC60068-2-32
Shock IEC60068-2-27
Vibration IEC60068-2-6

IEEE STANDARDS

IEEE 802.3 802.3. 10Base-T Ethernet
IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back Pressure

NETWORK SPECIFICATIONS

Architecture

Transfer Rate

Buffer 136 Kbits
MAC Table 8K
Jumbo Frame 9Kbytes

Other

FCC, CE, UL, NEMA TS2
UL File Number: E173795

Back-plane (Switching Fabric): 10Gbps
Throughput (Full-dux): 14.88Mpps@64bytes
14,880 pps Ethernet Port
148,800 pps Fast Ethernet Port

Broadcast Storm Filtering
CSMA/CD

MECHANICAL DIAGRAM

[e-mail]
[e-mail]

International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]