B&B Electronics EIP308 User Manual

Description

ModeI EIP308 is an 8-port 10/100 switch designed for the not-so-friendly industrial environment. The unit is housed in a rugged metal enclosure ready to be mounted on a DIN rail or panel. The switch is an unmanaged Layer 2 switch that provides auto MDI/MDIX crossover for easy plug-and-play applications.

LEDs indicate power, speed and link/activity for easy visual diagnostics. External power supply is connected to three 2position pluggable terminal blocks. A 9-30 VDC is the main power supply input. It also has a redundant 9-30 VDC for secondary DC source. If that is not enough, 24 VAC yields the third option for power supply. B&B Electronics’ power supply model 12DC1AST (9-30 VDC @ 1000mA) is required, not included.

Features

• Fully IEEE 802.3 and 802.3u compliant • Vertical or flat panel mountable

• 8-port unmanaged Layer 2 switch • Wide power input 9-30 VDC

• Auto detecting 10BaseT/100BaseTX • Redundant wide power input 9-30 VDC

• Auto MDI/MDIX crossover for plug and play • 24 VAC power input

• Ruggedized metallic enclosure • Speed and link/activity diagnostic LEDs

• DIN rail mount with #DRAD35 adapters • Unique load LED’s for quick network status

Applications

• Building automation • Process control

• Ethernet I/O • Motion control

• Remote data acquisition • Environmental control

• Communications gateway • Machine monitoring

erts B&B ELECTRONICS PRODUCT INFORMATION

• PLC and operator interface • Factory floor Ethernet networks

Connections

Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your devices since the switch supports auto crossover. External power supply is connected using one of the three 2-position pluggable terminal blocks for convenience. Table 1 shows the RJ45 pinouts and Table 2 shows the LED indicators.

Pin Number Signal

Table 1

1 TX+ 2 TX3 RX+

4 not used

5 not used 6 RX7 not used 8 not used

EIP308-1904ds - 1/2

Model EIP308

8-Port 10/100

Ethernet Switch

PWR

LNK/ACT

SPD

Table 2

LED Color On Off Blinking

SPD yellow 100 10 reset/error LNK green link no link data

PWR red power no power NA

International Headquarters:

707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104 www.bb-elec.com orders@bb-elec.com support@bb-elec.com

Your Serial and Data Communication Ex

+353 91 792444 Fax +353 91 792445

Westlink Commercial Park Oranmore Co. Galway Ireland

www.bb-europe.com orders@bb-elec.com support@bb-europe.com

10.5mm

03.5mm

Specification Summary

Switch Type: Full IEEE 802.3, 802.3u, & 802.3x compliant Unmanaged Layer 2 Main Features: Store-and-forward scheme for packet transfer Automatic address learning, aging and migration Packet classification 802.1p QoS priority queues Port-based VLAN

Speed: Autodetecting 10/100 Mbps LED: Per port speed indicator

Per port activity indicator Per unit power indicator Network load indicator (12%, 25%, 50%, 50+%)

Frame Buffer: 256KB share by all ports MAC Buffer: 2KB (automatic learning, aging and migration) Isolation: 1500 VDC isolation magnetics Bandwidth: 1.4 Gbps high performance memory bandwidth Connections: 8 RJ45 female jacks (auto MDI/MDIX crossover)

2-position pluggable terminal block x 3 Power Required: Main DC = 9 – 30 VDC @ 6 W maximum Redundant DC = 9 – 30 VDC @ 6 W maximum Auxiliary AC = 24 VAC @ 6 W maximum Approval: FCC Class A, CE, shock, free fall, vibration

erts B&B ELECTRONICS PRODUCT INFORMATION

Temperature: 0 to 70°C (32 to 158°F)

Dimensions: 16.5 x 11.9 x 3.5 cm (6.5 x 4.7 x 1.4 in)

07mm

6.48 in

11.5mm

EIP308-1904ds - 2/2

PORT 8

PORT 7

PORT 2

PORT 6

PORT 4

PORT 3

12VDC@1000MA

PORT 5

12.5%

25%

LOAD

50+%

50%

1.36 in

UPLINK PORT 1

2.35 in

1.00 in

PWR

LNK/ACT

SPD

4.70 in

12DC1AST

PLUGGABLE TERMINAL BLOCK

Manufacturer’s Name: B&B Electronics Manufacturing Company Manufacturer’s Address: P.O. Box 1040 707 Dayton Road

Model Number: EIP308 Description: 8 Port 10/100 Ethernet Switch Type: Light industrial ITE equipment Application of Council Directive: 89/336/EEC Standards: EN 55022 EN 61000-6-1 EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11) IEC60068-2-27 IEC60068-2-32 IEC60068-2-6

William H. Franklin III, Director of Engineering

Ottawa, IL 61350 USA