B&B Electronics DS-PCIE-100 User Manual

DS-PCIE-100

User Manual

Ver. 2.00

All brand names and trademarks are properties of their

respective owners.

May/07 MN2000000083

1

Features and Benefits

Features z Compliant with PCI Express Base Specification

1.0a

z Supports 2 x 16550 Fast UART serial ports
z Serial data transfer rate up to 115200bps
z Support Windows® 2000, XP, Server 2003, Vista

Bus z PCI-Express X1

Connectors z 2 x DB9 male serial connectors

Package Contents

z 1 x DS-PCIE-100 Card
z 1 x Driver CD

System Requirements

z Windows® 2000/XP/Server 2003/Vista
z PCI Express-enabled system with an available PCI Express slot

May/07 MN2000000083

2

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down
firmly.

5. Replace the slot bracket’s holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver
installation.

For Windows® 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes, then click

Next.

4. Insert the Driver CD, type in the following path

May/07 MN2000000083

3