B&B Electronics ADAM-6520-I-L User Manual

ADAM-6520
5-Port Industrial 10/100 Mbps Ethernet Switch
User Manual
Copyright
The documentation and the software included with this product are copy­righted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this man­ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reli­able. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This Manual Covers the Following Models
• ADAM-6520
• ADAM-6520I
• ADAM-6520L
Part No. 2003652013 5th Edition
Printed in Taiwan May 2006
ADAM-6520 User Manual ii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its prod­ucts will be free from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal­lation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test­ing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your man­ual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for war­ranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
iii
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ­ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera­tion of this equipment in a residential area is likely to cause harmful inter­ference in which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
Step 1. Visit the Advantech web site at www.advantech.com/support
where you can find the latest information about the product.
Step 2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional assistance. Please have the following information ready before you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, appli­cation software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Document Feedback
To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: support@advantech.com
ADAM-6520 User Manual iv
Contents
Chapter 1 Overview .......................................................... 2
1.1 Introduction ....................................................................... 2
1.1.1 High-Speed Transmission .............................................. 2
1.1.2 Flexible Mounting .......................................................... 2
1.1.3 Protection for Power Line & Ethernet Port ................... 2
1.1.4 Wide Operating Temperature Range ............................. 3
1.1.5 Easy Troubleshooting .................................................... 3
1.2 Features ............................................................................. 3
1.3 Specifications .................................................................... 4
1.4 Ordering Information ........................................................ 5
Chapter 2 Installation ....................................................... 8
2.1 Packing List....................................................................... 8
2.2 Top / Front / Rear View .................................................... 9
2.2.1 Dimensions (units:mm) ................................................ 9
Figure 2.1:Top View ...................................................... 9
Figure 2.2:Front Panel ................................................... 9
Figure 2.3:Rear View ..................................................... 9
2.3 LED Indicators ................................................................ 10
2.4 Mounting ......................................................................... 11
2.5 Network Connection ....................................................... 13
2.6 Power Connection ........................................................... 13
Table 2.1:ADAM-6520 Module LED Definitions ...... 10
Figure 2.4:Panel Mounting .......................................... 11
Figure 2.5:DIN-rail Mounting ..................................... 12
Figure 2.6:Piggyback Stacking .................................... 12
2.5.1 Connection to Devices ................................................. 13
2.5.2 Connection to other Hubs or Switches ........................ 13
v
ADAM-6520 User Manual vi
Loading...
+ 14 hidden pages