B&B Electronics 7012FX2-SC User Manual
THE INDUSTRIAL NETWORK COMPANY
7012FX2
Fully-Managed Switch
7000 SERIES
PRODUCT FEATURES
• Eight 10/100BaseTX RJ-45 ports
• Two 100BaseFX ports, ST or SC style
• Two SFP gigabit ports
• -40oC to 70oC operating temperature
• Onboard temperature sensor
• ESD and surge protection diodes on all ports
• Auto-sensing 10/100BaseTX, duplex, and MDIX
• Store-and-Forward technology
• Rugged DIN-rail enclosure
• Redundant power inputs (10-49VDC)
FULLY MANAGED FEATURES
• SNMP v1, v2, v3 and web browser management
• Confi guration backup via optional SD card
• Detailed ring map and fault location charting
• N-Ring™ technology with ~30ms healing
• N-Link™ redundant N-Ring coupling
• N-View™ OPC monitoring
• RSTP - IEEE 802.1D
• IGMP auto-confi guration
• 802.1Q tag VLAN and port VLAN
• 802.1p QoS, port QoS, and DSCP
• EtherNet/IP™ CIP messaging
• LLDP (Link Layer Discovery Protocol)
• Trunking and port mirroring
• 802.1d, 802.1w, 802.1D RSTP
• DHCP server, option 82 relay, option 61, IP fallback
• Local port IP addressing
• Port security—MAC address-based
BUILT FOR EXTREME CONDITIONS
The compact N-TRON® 7012FX2 fully-managed industrial Ethernet switch is ideal
for industrial and utility applications that demand extreme performance under harsh
conditions. Housed in a rugged industrial metal enclosure, the switch offers a powerful
combination of eight 10/100BaseTX copper ports, two 100Base fi ber ports, two SFP
gigabit ports, and redundant power inputs for robust network support. The device boasts
exceptional MTBF and extended tolerances to shock, vibration, temperature fl uctuations
and noise—common elements in factory fl oor control networks, utilities, wastewater
treatment, wind turbines, rail car, intelligent traffi c control and transportation applications.
ADVANCED RING TECHNOLOGY
Advanced N-Ring technology provides expanded capacity, detailed fault diagnostics,
and fast ~30ms healing time for N-TRON-based rings. The integrity of the ring is
continually checked by sending heart beat packets around the network. If an error is
detected, the ring converts to a linear topology within ~30ms and communication is
immediately restored. A detailed ring map and fault location chart may be accessed by
the ring manager's web browser or the OPC server. Each N-Ring accommodates up
to 250 fully-managed N-TRON switches. To establish redundancy, N-Link technology
easily connects multiple N-Rings, creating additional pathways to critical applications
and increasing overall resiliency.
MONITORING OPTIONS
N-TRON provides multiple tools to monitor the 7012FX2. The robust web-based
interface provides a convenient dashboard to view and confi gure switch options, as
well as monitor network traffi c, alarms, and trend information. For tightly controlled
environments, N-View OPC server software easily combines with HMI control and
monitoring applications to form a complete surveillance solution for N-View-enabled
switches. The iSNMP Software Suite is also available for link and status monitoring.
For local monitoring, each switch features confi gurable LEDs to indicate power failure
and N-Ring status.
EASY TO USE
The 7012FX2 features auto-sensing and auto-confi guring 10/100BaseTX ports. Each
copper port automatically negotiates for maximum speed and performance but can
be hardcoded through the user interface. A high-speed processor allows wire speed
capability on all ports simultaneously.
RUGGED • RELIABLE • AFFORDABLE
www.n-tron.com
7012FX2
SPECIFICATIONS
Switch Properties
Number of MAC Addresses: 8000
Aging Time: Confi gurable
Latency (typical): 2.6 s
Switching Method: Store-and-Forward
Case Dimensions
Height: 4.3" (10.8 cm)
Width: 3.1" (7.9 cm)
Depth: 4.6" (11.5 cm)
Weight (maximum): 1.4 lbs (0.64 kg)
DIN-Rail Mount: 35mm
Electrical
Redundant Input Voltage: 10-49VDC (regulated)
Input Current (max): 525mA@24VDC
BTU/hr: 44@24VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3A@24V)
Environmental
Operating Temperature: -40oC to 70oC
Storage Temperature: -40
Operating Humidity: 5% to 95% (non condensing)
Operating Altitude: 0 to 10,000 ft.
o
C to 85oC
100 mb Fiber Transceiver Characteristics
Fiber Length 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm
Wavelength 1310nm 1310nm 1310nm 1550nm
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
SFP Gigabit Fiber Transceiver Characteristics
Fiber Length
TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm
RX Sensitivity Max -17dBm -20dBm -22dBm
Wavelength 850nm 1310nm 1310nm 1550nm
Assumed Fiber Loss -3.5 to 3.75 dB/km -0.45dB/km -0.35dB/km -0.25dB/km
550m for 50/125m
275m @62.5/125m*
10km** 40km** 80km**
-24dBm
* SX Fiber Optic Cable
** LX Fiber Optic Cable
Designed to comply with
• IEEE 1613 for electric utility substations
• NEMA TS1/ TS2 for traffi c control
Regulatory Certifi cations
Shock and Vibration (Bulkhead Mounted)
Shock: 200g@10ms
Vibration/Seismic: 50g, 5-200Hz, triaxial
Reliability
MTBF: >2 million hours
Network Media
10BaseT: Cat3 cable
100BaseTX: Cat5 cable
1000BaseT: Cat5e cable
Connectors
10/100BaseTX: Eight (8) RJ-45 copper ports
100BaseFX: Two (2) SC or ST fi ber duplex ports
1000BaseT: Up to two (2) RJ-45 gigabit copper ports
1000BaseSX: Up to two (2) LC duplex gigabit fi ber ports
Recommended Wiring Clearance
Top: 1" (2.6 cm)
Front: 4" (10.2 cm)
Side: 1" (2.6 cm)
Certifi cate
POCC
US.AB28.B06519
Further information regarding this product's regulatory conformity can be found on
the N-TRON website at www.n-tron.com/tech_docs.php
FCC Part 15
Class A
UL Listed
Class I, Div 2
Groups A/B/C/D
E214222
Industry Canada
ICES-003 Issue 3
www.n-tron.com
Loading...