B&B Electronics 509FX-A-SC-ST Datasheet

THE INDUSTRIAL NETWORK COMPANY

The

N-TRON® 509FX

outstanding performance and ease of use. It is ideally suited for
connecting Ethernet enabled industrial and/or security equipment
and can be optionally configured with advanced Ethernet
communication management functions

Series Industrial Ethernet Switch offers

PRODUCT FEATURES

• Full IEEE 802.3 and 1613 Compliance

• NEMA TS1/TS2 Compliance

• American Bureau of Shipping (ABS) Type Approval

• Eight 10/100 BaseTX RJ-45 Ports

• One 100BaseFX Port, ST (shown) or SC

• Extended Environmental Specifi cations

• Auto Sensing 10/100BaseTX, Duplex, and MDIX

• Store-and-forward Technology

• Up to 2.6 Gb/s Backplane Throughput

• Rugged Industrial DIN-Rail Enclosure

• Redundant Power Inputs (10-30 VDC)

• Bi-Color LED's For Link, Speed, Activity & Duplex Status

Advanced Management Features (With -A option only):

• IGMP Snooping

• VLAN

• QoS

• Trunking

• Mirroring

• N-View

Advanced Management Functions

The
easily confi gured using the COM Port (DB 9 Connector located
on the right side of the switch).
IGMP Snooping - Internet Group Management Protocol is a fea­ture that allows the
traffi c intelligently.
VLAN - Virtual Local Area Network allows segmentation of the
switch in order to create two or more separate local area network
domains.
QoS - Quality of Service provides prioritization of network traffi c
in order to provide better network service. The primary goal of
QoS is to improve the latency of prioritized Ethernet packets
required for ring management, real-time and other interactive
applications.
T runking - Trunking (aggregation) enables multiple physical ports
to be linked together and function as one uplink to another
trunking capable switch confi gured in the same manner, thereby
increasing the bandwidth between switches. This c on fi guration
can provide increased bandwidth and redundancy to applications
requiring high levels of fault tolerant operation.
Port Mirroring - This
port to be duplicated and sent to a designated mirror port. Port
mirroring can be used to monitor Ethernet traffi c on the designated
source port using the assigned mirror port.

TM

509FX-A

(Remote Monitoring Using OPC Technology)

offers several management functions that can be

509FX-A

switch to forward and fi lter multicast

N- TRON

509FX-A

function allows the traffi c on one

N-View OPC Switch Monitoring (With -A or -N Option Only)

The

N-TRON

software can be combined with popular HMI software packages
to add network traffi c monitoring, trending and alarming to
any application using
N-View option.
different traffi c variables per port and 5 system level variables
per switch. This information can provide a complete overview
of the network load, service quality, and packet traffi c. OPC
client software can use N-View OPC Server data to resolve
network problems quickly and improve system reliability.

Industrial Packaging and Specifi cations

The

N-TRON 509FX

environments. It is housed in a rugged steel enclosure
that can be DIN-RAIL or panel mounted, and an optional
rackmount kit is also available. The
extended temperature rating, extended shock and vibration specs,
redundant power inputs, and a high MTBF (greater than 2M hours).

Ease of Use

The

N-TRON 509FX

port functions are utilized. The eight 10/100BaseTX ports
are auto sensing and auto configuring. Each copper port is
automatically negotiated for maximum speed and performance
by default. The fiber optic port support full 200Mb/s com­munications via 100BaseFX. Bi-color LED's are provided to
display the link status, link speed and activity of each port as
well as power on/off status.

Performance

The

N-TRON 509FX

Fast Ethernet 10/100BaseTX switching technology. This
technology eliminates network collisions and increases
network determinism. Up to 4,000 MAC addresses are
supported enabling sophisticated and complex network
architectures. A high speed processor and backplane
allows wire speed capability on all ports simultaneously.

N-View OLE for Process Control (OPC) server

N-TRON

N-TRON's

is designed to operate in industrial

requires no setup unless the advanced

uses "state of the art" IEEE 802.3

switches confi gured with the

N-View OPC server collects 41

509FX

comes standard with

509FX Industrial Ethernet Switch Ordering Information

509FX-A-XX-S Eight 10/100BaseTX Ports, One Multimode 100BaseFX Fiber Optic Port
509FXE-A-XX-YY Eight 10/100BaseTX Ports, One Singlemode 100BaseFX Fiber Optic Port

Where: A = A for Advanced Management Features,
or N for N-View,and Blank Otherwise, N-View included in -A;
XX = ST or SC, YY = 15, 40 or 80 for singlemode, blank for multimode
S = Standard Temperature Rating -20ºC to 70ºC, Blank for -40ºC to 85ºC

509FX-A Specifi cations

Switch Properties

Number of MAC Addresses: 4,000
Aging Time: 300 s
Latency Typ.: 2.1 μs
Backplane Speed: 2.6Gb/s

Fiber Transceiver Characteristics

Fiber Length 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max -32dBm -29dBm -34dBm -34dBm
Wavelength 1310nm 1310nm 1310nm 1550nm

Switching Method: Store & Forward

Connectors

Case Dimensions

Height: 2.3" (5.8cm)

10/100BaseTX: Eight (8) RJ-45 Copper Ports
100BaseFX: One (1) SC or ST Duplex Port

Width: 5.5" (13.9cm)
Depth: 3.4" (8.8cm)
Weight: 1.6 lbs (0.8kg)
Din-Rail: 35mm

Electrical

Redundant Input Voltage: 10-30 VDC
Input Current: 260 mA@24V
Inrush: 8.5Amp/0.7ms@24V

Serial Confi guration Port

Com Parameters: 9600,n,8,1

Recommended Wiring Clearance

Front: 4" (10.16 cm)
Side: 1" (2.54 cm)

Regulatory Approvals

FCC/CE (CFR 47, Part 15, Subpart B, Class A)

Environmental

Operating and Storage Temp: -20ºC to 70ºC (Standard)

-40ºC to 85ºC (Extended)

Operating Humidity: 10% to 95%

(Non Condensing)

Operating Altitude: 0 to 10,000 ft.

Shock and Vibration (bulkhead mounting)

Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial

Reliability

MTBF: >2Million Hours

EMC Dir 89/336/EEC, EN 50204, EN 5501 1
EN61000-4-2/3/4/5/6/8/1 1, EN61000-6-2/4
ANSI C63.4, ICES-003

UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A
UL 508 and UL 1604

CAN/CSA-C22.2 No.213, ATEX II 3 G Ex nA
ABS T ype Approval for Shipboard Applications
GOST-R Certifi ed, RoHS Compliant

Designed to comply with:

IEEE 1613 for Electric Utility Substations
NEMA TS1/TS2 for Traffi c Control

Contact Information

* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable

Network Media

10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable

100BaseFX

Multimode: 50-62.5/125μm
Singlemode: 7-10/125μm

® 2009

N-TRON

, Corp.

may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application

N-TRON

of
shall not be liable for any damage resulting from the installation, use, or misuse of this product.

products rests with the end user.

, N-TRON

and the

N-TRON

N-TRON

logo are trademarks of

makes no warranties as to the fi tness or suitability of any

N-TRON

N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL36609USA 6330 Cham / Zg Switzerland
TEL: [phone] TEL: [phone]
FAX: [phone] FAX: [phone]
Website: www.n-tron.com
Email: [e-mail]

, Corp. Product names mentioned herein are for identifi cation purposes only and

N-TRON

Printed in USA.

product for any specifi c application.

REV 090804

N-TRON

Corporation