B&B Electronics 508FXE2-A-SC-40 Datasheet
The
N-TRON® 508FX2
outstanding performance and ease of use. It is ideally suited for
connecting Ethernet enabled industrial and/or security equipment
and can be optionally configured with advanced Ethernet
communication management functions
Series Industrial Ethernet Switch offers
PRODUCT FEATURES
• Full IEEE 802.3 and 1613 Compliance
• NEMA TS1/TS2 Compliance
• American Bureau of Shipping (ABS) Type Approval
• Six 10/100 BaseTX RJ-45 Ports
• Two 100BaseFX Ports, ST (shown) or SC
• Extended Environmental Specifi cations
• Auto Sensing 10/100BaseTX, Duplex, and MDIX
• Store-and-forward Technology
• Up to 2.6 Gb/s Backplane Throughput
• Rugged Industrial DIN-Rail Enclosure
• Redundant Power Inputs (10-30 VDC)
• Bi-Color LED's For Link, Speed, Activity & Duplex Status
Advanced Management Features (With -A option only):
• IGMP Snooping
• VLAN
• QoS
• Trunking
• Mirroring
• N-View
Advanced Management Functions
The
easily confi gured using the COM Port (DB 9 Connector located
on the right side of the switch).
IGMP Snooping - Internet Group Management Protocol is a
feature that allows the
multicast traffi c intelligently.
VLAN - Virtual Local Area Network allows segmentation of the
switch in order to create two or more separate local area network
domains.
QoS - Quality of Service provides prioritization of network traffi c
in order to provide better network service. The primary goal of
QoS is to improve the latency of prioritized Ethernet packets
required for ring management, real-time and other interactive
applications.
T runking - Trunking (aggregation) enables multiple physical ports
to be linked together and function as one uplink to another
trunking capable switch confi gured in the same manner, thereby
increasing the bandwidth between switches. This c on fi guration
can provide increased bandwidth and redundancy to applications
requiring high levels of fault tolerant operation.
Port Mirroring - This
one port to be duplicated and sent to a designated mirror port. Port
mirroring can be used to monitor Ethernet traffi c on the designated
source port using the assigned mirror port.
TM
(Remote Monitoring Using OPC Technology)
508FX2-A
offers several management functions that can be
508FX2-A
switch to forward and fi lter
N- TRON
508FX2-A
function allows the traffi c on
N-View OPC Switch Monitoring (With -A or -N Option Only)
The
N-TRON
software can be combined with popular HMI software packages
to add network traffi c monitoring, trending and alarming to
any application using
N-View option.
different traffi c variables per port and 5 system level variables
per switch. This information can provide a complete overview
of the network load, service quality, and packet traffi c. OPC
client software can use N-View OPC Server data to resolve
network problems quickly and improve system reliability.
Industrial Packaging and Specifi cations
The
N-TRON 508FX2
environments. It is housed in a rugged steel enclosure
that can be DIN-RAIL or panel mounted, and an optional
rackmount kit is also available. The
extended temperature rating, extended shock and vibration specs,
redundant power inputs, and a high MTBF (greater than 2M hours).
Ease of Use
The
N-TRON 508FX2
port functions are utilized. The six 10/100BaseTX ports are
auto sensing and auto configuring. Each copper port is
automatically negotiated for maximum speed and performance
by default. The two fiber optic ports support full 200Mb/s
communications via 100BaseFX. Bi-color LED's are provided
to display the link status, link speed and activity of each port
as well as power on/off status.
Performance
The
N-TRON 508FX2
Fast Ethernet 10/100BaseTX switching technology. This
technology eliminates network collisions and increases
network determinism. Up to 4,000 MAC addresses are
supported enabling sophisticated and complex network
architectures. A high speed processor and backplane
allows wire speed capability on all ports simultaneously.
N-View OLE for Process Control (OPC) server
N-TRON
N-TRON's
is designed to operate in industrial
requires no setup unless the advanced
uses "state of the art" IEEE 802.3
switches confi gured with the
N-View OPC server collects 41
508FX2
comes standard with
508FX2 Industrial Ethernet Switch Ordering Information
508FX2-A-XX Six 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports
508FX2-A-XX-S* Six 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports
508FXE2-A-XX-YY Six 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports
Where: A = A for Advanced Management Features,
or N for N-View, and Blank Otherwise, N-View included in -A;
XX = ST or SC, YY = 15, 40 or 80 for singlemode, blank for multimode
*S = Standard Temperature Rating -20ºC to 70ºC, Blank for -40ºC to 85ºC
508FX2-A Specifi cations
Switch Properties
Number of MAC Addresses: 4,000
Aging Time: 20s, Programmable (-A)
Latency Type.: 2.1 μs
Backplane Speed: 2.6Gb/s
Switching Method: Store & Forward
Case Dimensions
Height: 2.3" (5.8cm)
Width: 5.9" (15.0cm)
Depth: 3.8" (9.7cm)
Weight: 1.6 lbs (0.8kg)
Din-Rail: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current: 380 mA@24V
Inrush: 8.5Amp/0.2ms@24V
Environmental
Operating Temperature: -20
-40
o
C to 70oC (Standard)
o
C to 85oC (Extended)
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF: >2Million Hours
Fiber Transceiver Characteristics
Fiber Length 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max -32dBm -29dBm -34dBm -34dBm
Wavelength 1310nm 1310nm 1310nm 1550nm
Serial Confi guration Port
Com Parameters: 9600,n,8,1
Recommended Wiring Clearance
Front: 4" (10.16 cm)
Side: 1" (2.54 cm)
Regulatory Approvals
FCC/CE (CFR 47, Part 15, Subpart B, Class A)
EMC Dir 89/336/EEC, EN 50204, EN 5501 1
EN61000-4-2/3/4/5/6/8/1 1, EN61000-6-2/4
ANSI C63.4, ICES-003
UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A
UL 508 and UL 1604
CAN/CSA-C22.2 No.213, ATEX II 3 G Ex nA
ABS T ype Approval for Shipboard Applications
GOST-R Certifi ed, RoHS Compliant
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/TS2 for Traffi c Control
* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX
Multimode: 50-62.5/125μm
Singlemode: 7-10/125μm
Connectors
10/100BaseTX: Six (6) RJ-45 Copper Ports
100BaseFX: Two (2) SC or ST Duplex Ports
® 2009
N-TRON
, Corp.
may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application
N-TRON
of
shall not be liable for any damage resulting from the installation, use, or misuse of this product.
products rests with the end user.
, N-TRON
and the
N-TRON
N-TRON
logo are trademarks of
makes no warranties as to the fi tness or suitability of any
N-TRON
Contact Information
N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL36609USA 6330 Cham / Zg Switzerland
TEL: (251) 342-2164 TEL: +41 41 7406636
FAX: (251) 342-6353 FAX: +41 41 7406637
Website: www.n-tron.com
Email: N-TRON_info@n-tron.com
, Corp. Product names mentioned herein are for identifi cation purposes only and
N-TRON
Printed in USA.
product for any specifi c application.
REV 090804
N-TRON
Corporation
Loading...