B&B Electronics 105FXE-SC(ST)-15-POE Datasheet

®

THE INDUSTRIAL NETWORK COMPANY

The

N-TRON

Switch is designed to transmit power along with data over
an Ethernet network. It is ideal for PoE capable devices
where running an AC power feed is either not possible or cost
effective. This allows an end user to power a PoE camera,
wireless access point, or any other PoE capable device without
the need for running separate wires for power. This also
makes it possible to utilize a centralized battery backup for
all these devices.

105FX-POE

Unmanaged Industrial Ethernet

PRODUCT FEATURES

• Compact, Space Saving Package

• Full IEEE 802.3 and 802.3af Compliance

• American Bureau of Shipping (ABS) Type Approval

• EN50155 for Railway applications

• Four 10/100BaseTX RJ-45 Ports (4 PoE Ports)

• One 100BaseFX Port with ST or SC Connectors

• Unmanaged Operation

• Extended Environmental Specifi cations

•-40ºC to 85º Operating Temperature

• Automatic Detection of Connected PoE Devices

• Support for Full/Half Duplex Operation

• Auto-sensing Duplex, Speed, and MDIX (RJ-45)

• Up to 1.0 Gb/s Maximum Throughput

• Full Wire Speed Communications

• Supports 15.4 Watts per port
(13 Watts at the PD)

• Redundant Power Inputs (46-49 VDC)

• Power Fault Status LED's

• LED Link/Activity Status Indication

• LED PoE Status Indication

• Hardened Metal DIN-Rail Enclosure

PRODUCT OVERVIEW

The

105FX-POE

to meet the most demanding industrial communications
requirements by providing high throughput and minimum
downtime while also providing power to PoE capable devices
over the Ethernet network.

The

105FX-POE

ports. All ports are full/half duplex capable, using "state of
the art" Ethernet switching technology . All four RJ-45 ports
also act as PoE ports allowing power to pass through four of
the eight strands of CAT5 cable. Each PoE port supports up
to 15.4 watts of power. The 5th port is a 100BaseFX fi ber
optic uplink utilizing industry standard ST or SC duplex
connectors.

Industrial Network Switch is designed

provides four RJ-45 auto sensing10/100BaseTX

The

105FX-POE

capabilities of the four TX port connections, and confi gures
itself automatically.

The

N-TRON

addresses, enabling these products to support extremely
sophisticated and complex network architectures.

The

105FX-POE

that is connected and powers it accordingly . If a PoE fault is
detected on a specific port the Auto-disconnect feature
disables PoE power on that port, allowing only data
communications to pass, reducing the risk of damaging costly
equipment.

105FX-POE

The
and power to wireless LAN access points, network cameras,
VoIP, and other PoE capable devices. The product also helps
reduce costs by eliminating the need for electrical wiring and

electrician expenses.

105FX-POE

The
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience the network
switch can be DIN-Rail mounted alongside Ethernet I/O or
other Industrial Equipment.

To increase reliability the
redundant power inputs. Two power LED's are also
provided on this unit indicating a valid power source on both
the redundant power inputs and also indicating when a power
fault bus occurs.

auto-negotiates the speed and fl ow control

105FX-POE

automatically detects any PoE device

is an ideal candidate for providing data

has extended operating environmental

also supports up to 2,000 MAC

105FX-POE

provides dual

THE INDUSTRIAL NETWORK COMPANY

105FX-POE SPECIFICATIONS

Case Dimensions

Height: 3.5" (9.7cm)
Width: 1.5" (3.8 cm)
Depth 3.6" (9.0cm)
Weight: 0.7 lbs. (0.3 kg)
DIN-Rail: 35mm

Electrical

Input Voltage: 46-49 VDC
Steady Input Current 1.6 A@48V

Under Full Load
Steady Input Current with 65mA@48V

No PoE, Switch Full Load
Inrush: 26Amp/1.3ms@48V

Environmental

Operating Temperature: -40oC to 85oC
Storage Temperature: -40oC to 85oC
Operating Humidity: 10% to 95%

(Non Condensing)
Operating Altitude: 0 to 10,000 ft.

Network Media

10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX Multimode 50-62.5/125μm
100BaseFX Singlemode: 7-10/125μm

100 Mb Fiber Transceiver Characteristics

Fiber Length
TX Power Min
RX Sensitivity Max
Wavelength

2km* 15km** 40km** 80km**

-19dBm -15dBm -5dBm -5dBm

-32dBm -29dBm -34dBm -34dBm
1310nm 1310nm 1310nm 1550nm

* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable

Connectors

10/100BaseTX+PoE: Four (4) RJ-45
TX/PoE Copper Ports

100BaseFX: One (1) ST or SC
Duplex Port

Recommended Wiring Clearance

Front: 4" (10.16 cm)
Top: 1" (2.54 cm)

Ordering Information

105FX-XX-POE Four10/100BaseTX Ports (4 PoE)

One 100BaseFX Multimode Port

105FXE-XX-YY-POE Four10/100BaseTX Ports (4 PoE)

One 100BaseFX Singlemode Port

NTPS-48-5 DIN-Rail Power Supply

48V@ 5 Amp

BENEFITS

PoE Industrial Network Switch

• Compact Size / Small Footprint

• Ability to Power Devices via LAN

• Eliminates need for Costly Electrical Wiring

• Extended Environmental Specifi cations

• Hardened Metal DIN-Rail Enclosure

• High Performance

• High MTBF >2M Hours

• ESD Protection Diodes on RJ-45 Ports

• Surge Protection Diodes on Power Inputs

Ease of Use

• Plug & Play Operation

• Auto Sensing 10/100BaseTX

• Auto Sensing Full/Half Duplex

• MDIX Auto Cable Sensing

• Unmanaged Operation

• Auto-Detection of PoE Capable Devices

• Redundant Power Status LED's

Increased Performance

• Full Wire Speed Capable

• Full Duplex Capable

• Eliminates Network Collisions

• Increases Network Determinism

• Auto-Disconnect of PoE Port if Fault is Detected

Regulatory Approvals

FCC Title 47 Part 15 Class A
ICES-003- Class A
CE: EN61000-6-2,4; EN61000-4-2,3,4,5,6
EN55011

UL Listed (US and Canada) per ANSI/ISA-12.12.01-2000,
Class I, Div 2, Groups A,B,C,D,T4A;

ABS Type Approval for Shipboard Applications
DNV Type Approval Certifi cation
EN50155 for Railway Applications

GOST-R Certifi ed; RoHS Compliant

Designed to comply with:

IEEE 1613 for Electric Utility Substations
and NEMA TS1/TS2 for Traffi c Control Equipment

Contact Information

N-TRON Corp. N-TRON Europe GmbH
820 S. University Blvd., Suite 4E Alte Steinhauserstr 19
Mobile, AL 36609 USA 6330 Cham / Zg Switzerland
TEL: [phone] TEL: [phone]
FAX: [phone] FAX: [phone]
Website: www.n-tron.com
Email: [e-mail]

REV 090805

® 2009

N-TRON

, Corp.

N-TRON

and the

N-TRON

may be trademarks and/or registered trademarks of their respective company. Specifi cations subject to change without notice. The responsibility for the use and application

N-TRON

of
shall not be liable for any damage resulting from the installation, use, or misuse of this product.

products rests with the end user.

N-TRON

logo are trademarks of

makes no warranties as to the fi tness or suitability of any

N-TRON

, Corp. Product names mentioned herein are for identifi cation purposes only and

N-TRON

Printed in USA.

product for any specifi c application.

N-TRON

Corporation