B&B UHR207, UHR307 Quick Start Manual

ABOUT USB

Video: Making USB Reliable in Rugged Applications

www.bb- elec.com/tech_articles/video_usb-tech-tips.asp

Video: USB Hub Introduction

www.bb-elec.com/tech_articles/video_UHR304.asp

Connect Your Power Supply

Mounting

Product Overview

To USB Host

Front View

LED

Indicators

Downstream Ports

Side View

Detachable

Terminal Block

Barrel Plug Power

DIN Rail Mounting

Attach the DIN rail
bracket with the flat
surface of the bracket
facing the back
of the hub.

Panel Mounting

The panel mount brackets can be attached
to either side of the hub. They can be attached
in (4) positions: Up, Down, Forward and Back.

External Power

Both the UHR207 and the UHR307 require 10 to 30
VDC external power. They will consume a maximum
of 30 W. You can provide power via the barrel plug port
or the terminal block.

Terminal block is polarity protected.

You can order a grounding strap at:

http://www.bb-elec.com/product.asp?sku=CU15B

We strongly recommend that you ground the
chassis. Connect a grounding wire from the green
ground lug to a good source of earth ground.

Grounding

LED Status

Power ON = Power connected
Port ON = Port active, ready for use
Port OFF = Port fault

POS NEG GND

1 2

3

4

Troubleshooting

Both the UHR207 and the UHR307 require 10 to 30
VDC external power. They will consume a maximum of
30 W. You can provide power via the barrel plug port
or the terminal block.

You will need no drivers to install a USB hub.
Your operating system will discover and install it
automatically as soon as the hub is powered up and
connected to your computer. If you wish to confirm that
the installation was successful, go to Device Manager
and make sure that your new hub is listed there.

USB 2.0 is backwards-compatible with USB 1.0 and
USB 1.1. You can use legacy devices with your new
USB 2.0 hub. Note, however, that USB 1.0 and USB

1.1. devices will continue to operate at their original,
slower speeds.

UHR207 vs UHR307

Both the UHR207 and the UHR307 are ruggedized for
tough industrial applications. The UHR307 adds 4 kV
isolation.

Certifications

• FCC Class B

• CE

• EN 55022: 2006 + A1:2007 Class B Emissions

• EN 61000-6-2: 2006 Generic Standards

for Industrial environments

• EN 61000-4-2: 2008 (ESD)

• EN 61000-4-3: 2006 (RFI)

• EN 61000-4-4: 2004 (EFT)

• EN 61000-4-5: 2008 Electrical Surges

• EN 61000-4-6: 2005 Conducted Immunity

• EN 61000-4-8: 2009 Magnetic Field Immunity

• IEC 60601-1-2:2007 Medical electrical equipment,
Electromagnetic compatibility

Fast and easy on the web:

www.bb-elec.com

© 2012 B&B Electronics Manufa cturing Company

1-888-948-2248 | Europe: [phone]

www.bb-elec.com

Recommended Accessories
and Power Supplies

External Power Supply

7-Port Industrial USB Hub

USB Cable

Panel Mount Adapters

DIN Rail Adapter

Power Supply
(optional but not included)

First Things First...

Before you begin, be sure you have
the following:

707 Dayton Road | PO Box 1040 | Ottawa, IL 61350

Phone: [phone] | Fax: [phone]
www.bb-elec.com | E-mail: [e-mail]

Industrial 7-Port USB Hubs

UHR207 & UHR307

Non-Isolated Isolated

Document number – p/n 9242 r002 UHRx07 - 1112

http://www.bb-elec.com/UHRx07

Industrial Power Supply

PS5R-SC24

PS12V L B - I N T - M ED

http://www.bb-elec.com/UHRx07/
ACC

http://www.bb-elec.com/UHRx07/
ACC

Fast, Easy Answers

• First, check step 3.

• Then use your smart
phone to access complete

documentation on our
web site. Simply scan

the code to the right.