Bayonne TRDC-1418 User Manual

Project____________________Consultant_________________Model Number____________Item Number___________

Tray & Rack Dispensers

TRDC - Cantilever Style

Shown with silverware
holder & optional push
handle

Approved for NSF compliance by City Testing Labs, Inc.

SPECIFICATIONS

FRAME & BODY: The frame is constructed of welded heavy 16GA rust resistant stainless steel. The body is
constructed of type 304 stainless steel fully enclosed frame on all sides and top, with a stainless steel base.

DISPENSING MECHANISM: The dispensing height of racks/trays is maintained at a constant level by using a
spring mechanism which guides the rack platform in tracks by the use of a bearing mechanism.

BUMPERS: Dispenser is equipped with corner bumpers.

CASTERS: The dispenser is mounted on (4) 5” diameter cadmium plated, double bearing non-marking rubber

tired casters, (2) swivel, and (2) with brakes.

SILVERWARE DISPENSER: If required, the dispenser is furnished with a silverware dispenser, mounted over
the frame housing at a slope for easy access to the contents. Furnished with (8) holes for inserting round sil­verware cylinders.

CYLINDERS: Polypropylene and perforated to allow free ow of water, but does not allow atware to fall through.
Cylinders of same design and measurement are also available in stainless steel upon request.

Specications subject to change without notice.

50 Ranick Drive East
Amityville, NY 11701

www.bayonnestainless.com

631-842-3154

Fax: [phone]

TRDC-10 0308