Bay Linear LM7812T, LM7812S, LM7824T, LM7824S, LM7824D Datasheet
...
Bay Linear, Inc
2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
1.5A Positive Voltage Regulator
LM78XX
Packaging Information
Ordering Information
Device Operating
Voltage
Temp.
LM7805 7 to 20
0 to 125 °C
LM7806 8 to 20
0 to 125 °C
LM7808 10.5 to 23
0 to 125 °C
LM7809 11.5 to 24
0 to 125 °C
LM7810 12.5 to 25
0 to 125 °C
LM7812 14.5 to 27
0 to 125 °C
LM7815 17.5 to 30
0 to 125 °C
LM7818 20.5 to 33
0 to 125 °C
LM7824 26.5 to 39
0 to 125 °C
Description
The Bay Linear LM78XX is integrated linear positive
regulator with three terminals. The LM78XX offer several
fixed output voltages making them useful in wide range of
applications. When used as a zener diode/resistor combination
replacement, the LM78XX usually results in an effective
output impedance improvement of two orders of magnitude,
lower quiescent current.
The LM78XX is available in the TO-252, TO-220 & TO-263
packages,
Features
• Output Current of 1.5A
• Output Voltage Tolerance of 5%
• Internal thermal overload protection
• Internal Short-Circuit Limited
• No External Component
• Output Voltage 5.0V, 6V, 8V, 9V, 10V,
12V, 15V, 18V, 24V
• Offer in plastic TO-252, TO-220 & TO-263
• Direct Replacement for LM78XX
Applications
• Post regulator for switching DC/DC
converter
• Bias supply for analog circuits
Bay Linear
Inspire the Linear Power
TO-220 (T)
TO-263 (S)
TO-252 (D)
Top View
TO-263-3 (
1
Bay Linear
2
3
Top View
TO-263-3 (S)
1
Bay Linear
2
3
Top View
TO-263-3 (
1
Bay Linear
2
3
Top View
TO-263-3 (S)
1
Bay Linear
2
3
1. Input
2. GND
3. Output
Bay Linear, Inc
2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
LM78XX
Absolute Maximum Rating
Parameter LM78-- Unit
Input Voltage LM7824, LM7827
All Others
40
35
V
Operating Free-Air, Case, Virtual Junction Temp. 0 to 150
Storage Temperature Range -65 to 150
Lead temperature 1.6 mm from case for sec. 260
°C
Electrical Characteristics (LM7805)
(VI=10V, IO=500mA, 0°C ≤TJ≤125 °C, unless otherwise specified. (Note 1)
Parameter Symbol Conditions MIN TYP MAX UNIT
Output Voltage V
O
TJ = 25 °C
4.8 5.0 5.2 V
VI = 7V to 25V TJ = 25 °C
3 100 Line Regulation
∆V
O
VI = 8V to 12V TJ = 25 °C
1 50
mV
IO = 5mA to 1.5A, 25 °C
15 100 Load Regulation
∆V
O
IO = 250mA to 750mA, 25 °C
5 50
mV
Ripple Rejection RR VI = 8V to 18V, f=120Hz 62 78 dB
Output Noise Voltage V
N
F= 10Hz to 100Hz TJ = 25 °C
40
µV
Dropout Voltage V
D
TJ = 25 °C
2.0 V
Quiescent Current
TJ = 25 °C
4.2 8 mA
VI = 7V to 25V, TJ = 25 °C
1.3 Quiescent Current
Change
∆I
Q
IO = 5mA to 1A, TJ = 25 °C
0.5
mA
Electrical Characteristics (LM7806)
(VI=11V, IO=500mA, 0°C ≤TJ≤125 °C, unless otherwise specified. (Note 1)
Parameter Symbol Conditions MIN TYP MAX UNIT
Output Voltage V
O
TJ = 25 °C
5.75 6.0 6.25 V
VI = 8V to 25V TJ = 25 °C
5 120 Line Regulation
∆V
O
VI = 9V to 25V TJ = 25 °C
1.5 60
mV
IO = 5mA to 1.5A, 25 °C
14 120 Load Regulation
∆V
O
IO = 250mA to 750mA, 25 °C
4 60
mV
Ripple Rejection RR VI = 9V to 19V, f=120Hz 59 75 dB
Output Noise Voltage V
N
F= 10Hz to 100Hz TJ = 25 °C
45
µV
Dropout Voltage V
D
TJ = 25 °C
2.0 V
Quiescent Current
T
J
= 25 °C
4.3 8.0 mA
VI = 8V to 25V, TJ = 25 °C
1.3 Quiescent Current
Change
∆I
Q
IO = 5mA to 1A, TJ = 25 °C
0.5
mA
Loading...