BAYLI B38C45M, B38C44M, B38C43M, B38C42M Datasheet

Bay Linear
Inspire the Linear Power
BiCMOS Current Mode PWM Controller
Description
The Bay Linear B38C42/43/44/45 are fixed frequency and high performance current-mode PWM controller in BiCMOS. They are pin compatible with all bipolar 384X’s controllers are similar to the MIC38C4X family. These devices are designed for DC-to-DC converter applications and feature a trimmed oscillator discharge current and bandgap reference.
The benefit of the BiCMOS process provides significant performance improvement compared to Bipolar 384X devices. At 15V
0.17 mA with an operating current reduced to 4mA (typ.) from 14mA. Also, quicker output rise and fall times drive larger MOSFET ‘s and rail-to-rail output capability improves efficiency, especially lower supply voltages.
Major differences between members of these series are the UVLO thresholds. Typical UVLO thresholds of 14.5V (on) and 9V (off) for the B38C42 and B38C44 devices make them ideally suited to off-line applications. The corresponding typical thresholds for the B38C43 and B3845 devcies are 8.4V (on) and 7.6V (off).
The B39C4X devices are available in 8 pin DIP and SOIC.
Pin Connection
the start-up current is reduced to 50µA (typ.) from
IN
8-SOIC and 8-PDip
COMP
COMP
FB
ISENSE
ISENSE
RT/CT
RT/CT
1
1
2
2
3
3
4
4
8
8
7
7
6
6
5
5
REF
REF
VDD
OUTPUT
OUTPUT
GND
GND
Top
B38C42/43/44/45
Advance Information
Features
Low-Power BiCMOS Process
Ultra Low Start-Up Current of 50µA (typ.)
Very Lower Operating Current (4mA)
Current Mode Operation 500KHz
CMOS outputs with Rail to Rail outputs
Under Voltage Lockout with Hysteresis
5V Trimmed Bandgap Reference
Trimmed Oscillator Discharged Current
Low Cross-Conduction Currents
Available in 8 pin SOIC and 8PDip
Similar to MIC38C42/43/44/45
Pin to Pin compatible with UC3842X Family
Applications
Switched and Current Mode Power Supplies
Off-line Power Supply
Step-Up (Buck), Step-Down (Boost) Regulator
Flyback, Isolated Regulators
Synchronous FET converters
Forward Converters
Devices Package Temp.
B38C42M SO-8 B38C42P 8-DIP B38C43M SO-8 B38C43P 8-DIP B38C44M SO-8 B38C44P 8-DIP B38C45M SO-8 B38C45P 8-DIP
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
Bay Linear, Inc
2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
B38C4X
Absolute Maximum Rating
Parameter Symbol Value Unit
Supply Voltage V Switch Supply Voltage V Output Current I
DD
D
OUT
Zener Current VDD 30 mA Current Sense Voltage V Feedback Voltage V Power Dissipation P
ISENSE
FB
D
Storage Temperature Range T -65 to 150 Lead Temperature (Soldering 10 Sec.) T
L
20 V 20 V
1A A
-0.3 to 5.5 V
-0.3 to 5.5 V 1 W
°C
300
°C
Electrical Characteristics
VDD = 15V (Note 4), RT = 11k, CT = 3.3nF, TA= -40°C to +85°C, unless otherwise specified
Parameter Symbol Conditions MIN TYP MAX UNIT
REFERENCE SECTION
Reference Voltage V
Line Regulation REG
Load Regulation REG
Short Circuit Output Current I
REF
(LINE)
(LOAD)
SC
OSCILLATOR SECTION
Oscillator Frequency f Frequency Change with Voltage Oscillator Amplitude V
f/V
OSC
ERROR AMPLIFIER SECTION
Input Bias Current I Input Voltage V Open Loop Voltage Gain G
BIAS
I(E>A)
VO
Power Supply Rejection Ratio PSRR Output Sink Current I Output Source Current I High Output Voltage V Low Output Voltage V
SINK
SOURCE
OH
OL
OUTPUT SECTION
Low Output Voltage V
High Output Voltage V
Rise Time t Fall Time t
OL
OH
R
F
TJ = 25 °C. I
12VVDD≤18V, IO = 5µA
1mA≤I
REF
= 1mA
REF
20mA
T= 25 °C
T= 25 °C 12VVCC≤25V
CC
- 1.6 2.3 V
-1 -0.1 1 V1 =2.5V 2.42 2.50 2.58 V 2VVO≤4V
CC
25V
12VV V2 =2.7V, V1 =1.1V 2 6 - mA V2=2.3, V1=5V -0.5 -1.0 - mA V2=2.3, RL= 15 to GND V2=2.7, RL= 15 to pin 8
I
= 20mA
SINK
I
= 200mA
SINK
S
= 20mA
ource
S
= 200mA
ource
TJ = 25 °C, CL=1nF (note3) TJ = 25 °C, CL=1nF (note3)
4.90 5.00 5.10 V
- 2 20 mV
- 1 25
-30 -80 -180 mA
47 52 57 KHz
- 0.05 1 %
P-P
µA
65 90 - dB 60 70 - dB
5 6 - V
- 0.8 1.1 V
-
13 12
0.08
1.4
13.5
13.0
0.4
2.2
-
-
V
V
- 40 70 ns
- 30 50 ns
Note: Output Switch tests are performed under pulsed conditions to minimize power dissipation
Bay Linear, Inc
2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
Loading...
+ 3 hidden pages