Outdoor Wicker Conversation Set
PART LIST
A B
Left Arm
F
(loveseat)
Seat Panel
K
Panel
3 PCS
G
1 PC
L
Right Arm Panel
3 PCS
Panel
Top
1 PC
C
(arm chair)
Back Panel
2 PCS
H
4 PCS
Leg
D
(arm chair)
Seat Panel
I
2 PCS
Shelf
1 PC
E
(loveseat)
Back Panel
1 PC
J
Glass Top
1 PC
Seat Cushion
4 PCS
Back Cushion
4 PCS
HARDWARE LIST
#1
M6*15mm
Short Bolt
8 PCS (Extra 1)
#2 #3 #4
M6*30mm
Medium Bolt
18 PCS (Extra 2)
M6*40mm
Long Bolt
20 PCS (Extra 2)
M6mm
Flat Washer
46 PCS (Extra 2)
#5
M6mm
Allen Wrench
1 PC
2
Step 1.
Lay left arm panel (part A) down on a soft flat surface, such as carpet, as shown below.
Attach back panel (part C) to left arm panel (part A) using long bolts (part #3), flat washers
(part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#5
#3
#4
#4
#3
#5
#3
#4
#5
Step 2.
Attach seat panel (part D) to left arm panel (part A) and back panel (part C) using medium
bolts (part #2), long bolt (part #3), flat washers (part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#5
#4#3
#5
#2
#4
#5
x2
x2
x1
#2
#4
#2
#3
#4
#5
3
x3
x1
x4
x1
Attach right arm panel (part B) to assembled unit (parts A, C & D) using medium bolts (part #2)
Step 3.
long bolts (part #3), flat washers (part #4) and allen wrench (part #5).
NOTE: Please fully tighten all bolts at this time.
#5
#3
#4
#4
#2
#5
#4
#2
#5
Step 4. Carefully turn unit upright. Place seat cushion (part K) and back cushion (part L) as shown below.
#3
#5
#4
#2
#3
#4
#5
x3
x2
x5
x1
Repeat steps 1-4 to assemble remaining chair.
K
L
4
Step 5.
Attach back panel (part E) to left arm panel (part A) using long bolts (part #3), flat washers
(part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Lay left arm panel (part A) down on a soft flat surface, such as carpet, as shown below.
#5
#3
#4
E
#4
#3
#5
#3
#4
#5
Step 6.
bolts (part #2), long bolts (part #3), flat washers (part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Attach seat panel (part F) to left arm panel (part A) and back panel (part E) using medium
#5
#4#3
#5
#2
#4
x2
x2
x1
#5
#2
#4
E
F
#2
#3
#4
#5
5
x3
x2
x5
x1
Attach right arm panel (part B) to assembled unit (parts A, E & F) using medium bolts (part #2)
Step 7.
long bolts (part #3), flat washers (part #4) and allen wrench (part #5).
NOTE: Please fully tighten all bolts at this time.
#5
#3
Step 8.
#4
#4
#3
#5
E
F
#4
#2
#4
#2
#5
Carefully turn unit upright. Place seat cushions (part K) and back cushions (part L)
as shown below.
#5
#2
#3
#4
#5
x3
x2
x5
x1
K
L
6
Step 9.
Attach legs (part H) to top panel (part G) using short bolts (part #1), flat washers
(part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Lay top panel (part G) down on a soft flat surface, such as carpet, as shown below.
#5
#5
#1
#4
Step 10.
allen wrench (part #5).
NOTE: Please fully tighten all bolts at this time.
Attach shelf (part I) to legs (part H) using long bolts (part #3), flat washers (part #4) and
H
G
#1
#4
#5
#1
#4
x8
x8
x1
I
#4
#5
#3
H
#3
G
7
#4
#5
x4
x4
x1
Step 11.
Turn the table upright and gently place glass top (part J) on holders of top panel (part G).
J
G
I
H
8
Loading...