
Blackwashed Water Hyacinth
Storage Trunk
Assembly Instructions

Blackwashed Water Hyacinth Storage Trunk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A
top frame
D
left frame
1
allen screw
4
1pc
1pc
8pcs
4pcs
B
front frame
E
right frame
2
allen key
5
1pc
1pc
1pc
2pcs
C
back frame
F
bottom panel
3
round screw
1pc
1pc
16pcs
bolt
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Assembly Tool Required
No.2 Phillips Screwdriver
safety hinge

Blackwashed Water Hyacinth Storage Trunk
Assembly Instructions
Attach front frame (B) and
back frame (C) to left frame
(D) and right frame (E) with
8pcs allen screws (1).
Using allen key (2), partially
tighten all allen screws (1) as
shown.
:
Attach bottom panel (F) inside
the trunk.
Fully tighten all allen screws
(1).
Using screwdriver, tighten
8pcs round screws (3) as
shown.
:

:
Attach top frame (A) to back
frame (C) by attaching the preinstalled hinges on the top
frame to the hinges on the
back frame using 4pcs bolt (4)
as shown.
Attach 2pcs safety hinges (5)
to pre-drilled holes on left
frame (D), right frame (E), and
top frame (1) using
screwdriver. Tighten 8pcs
round screws (3) for the safety
hinges as shown.
ASSEMBLY IS COMPLETE
:

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form