Page 1
1. PARTS LIST
ASSEMBLY INSTRUCTIONS
UPPER CHAIR - 1 PC
a.
2. HARDWARE LIST
aa. M6 BOLTS
- 4 PCS
bb. SPRING WASHER
- 4 PCS
3. ASSEMBLY STEPS
3A. Align the FRONT &
BACK positions of Swivel
Rocker Hardware (b) &
bottom of Upper Chair (a).
3B. Through the 4” hole underneath
the Swivel Rocker Base (b), align the first
hole (A) of Swivel Rocker Hardware to
the hole (A) of bottom Upper Chair (a),
and use (dd) Screw Driver (not provided)
to tighten hardware (aa) M6 Bolt, (bb)
Spring Washer, (cc) Flat Washer.
SWIVEL ROCKER BASE- 1 PCb.
FRONT
POSITION
(THICKER SIZE)
BACK
POSITION
B
BACK
C
A
FRONT
D
cc. FLAT WASHER
- 4 PCS
CUSHION - 1 PCc.
dd. SCREW DRIVER
- NOT PROVIDED
3D. After Assembly, stand the Rattan Swivel
Rocker Chair right up, and put the Cushion (c)
on, and then tighten all the Velcros on the
back of the Cushion to the Rattan Swivel
Frame.
dd
aa
A
A
bb
cc
3C. Rotate the Swivel Rocker Base
BACK
A
B
D
C
FRONT
(b), to align the next matching holes
(B, C & D) of Swivel Rocker Hardware
and bottom Upper Chair (a) and tighten
all the (aa) M6 Bolts, (bb) Spring
Washers and (cc) Flat Washers.
A
A
FINISH
Loading...