Page 1
CARE AND MAINTENANCE
See care label
NOTICE
* Please make sure that you have all parts indicated before you
begin assembly of this item
* This item should be assembled on a soft surface to prevent
scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
THE DESIGN OF THE CHAIR IN THE DRAWINGS
MAY VARY FROM YOUR ACTUAL CHAIR, BUT
ASSEMBLY IS THE SAME ON ALL MODELS.
NO.
1
2
H1
H2
DESCRIPTION
Seat
Legs
Allen Bolt
Allen Key
12 mm
4 mm
PICTURE
25.4 mm
6 mm
QTY
1
1
Weight Capacity : 275 lbs
4
WARNING : DO NOT STAND ON CHAIR
WARNING : DO NOT OVER TORQUE BOLTS/SCREWS
1
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
PREPARATION
Before beginning assembly of product, make sure all parts are presents. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attampt to assemble the product.
Estimated Assembly Time : 5 minutes.
Tools Required for Assembly (Included): Allen Key
Step 1 : Put the seat on top of its base. Follow the arrow head
and signs to place it correctly. Align its holes so bolts can be
placed properly.
Step 2 : Insert bolts in each hole. Tighten them using allen key
(provided). Do not over torgue bolts.
Step 3 : Your chair is ready. Seat back and relax.
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
Loading...