Page 1
Caution : You must read this before you proceed
CHAIR
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Chair and to prevent damage to the Chair, 02 persons may be
needed to execute this action.
Page 2
Label Picture Description QTY
A Backrest Panel 1
B Seat Panel 1
C
Right Leg Panel
(with Leveler)
1
D
Left Leg Panel
(with Leveler)
1
E Leg Support Bar 1
Label Picture Description QTY
①
Short Bolt
(M8x30mm)
3
②
Long Bolt
(M8x50mm)
7
③
Screw
(M6x50mm)
3
④
Flat Washer
(M8.5/16x2mm)
3
⑤
Allen Key 1
Page 3
Overview
This Chair has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Before Beginning Assembly:
Seat Panel (A)
FRONT FACING
Right Leg
Panel (C)
Backrest Panel (A)
Left Leg
Panel (D)
Leg Support
Bar (E)
Page 4
Step 1
Step 2
Lay down Backrest Panel (A) then attach Seat Panel (B) to Backrest Panel (A)
by using Bolt (①), Flat Washer (④) and secure by Allen Key (⑤)
Do not fully tighten the Bolts.
Unpack and place all parts on a clean, non-marring surface.
Page 5
Step 3
Position housing of Left Leg Panel (D) into pre-fixed iron dowel on Seat Panel
(B) as picture
3.1) Secure Left Leg Panel (D) to Seat Frame (B) by using Bolts(②) with Allen
Key(⑤)
3.2) Secure Left Leg Panel (D) to Backrest Panel (A) by using Bolts(②) with
Allen Key(⑤)
Do not fully tighten the Bolts.
Pre-fixed Iron Dowel
ADB
Step 3.2
Step 3.1
Page 6
Step 4
With assistance from your adult partners, turn pre-assemble part in step 3 to
the other side
Place Leg Support Bar (E) into housing of Left Leg Panel (D)
Then, position housing of Right Leg Panel (C) into pre-fixed iron dowel on
Seat Panel (B) and Leg Support Bar (E) as picture
4.1) Secure Right Leg Panel (C) to Leg Support Bar (E) by using Screw (③)
with Allen Key(⑤)
4.2) Repeat same process in step 3.1 and 3.2 to Secure Right Leg Panel (C)
to Backrest (A) and Seat Panel (B)
Do not fully tighten the Bolts, Screws.
B
D
C
A
Step 4.2
Step 4.1
Page 7
Step 5
Step 6
Place the Chair right side up on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Chair to some 30cm to 50cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Chair freely and vertically with the four legs, hitting the ground, at the same time.
This Drop Test will help to ensure that all the Bolts, Screws and gaps all reach full
alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, proceed to tighten all the Screws, and Bolts.
CAUTION: When tightening the Screws, and Bolts tighten sequentially. DO NOT
tighten any Bolt, or Screw fully and then move towards the next one. This could
cause the frame to warp.
If there are still wobbles, loosen the Screws and Bolts and execute this same drop tests.
If the Chair is not stable, it could lead to damage to the product.
With assistance from your adult partners, turn the Chair back to normal flat ground
Secure Left Leg Panel (D) to Leg Support Bar (E) by using Screw (③) with Allen Key(⑤)
Do not fully tighten the Screw
D
E
If wobble
Test again
30CM~50CM
Page 8
Step 7
Your Chair is ready for use.
Please use adjustable foot for uneven floors.
This Chair can only be used on a flat, level surface.
Page 9
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
Keep away from sources of ignition.
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than
800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment
(OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list include
wood dust, brass, and other everyday substances, which can be found in very common household items, such
as: lamps, Chairware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the 800plus common chemicals and ingredients listed under this law could potentially be on our furniture or packing
materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’ve
shipped to our customers. Additionally, this warning label is very common and can be found on almost every
piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank, grocery
store, or restaurant without finding at least one warning.
Loading...