Caution : You must read this before you proceed
LOVESEAT
Picture
CAUTION : This Loveseat is NOT a TOY.
Keep your child / children at bay during the assembly process.
For turning the Loveseat and to prevent damage to the Loveseat, 02 persons may
be needed to execute this action.
1
Label Picture Description QTY
A Backrest Panel 1
B Seat Panel 1
C Left Front Leg 1
D Right Front Leg 1
E Left Back Leg 1
F Right Back Leg 1
Label Picture Description QTY
① Bolt (M6*30mm) 11
② Screw (M7*70mm) 3
③ Allen Key 2
2
Overview
Before
Beginning
Assembly:
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Loveseat parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Backrest Panel
(A)
Right Front Leg
(D)
Right Back Leg
(F)
Left Front Leg
(C)
Left Back Leg
(E)
Seat Panel
(B)
3
2.1) Attach Right Front Leg(D) to Right Back Leg(F) using Bolts(①) with Allen Key(③).
2.2) Repeat the same process with Left Front Leg(C) and Left Back Leg(E).
Do not fully tighten the Bolts.
Unpack and place all parts on a clean, non-marring surface.
Step 1
Step 2
2.1
2.2
D
C
E
F
1
3
4
Attach Backrest Panel(A) to Left Front Leg(C) and Right Front Leg(D) using Bolts(①) with Allen
Key(③).
Do not fully tighten the Bolts.
3.1) Attach Left Front Leg(C) to Seat Panel(B) using Bolt(①) with Allen Key(③).
3.2) Then, attach Left Back Leg(E) to Seat Panel(B) using Screw(②) with Allen Key(③) as
pictured above.
Repeat the same process to attach Rìght Front Leg(D) and Right Back Leg(F) to Seat Panel(B).
Do not full tighten the Bolts and Screws.
Step 3
Step 4
ACD
3
1
3.2
3.1
1
3
3
2
B
E
C
B
D
F
E
C
5
Step 5
Place the Loveseat onto a level surface, then EXERT pressure, floorwards, onto the Loveseat.
This pressure will help the Loveseat reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts and Screws until evenly secured.
Inspect the Loveseat and make sure all parts are adequately connected.
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
6
7
Loading...