Assembly Instruction
CAUTION:
Read instruction carefully and turn electicity off at main circuit breaker panel before
beginning installation.
Care and Cleaning
To clean the outside fo the fixture,use a dry or slightly dampened clean cloth(use clean
water,never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture,first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box.Next,use a dry or slightly damperned clean
cloth(use clean water,never a solvent) to wipe the
interior surface of the fixture
Do not use any cleaners with chemical,solvents or harsh abrasives.Use Only a dry soft cloth
to dust or wipe carefully.
Estimated Assembly Time: 30 minutes
Part List and Hardware List
PIECE DESCRIPTION PICTURE
A
A1
B
C
C1
D
Mounting bar
Mounting screw
Canopy
Lock
Lock
Out ring
QUANTITY
1X
2X
1X
1X
1X
1X
PIECE
F
G
G1
H
I
J
K
DESCRIPTION
Center tube
Wood
dropper
Metal
cover
Lampbody
Socket sleeve
Bulb
Wire Nut
PICTURE
QUANTITY
1X
3X
1X
1X
3X
3X
3X
E
Chain
1X
L
Spanner
1X
Installation
Step 1
Unpack all parts from cartons carefully
Screw the chain(E) to the lock( C ) of the center tube & canopy(F)
Thread one end of center tube(F)to the fixture(H) and screw by
spanner(L)
Thread metal cover(G) to another end of center tube(F) and tighten
with lo
Place socket sleeve(I) and bulb(J) to the socket
Hanging wood dropper(G) to the hook of metal cover
of the fixture(H)
Step 2 Wire Connetion
ck(C1)
（G1）
and hook
Connect,Hot,Black or Red outlet Supply Wire to:
Black
* Parallel Cord(round & smooth)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)
with copper metal conductor
*Note: When parallel wire(SPTI & SPT II) is used.The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left.)
Connect,Neutral,White Outlet Supply Wire to:
* Parallel Cord(square& ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green) with Silver metal conductor
Step 3
Installing the mounting bar(A) with mounting screw(A1) £ ¬and
secure canopy(B) with the lock(C) and tighten with out ring(D)
White
Step 4
Installing whole body to the lock(C)
Step 5
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
Loading...