Page 1
PIECE QUANTITY
A 1X
B 1X
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
DESCRIPTION
PICTURE
Seat
Back Rest
Product Dimensions : 18.1"W x 22.8"D x 39"H
B 1X
C 1X
D 1X
E1 6X
E2 6X
Weight Capacity: 300 lbs
E3 1X
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Back Rest
Front leg-1
Front leg-2
Bolt
8 X 60 mm
Flat Washer
The legs and hardware are located underneath the chair in the
zipper compartment.
1X
Spanner
F
Black Fabric
The legs and hardware are located underneath the chair in the
zipper compartment.
Page 2
STEP2
PUT THE WASHERS ON THE BOLT IN THE ORDER
STEP3
INSERT THE FRONT LEGS AND SCREW IN THE BOLTS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Spanner
STEP1
TAKE OUT LEGS AND HARDWARE WHICH PLACED
E1
E2
A
E1
D
C
E1
E2
E3
E2
E1
E
E3
STEP2
PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE
STEP3
INSERT THE FRONT LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY
The legs and hardware are located underneath the chair in the
STEP4
INSERT THE BACK LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY
STEP5
PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS
ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH SPANNER
WHILE THE CHAIR IS UPRIGHT AS PICTURED ABOVE
STEP6
FIX THE BLACK FABRIC ON THE UNDERSIDE OF THE
SEAT, THIS ITEM MAY REQUIRE PERIODIC TIGHTENING
STEP1
TAKE OUT LEGS AND HARDWARE WHICH PLACED
ON THE UNDERSIDE OF THE SEAT
A
B
F
E1
E2
E3
The legs and hardware are located underneath the chair in the
zipper compartment.
Loading...