Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5222 SWIVEL BAR STOOL
HARDWARE LIST
ITEM DESCRIPTION
QTY
1 JCBC BOLT M6 x 20mm
4pcs
2 JCBC BOLT M6 x 50mm
8pcs
3 WOOD SCREW M4 x 25mm
4pcs
4 WOOD SCREW M4 x 32mm
4pcs
5 M6 FLAT WASHER
4pcs
6 M6 SPRING WASHER
12pcs
7
M4 ALLEN KEY (BALL SHAPE) 1pc
8 WOOD DOWEL M8 x 35mm
4pcs
9
JCBB BOLT M8 x 50mm(BLACK) 4pcs
10
M8 HEX NUT (BLACK) 4pcs
11 M8 SPRING WASHER
4pcs
12 M8 FLAT WASHER
4pcs
13
SPANNER (13mm) 1pc
14
M5 ALLEN KEY (BALL SHAPE) 1pc
STEP 1
C
PART LIST
ITEM DESCRIPTION
QTY
A CHAIR FRAME
1pc
B
CHAIR LEG
2pcs
C
SIDE RAIL
2pcs
D
SWIVEL PLATE
1pc
E
SIDE STRETCHER
2pcs
F
SUPPORT WOOD
2pcs
8
x2
STEP 2
1 of 4
x2
Note : Loosely fit the bolts.
7
2
6
B
C
STEP 3
ASSEMBLY INSTRUCTIONS
STEP 4
2 of 4
STEP 3.1
STEP 3.2
Tighten all the bolts
at this stage.
STEP A
STEP B
x2
x4
x2
Note : Loosely fit the bolts.
7
2
6
2
7
Follow the label direction to fix the
support wood as picture shown.
F
E
B
STEP 5
ASSEMBLY INSTRUCTIONS
3 of 4
D
3
D
9
14
12
11
10
13
STEP A
STEP B
STEP 6
ASSEMBLY INSTRUCTIONS
STEP 7
4 of 4
A
B
5
6
7
1
WARNING
1. Do Not stand on this swivel bar stool.
Do Not use this swivel bar stool step ladder.
2. Use this product only for seating one person at one time.
3. Do Not use this bar stool unless all bolts,screws and knobs are filmy
secured.
4. Failure to follow these warning could result in serious injury.
Loading...