Baxi Potterton 24 Eco HE User Manual

© Baxi Heating UK Ltd 2011

Performa

24 Eco HE

Condensing

Combination Boiler

You can rely on

User Guide and
Important Warranty Information

Please keep these instructions in a safe place.

If you move house, please hand them over to

the next occupier.

Reset

Burner On

Flame Failure

Power On

2

1

3

4

0

bar

2

© Baxi Heating UK Ltd 2011

Natural Gas

Potterton Performa 24 Eco HE

G.C.No47 393 11

1.0 Quick Reference Guide 3

2.0 Troubleshooting 4

3.0 Repressurising the System 6

4.0 Fault Indication 7

5.0 Clearances & Cleaning 8

6.0 Legislation 9

7.0 Notes 10

8.0 Emergency 11

9.0 Warranty & Service 12

Section Page

Contents

Boiler Controls - see opposite page

for Operating Quick Reference Guide

Where fitted, user label for optional

timer to be applied here.

© Baxi Heating UK Ltd 2011 All rights reserved. No part of this publication may

be reproduced or transmitted in any form or by any means, or stored in any
retrieval system of any nature (including in any database), in each case whether
electronic, mechanical, recording or otherwise, without the prior written
permission of the copyright owner, except for permitted fair dealing under
Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other
use of any part of this publication should be made, giving details of the proposed
use, to the following address:

The Company Secretary, Baxi Heating UK Ltd,
Brooks House, Coventry Road, Warwick. CV34 4 LL

Full acknowledgement of author and source must be given.

WARNING: Any person who does any unauthorised act in relation to a
copyright work may be liable to criminal prosecution and civil claims for damages.

0086

ISO 9001

FM 00866

The Benchmark Scheme

Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme which aims
to improve the standards of installation and commissioning of domestic heating
and hot water systems in the UK and to encourage regular servicing to optimise
safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry
Council. For more information visit www.centralheating.co.uk

1.0 Quick Reference Guide

3

© Baxi Heating UK Ltd 2011

Reset

Burner On

Flame Failure

Power On

bar

0

1

2

3

4

ON/OFF/Reset
Selector Switch

Indicator Neons Central Heating

Temperature Control

Domestic Hot Water
Temperature Control

System Pressure Gauge

OFF Position

The boiler will not operate.

Central Heating Temperature Control

Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 35 - 85° C.

Domestic Hot Water Temperature Control

Turn the knob clockwise to increase or anticlockwise to decrease the temperature.
Range 35 - 65° C.

Power On Indicator - The indicator will illuminate when there is power to the boiler.

Flame Failure Indicator - The indicator will illuminate when the burner has not fired.

Burner On Indicator - The indicator will illuminate when the burner has fired and is heating

your central heating or domestic hot water.

Central Heating System Pressure - The normal operating water pressure is shown when the
needle is between 1 and 2.5 bar. If the pressure exceeds 3 bar the safety pressure valve will
operate and a fault is indicated. Contact your Installer.

Reset

Central Heating & Hot Water

Both Heating & Hot Water will operate.

Reset

Hold for approx 5 seconds and release.

Indicator Neons

Position of

Optional Timer

Reset

Domestic Hot Water

Hot Water will operate.

Reset

Burner On

Flame Failure

Power On

2

1

3

4

0

bar

2.0 Troubleshooting

4

© Baxi Heating UK Ltd 2011

START

Make sure the gas supply is
turned ON and check if other
gas appliances are operating
(e.g. fire, cooker).

If no gas, consult your
supplier.

Is the ON/OFF/Reset
Select Switch in the
( ) position and
the Power ON
Indicator lit ?

Is the ( ) and the ( )
indicator neon on ?

Burner On

Flame Failure

Power On

Check electricity to the
boiler is switched on.

Reset

Power On
Indicator

Burner On

Flame Failure

Power On

Burner On
Indicator

Boiler operating satisfactorily.

bar

0

1

2

3

4

Is the Central Heating System
Pressure needle in the GREEN
section, between 1 and 2.5 bar ?

If the reading falls below 1 bar
repressurise the system as
described in section 3.1.

Is the ( ) indicator neon on?

Boiler not working

NO

NO

YES

YES

YES

NO

Turn the ON/OFF/Reset
Selector Switch to Reset.

NO

YES

YES

NO

If boiler does not
Reset

Power On
Indicator

Burner On

Flame Failure

Power On

Flame Failure
Indicator