Baxi Belgravia Deluxe User Operating Instructions Manual

Please keep these instructions safe.

Should you move house, please hand

them over to the next occupier.

Baxi Cavendish Deluxe
Baxi Kingston Deluxe

Baxi Belgravia Deluxe

Live Fuel Effect Inset Gas Fires

User's Operating
Instructions

SAXI

HEATING

57132

Baxi Heating Ltd is one of the leading manufacturers
of domestic heating products in the UK.

Our first priority is to give a high quality service to our
customers. Quality is built into every Baxi product -
products which fulfil the demands and needs of

consumers, offering choice, efficiency and reliability.

To keep ahead of changing trends, we have made a
commitment to develop new ideas using the

latest technology - with the aim of continuing to

make the products that customers want to buy.

Baxi is also the largest manufacturing partnership in

the country. Everyone who works at the company has

a commitment to quality because, as shareholders,
we know that satisfied customers mean continued

We hope you get a satisfactory service from Baxi. If
not, please let us know.

CE

Saxi is a SS-EN ISO 9001
Accredited Company

57132

6.S.715

6.S. 6461: PIs 1&2

Most heating appliances generate warm air convection currents and

transfer heat to any wall surface against which they are situated.

Some soft furnishings (such as blown vinyl wallpapers) may not be

suitable for use where they are subject to temperatures above normal

room levels and the manufacturer's advice should be sought before

using this type of wall covering adjacent to any heating appliance.

The likelihood of wall staining from convected air currents will be

increased in environments where high levels of tobacco smoke or other

contaminants exist.

If the igniter fails at any time or there is a power cut, it is
possible to light the pilot with a match or taper.

Cavendlsh Models - Lift away the controls access door and
fender assembly away from the appliance. The pilot is visible
at the lower right hand side through the coals. Push the
control lever down as far as possible to the ignition position

(*),

apply a match to the pilot and once lit hold down for

twenty seconds.

Kingston&Belgravia Models - The pilot is visible through
the right hand part of the fender. It is necessary to apply a
suitable light through the fender. A wooden spill is
recommended for this purpose. DO NOT USE a wax taper or
paper as they may lead to blockage of the pilot assembly. Push
the control leverdown asfar as possible to the ignition position

(*),

apply the light to the pilot and once lit hold down for twenty

seconds.

57132

1.0 Warnings

1. The appliance is suitable for installation only in
G.B. and I.E. and should be installed in accordance
with the rules in force. For Ireland install in
accordance with I.S.813 "INSTALLATIONOFGAS
ApPUANCES".The installation must be carried out
by a CORGI Registered Installer or other
competent person and be in accordance with the
relevant requirements of GASSAFETY(Installation
and Use) REGULATIONS1994 (as amended), the
BUILDINGREGULATIONSissued by the Department of
the Environment, BUILDINGSTANDARDS(Scotland)

(Consolidation) REGULATIONSissued by the Scottish
Development Department and the LOCALBUILDING
REGULATIONS.Where no specific instructions are
given, reference should be made to the relevant
BRITISH STANDARD CODES OF PRACTICE
and INSTALLATION SPECIFICATIONS.

2. This appliance must be installed in accordance
with the manufacturers Instructions and the rules
In force and only used in a suitably ventilated
location.

3. Read the instructions before installing or using
this appliance.

4. The chimney should be swept before the
appliance is installed and checked annually to
ensure continued clearance of combustion
products and that there is no excessive build up of
soot.

5. Soot and debris from the chimney or other
sources should periodically require removal by a
competent person.

6. Any purpose provided ventilation should be
checked periodically to ensure that it is free from
obstruction.

7. Ensure that all protective plastic coating is
removed from trim and fender parts.

Important - Do not push excess electrical
cable into void behind the fender.

If a gas leak is found or suspected, turn off the gas
supply at the meter immediately and contact your

Installer or British Gas Emergency (under 'Gas' inthe
phone directory).

This appliance has a naked flame and a fireguard

conforming to B.S.6539 or 6778 should be used,
especially in instances where young children, the
elderly or infirm are likely to be present.

Never Hang Flammable Items Over

The Appliance

For reasons of safety and economy your appliance

should be serviced annually. Your Installer or British

Gas Service will be able to advise you.

57132

..........................................

;.

.

Kingston Deluxe
Belgravia Deluxe

Thermostatic Control of High Rate

The HIGH rate setting is thermostatically
controlled. The temperature at which the
thermostat operates can be altered by means

of the control knob situated behind the
controls access door. This is variable between

WARM and HOT. If the control knob is set on

HOT the fire will run on HIGH rate almost
continually. With the control knob on WARM
the HIGH rate will operate intermitently, the

fire dropping to MEDIUM rate when the
thermostat is satisfied. The control knob can

be set anywhere between these positions,
depending on size of room, other heating

sources, personal preferences etc.

2.0 Introduction

EIII Introduction

1. Your Baxi Cavendish Deluxe, Kingston Deluxe
or Belgravia Deluxe are live fuel effect inset gas
fires. The realistic coal effect is achieved by the
use of a multi-piece fuel bed and specially
designed gas burner rail.

~ Operating the Unit (Fig. 1)

1. The fire is controlled by a lever which is
positioned at the top right of the trim. The lever
has five positions:

Position

e

Position

* ;

IGNITION/PILOT

The High setting is thermostatically controlled.

2. To light the fire from the OFF position

(e)

push

the control lever down as far as possible to the

IGNITION/PILOT position

(*)

and the pilot should

light. If not, repeat the operation.

3. Once the pilot is alight continue to hold the
control lever down for twenty seconds.

4. Release the control lever. It will go to the
LOW/SUMMER rate position. To obtain MEDIUM
and HIGH gas rates, move the control lever
upwards to the appropriate position. Moving the
control lever to the uppermost position will
extinguish the fire.

5. The light effect is controlled by a master switch

behind the controls access door. With the master

switch in the ON position the light effect will

operate in the LOW/SUMMER position and
IGNITION/PILOT position.

6. To illuminat the light effect without the fire in
operation move the control lever from OFF to the

LOW/SUMMER position, with the master switch

ON.

NOTE: If the fire goes out at any time wait 2
minutes and repeat the ignition procedure.

7. To turn the fire off: Pull the control lever up as

far as possible to the OFF position

(e).

NOTE: When your Cavendish, Kingston or
Belgravia is first used it is possible some smells
may be emitted. These smells will quickly clear
with use.

EIII Cleaning the Fire

1. The fire may be cleaned with a damp cloth and

wiped with a soft duster. Do not use metal polish

on any parts of the appliance. It is not advisable to
use a vacuum cleaner attatchment to clean the top
of the coal bed as the material is fragile and easily
damaged.

e.

Shelf

1. A shelf may be fitted above the fire providing it

is minimum height from the hearth of 830mm

(3221/32in)and does not project more than 150mm
(529/32in).When the shelf depth is increased in
increments of 13mm ('/2in) over the 150mm
(529/32in)the height should be increased by 25mm
(1in) for every 13mm ('/2in).