baxi 124 Combi, 128 Combi User guide

Download

Page 1

User Guide

Condensing Combination Boiler

124 - 128

Combi

United Kingdom

Please keep these instructions in a safe place.

If you move house, please hand them over to the next occupier.

Page 2

be reproduced or transmitted in any form or by any means, or stored in any retrieval system of any nature (including in any database), in each case whether electronic, mechanical, recording or otherwise, without the prior written permission of the copyright owner, except for permitted fair dealing under Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other use of any part of this publication should be made, giving details of the proposed use, to the following address:

The Company Secretary, Baxi Heating UK Limited, Brooks House, Coventry Road, Warwick. CV34 4LL

Full acknowledgement of author and source must be given.

WARNING: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for damages.

1.0 Quick Reference Guide 3

2.0 Troubleshooting 4

3.0 Temperature Adjustment &

Care of the Boiler 6

4.0 Repressurising System & ‘Service Due’ 7

5.0 Clearances 8

6.0 Error Codes 9

7.0 Legislation 10

8.0 Warranty & Service 11

9.0 ErP Information 13

10.0 Emergency 17

11.0 Disposal 17

Section Page

Contents

Boiler Controls - see opposite page for

Operating Quick Reference Guide (Fascia Cover removed for clarity)

0086

ISO 9001

FM 00866

The Benchmark Scheme

Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.centralheating.co.uk

Model Range

Baxi 124 Combi

G.C.No 47-077-25

Baxi 128 Combi

G.C.No 47-077-26

This boiler can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge when they have been given supervision or instruction concerning the safe use of the device and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

Warning !

Page 3

1.0 Quick Reference Guide

Domestic Hot Water and Central Heating OFF (frost protection still enabled)

Indicates errors that prevent burner from starting

Error - Not resettable by user

Water pressure too low

Indicates a resettable error

Indicates navigation in programming mode (parameter)

Indicates navigation in programming mode

Generic error

Burner lit

DHW request

Heating mode

Units for temperature

Units for pressure

Service due (when activated)

Display Description

Central Heating

Temperature Adjustment

Boiler Information View Standby - Reset - Esc

Standby - Reset - Esc

Boiler Information View

Increase Central Heating Temperature Button *

Decrease Central Heating Temperature Button *

* Important Note: If your control system is fitted with the Optional Outdoor Sensor, these buttons will affect it’s operation. Please consult your installer for advice.

Increase Domestic Hot Water Temperature Button

Decrease Domestic Hot Water Temperature Button

Summer / Winter / Only Heating Mode Button

Key to Controls

Display showing all available segment

Summer - Winter - Only Heating

Mode

Domestic Hot Water

Temperature Adjustment

Summer - Domestic Hot Water only request mode

Winter - Domestic Hot Water & Central Heating request mode

Only Heating - Only Central Heating request mode

NOTE: When altering any settings it is necessary that the buttons are FIRMLY pressed for several seconds.

Page 4

2.0 Troubleshooting

Boiler not working

START

Make sure the gas supply is turned ON and check if other gas appliances are operating (e.g. fire, cooker).

If no gas, consult your supplier.

Is there electricity to the boiler ? Is the display lit ?

Check electrical supply to

boiler is switched on.

YES

Is the Burner Flame symbol showing ?

Burner Flame (Indicates burner is on)

Boiler operating

satisfactorily.

YES

Is the E and R symbol illuminated or flashing ?

YES

Press the Reset Button

Error Symbol

If it does not reset

CONTACT YOUR

INSTALLER OR

SERVICE

ENGINEER.

Reset Symbol

Is the Spanner symbol illuminated or flashing ?

YES

Spanner Symbol

Boiler Temperature

Central Heating

Error Code

Flame Failure

Reset Button

Page 5

2.0 Troubleshooting

Is the Timer ON and calling for heat ?

Is the Room Thermostat (if fitted) set high enough ?

Typical

examples of

external timer

Ensure timer is set for Central

Heating ON (see any

instructions supplied with timer)

YES

Turn Room Thermostat

to maximum setting

(typical example shown)

If you don’t know what you need to do

to get the boiler to light, or need help

with the system and controls, contact

your installer as soon as possible

bar

Is the Central Heating System Pressure between 1 and 2.5 bar ?

If the reading* falls below 1 bar repressurise the system as described in section 4.1.

Error Code 118 showing low pressure.

YES

*To display the water pressure press 6 times. ‘05’ will alternate with the system pressure. (NOTE: When the pump is running the gauge under the boiler may show a slightly different reading to the display)

CH ON

CH OFF

Page 6

3.0 Temperature Adjustment & Care of the Boiler

3.1 To increase or decrease the boiler temperature

1. Press to increase the Central Heating temperature.

2. Press to decrease the Central Heating temperature.

NOTE: An overheat thermostat (NTC) is positioned in the heat exchanger which shuts down the appliance if the boiler temperature exceeds 100°C. Press button to reestablish normal operating conditions.

3.2 To increase or decrease the domestic hot water

temperature

1. Press to increase the Domestic Hot Water temperature.

2. Press to decrease the Domestic Hot Water temperature.

3.3 Summer - Winter - Only Heating Mode

1. Press button until the required mode appears:-

2. See 3.1 or 3.2 to set the required temperature.

3.4 Cleaning the Outer Case

The painted panels should be wiped with a damp cloth and then dried completely. DO NOT USE ABRASIVE CLEANING

AGENTS.

3.5 Boiler Frost Protection

1. The boiler incorporates an integral frost protection feature that will operate in both Central Heating & Domestic Hot Water modes, and also when in standby ( displayed).

2. If the boiler temperature falls below 5° C, then the boiler will operate until the water temperature has been raised.

3. Further protection may be required for the system. Consult your installer for details.

3.6 Information Display

1. The table opposite shows information that can be displayed by pressing the button.

2. Press to return to the normal display.

Central Heating

Temperature Adjustment

Display Screen

Domestic Hot Water

Temperature Adjustment

Summer - Domestic Hot Water only request mode

Winter - Domestic Hot Water & Central Heating request mode

Only Heating - Only Central Heating request mode

Summer - Winter - Only Heating

Mode

The button can be pressed so that the display shows the following

information:-

1 press - ‘00’ alternates with Sub-Code (only when fault on boiler) or ‘000’

2 presses - ‘01’ alternates with CH Flow Temperature

3 presses - ‘02’ alternates with Outside Temperature (where Sensor fitted)

4 presses - ‘03’ alternates with DHW Temperature

5 presses - ‘04’ alternates with DHW Temperature

6 presses - ‘05’ alternates with System Water Pressure

7 presses - ‘06’ alternates with CH Return Temperature

8 presses - ‘07’ alternates with Flue Temperature

9 presses - ‘08’ alternates with Heat Exchanger Temperature

Page 7

bar

Normal Pressure

Requires

Repressurising

Pressure Gauge

Front and Side Panel

removed for clarity

View Under

Appliance

‘Service Due’

Message

When activated

‘Sd’ will show for

three seconds, alternating with the boiler temperature.

Fig. 1

Fig. 2

4.0

Repressurising System & ‘Service Due’

4.1 Central Heating System Pressure

1. The water pressure in the central heating system is indicated by the pressure gauge and also can be viewed on the display when there is power to the boiler.

2. To display the water pressure press 6 times. ‘05’ will alternate with the system pressure. (NOTE: When the pump is running the gauge under the boiler may show a slightly different reading to the display) .

3. With the system cold and the boiler not operating the pressure should be at least 0.5 bar. During operation the pressure should not exceed 2.5 bar, and will normally be between 1.0 and 1.5 (Fig. 1).

4. A pressure of 3 or greater indicates a fault (E117 displayed). The safety pressure relief valve will operate, at a pressure of 3 (Fig. 3). It is important that your Installer or Service Engineer is

contacted as soon as possible.

5. The minimum pressure for correct operation is 0.5. If the pressure falls below 0.5, this may indicate a leak on the central heating system (Fig. 2). Error Code E118 will be shown on the display.

4.2 To Re-Pressurise the System

(Using Temporary Filling Loop)

1. It may be necessary to repressurise the system occasionally (when the water pressure falls below 0.7 bar). A filling device (filling loop) will be fitted on the system. This may be on the boiler itself or on pipework near to the boiler. Seek advice from your installer.

2. If the water pressure requires regular re-pressurising a fault or leak is indicated (see section 4.1). Seek advice from your installer.

3. The filling loop will consist of two isolating taps and a separate temporary filling pipe with connection fittings.

4. Fit the temporary filling pipe, and tighten the two nuts on the pipe to the taps.

5. Fully open one of the taps first, and then while watching the pressure gauge, carefully open the second tap.

6. When the needle on the pressure gauge indicates between 1 and 2 bar, turn both taps off.

7. The temporary filling loop pipe must be disconnected and completely removed after the system is pressurised. (Ensure the two isolating taps are in the OFF position before disconnecting.) Keep the pipe in a safe place.

4.3 ‘Service Due’ Message (Fig. 3)

1. When activated the ‘Service Due’ message will be shown on the boiler display after 11 months operation.

2. Please contact your Installer, Annual Service Provider or Baxi Customer Support on 0344 871 1545 to arrange your Annual Service.

Fig. 3

Page 8

5.0 Clearances

5.1 For your Safety

1. This appliance must have been installed in accordance with the manufacturer’s instructions and the regulations in force.

2. Any modification that may interfere with the normal operation of the appliance without express written permission from the manufacturer or his agent could invalidate the appliance warranty. In GB this could also infringe the Gas Safety (Installation and Use) Regulations.

3. Your boiler must not be operated without the casing correctly fitted.

4. Do not interfere with any sealed components on this boiler.

5. Take note of any warning labels on your boiler.

6. Your boiler should have the following minimum clearances for Safety and Maintenance (Figs. 4 & 5):-

Top - 175mm Bottom - 170mm* Left side - 5mm Right Side - 5mm Front - 5mm (In Operation)

- 450mm (For Servicing)

*This is MINIMUM recommended dimension. Greater clearance will aid installation and maintenance.

7. If your boiler is installed in a compartment, do not use it for storage purposes. Do not obstruct any purpose provided ventilation openings.

8. Flammable materials must not be stored in close proximity to your boiler.

9. Avoid skin contact when your boiler is in operation, as some surfaces may get hot e.g. pipework.

10. Ensure that the flue terminal, outside the house, does not become damaged or obstructed, particularly by foliage.

11. It is important that the condensate drain system is not blocked, modified or damaged in any way as this would affect the operation of your boiler. Your installer should have insulated any exposed pipework.

GB - Heating Industry definition meaning England, Scotland, Wales, Northern Ireland, Isle of Man and the Channel Isles

170mm* Min

700mm

390mm

5mm Min

5mm

450mm

For Servicing

Purposes

Fig. 4

Fig. 5

In Operation

At least

1.5°

300mm

(290mm with flap removed)

175mm Min

(300mm Min if using

80/125 flue system)

Page 9

6.0 Error Codes

6.1 List of Error Codes

1. The display shows two types of signals: and . In both cases the display shows symbol and the numeric value of the error (see the “error table” below).

2. The spanner cannot be reset by the user. Please contact your Installer, Annual Service Provider or Baxi Customer Support on 0344 871 1545.

3. Fault errors can be reset by pressing the button.

WARNING: If an error code (if different from the ones described below) appears on the display or a certain fault appears frequently, contact your Installer, Annual Service Provider or Baxi Customer Support on 0344 871 1545.

Gas Valve Connection Cable

Gas Valve Fault

Central Heating NTC Fault

Flue NTC Fault

Central Heating Return NTC Fault

Calibration Required

Pre-circulation Fault

Safety Thermostat Operated

Primary System Water Pressure Too High

Primary System Water Pressure Too Low

Circulation Fault (Primary)

Flame Failure

Flue NTC Operated

Interruption Of Gas Supply or Flame Failure

Elapsed Time - Gas Valve Open Without Gas

Interruption Of Gas Supply (Internal Error)

Flow/Return Sensor Temperature Test

Fan or Fan Wiring Fault

Circulation Fault (Dry Fire)

Hot Water NTC Fault

False Flame

109

110

117

118

125

128

130

133

134

135

154

160

270

321

384

Table Of Error Codes

Page 10

7.0 Legislation

7.1 Installation, Commissioning, Service & Repair

1. This appliance must be installed in accordance with the manufacturer’s instructions and the regulations in force. Read the instructions fully before installing or using the appliance.

2. In GB, this must be carried out by a competent person as stated in the Gas Safety (Installation & Use) Regulations.

3. Definition of competence: A person who works for a Gas Safe registered company and holding current certificates in the relevant ACS modules, is deemed competent.

4. In IE (Eire), this must be carried out by a competent person as stated in I.S. 813 “Domestic Gas Installations”.

Lifting - This product should be lifted and handled by two people. Stooping should be avoided and protective equipment worn where necessary. Carrying & lifting equipment should be used as required, e.g. when installing in a loft space.

All Gas Safe registered engineers carry an ID card with their licence number and a photograph. You can check your engineer is registered by telephoning 0800 408 5500 or online at www.gassaferegister.co.uk

The boiler meets the requirements of Statutory Instrument “The Boiler (Efficiency) Regulations 1993 No 3083” and is deemed to meet the requirements of Directive 92/42/EEC on the energy efficiency requirements for new hot water boilers fired with liquid or gaseous fuels:-

The product data in Section 9.0 satisfies the requirements of EU regulations no. 811/2013 & no. 813/2013 supplementing directive 2010/30/EU

Type test for purpose of Regulation 5 certified by: Notified Body 0085.

Product/Production certified by: Notified Body 0086.

For GB/IE only.

7.2 Benchmark Commissioning Checklist

1. Please ensure that the installer has fully completed the Benchmark Checklist on the inside back pages of the installation instructions supplied with the product and that you have signed it to say that you have received a full and clear explanation of its operation. The installer is legally required to complete a commissioning checklist as a means of complying with the appropriate Building Regulations (England and Wales).

2. All installations must be notified to Local Area Building Control either directly or through a Competent Persons Scheme. A Building Regulations Compliance Certificate will then be issued to the customer who should, on receipt, write the Notification Number on the Benchmark Checklist.

3. This product should be serviced regularly to optimise its safety, efficiency and performance. The service engineer should complete the relevant Service Record on the Benchmark Checklist after each service.

4. The completed Benchmark Checklist may be required in the event of any warranty work.

Page 11

8.0 Warranty & Service

8.1 General

To make sure your boiler warranty is activated and maintained, it is essential that the:

1. Benchmark checklist is completed by your installer

2. Warranty is registered within 30 days

3. Boiler has an annual service

Please note that failure to adhere to terms and conditions will make your warranty invalid.

8.2 Standard Warranty Terms and Conditions

Warranty Registration, Service & Repair

For full terms and conditions, visit www.baxi.co.uk/terms.

Benchmark Checklist

The Benchmark Checklist will be completed by your installer and records that the boiler has been installed and commissioned correctly. It can be found at the back of the installation and service manual and should be kept in a safe place for the life of the boiler. We will check that the Benchmark Checklist has been completed on an in-warranty visit.

Ways to register your warranty

If your boiler is eligible for an extended warranty, your installer may register the product on your behalf and provide you with the relevant documentation. Please check with your installer.

Should this not be the case, you can register your warranty online at www.baxi.co.uk/registration

To activate a standard two year warranty, please use one of the following methods:

• Freephone 0800 013 7989 or

• Return the enclosed registration card

Page 12

8.0 Warranty & Service

Lift Flap for access to Information Label

Annual Service

A service must be completed every 12 months from the date of installation to maintain your warranty.

This service must be completed by one of the following:

• A Gas Safe registered installer/engineer

• Baxi Customer Support; call us 0344 871 1545

Please make sure that your engineer has logged the service information at the back of the installation and service manual. You will be asked for your service history on any in-warranty repair visit.

If you experience a problem with your boiler

For any in or out of warranty repair, Baxi Customer Support is on hand to help you. Call our award-winning team to arrange for one of our nationwide team of Gas Safe registered engineers to visit.

If your product is in warranty, everything is free of charge, subject to our warranty terms and conditions. If it is out of warranty, we can still help and offer a range of options you can choose from to suit your needs.

Contact Baxi Customer Support 0344 871 1545

Opening hours

Monday - Friday, 8.00am - 6.00pm Weekends and Bank Holidays, 8.30am - 2.00pm Please note calls may be recorded for training and monitoring purposes.

When contacting Baxi Customer Support, please have the following information to hand:

• Boiler serial number. This can be found on the appliance.

• Proof of purchase if you do not have the boiler serial number.

Please note that for in-warranty repairs, our engineers will ask to see your service history record, completed Benchmark Checklist and details of your installer. These can all be found in the installation and user manuals.

Page 13

9.0 ErP Information

9.1 Product Fiche - Combination Boilers

Product fiche for combination boilers

See

Baxi Combi

Space heating - Temperature application

Water heating - Declared load profile

Seasonal space heating energy efficiency class

Water heating energy efficiency class

Rated heat output

(Prated or Psup)

Space heating - Annual energy consumption kWh

Water heating - Annual energy consumption kWh

Seasonal space heating energy efficiency %

Water heating energy efficiency %

Sound power level L

indoors dB

124 128

Medium Medium

XL XL

A A

20 24

17222 20556

62 74

1717

93 93

49 50

For specific precautions about assembling, installing and maintaining, consult the relevant section as detailed on the Contents page.

Page 14

9.0 ErP Information

9.2 Package Fiche - Boilers

Package fiche for boilers indicating the space heating energy efficiency of the package

reliob fo ycneic ﬁfe ygrene gnitaeh ecaps lanosaeS

lortnoc erutarepmeT

utarepmet fo ehc ﬁ morf

lortnoc er

reliob yratnemelppuS

Class IV = 2%, Class V = 3%, Class VI = 4%, Class VII = 3.5%, Class VIII = 5%

grene gnitaeh ecaps lanosaeS

,%5.1 = III ssalC ,%2 = II ssalC ,%1 = I ssalC

)% ni( ycneic ﬁfe y

reliob fo ehc ﬁ morf

‘I’

%( - ‘I’ ) x 0.1 = ±

noitubirtnoc raloS

ecived ralos fo ehc ﬁ morf

)³m ni( emulov knaT )²m ni( ezis rotcelloC

(1)

A* = 0.95, A = 0.91,

ni( ycneic ﬁfe rotcelloC

B = 0.86, C = 0.83, D - G = 0.81

gnitar knaT

%(‘III’ x + ‘IV’ x ) x 0.9 x ( /100) x = +

59.0 esu ,A evoba si gnitar knat fI )1(

pmup taeh yratnemelppuS

pmup taeh fo ehc ﬁ morf

)% ni( ycneic ﬁfe ygrene gnitaeh ecaps lanosaeS

%( - ‘I’ ) x ‘II’ = +

pmup taeh yratnemelppuS DNA noitubirtnoc raloS

eulav rellams tceles

G F E D C B A A

<30%

egakcap fo ycneic ﬁfe ygrene gnitaeh ecaps lanosae

fo ssalc ycneic ﬁfe ygrene gnitaeh ecaps lanosaeS

egakcap

+++

? C°53 ta srettime taeh erutarepmet wol htiw dellatsni pmup taeh yratnemelppus dna relioB

pmup taeh fo ehc ﬁ morf

in a building, as this efﬁ ciency is inﬂ uenced by further factors such as heat loss in the distribution system and the dimensioning of the products in relation to building size and characteristics.

AD-3000743-01

%0.5 x 0.5 x = -

%+ (50 x ‘II’) =

dellatsni ecno ycneic ﬁfe ygrene lautca sti ot dnopserroc ton yam ehc ﬁ siht ni rof dedivorp stcudorp fo egakcap eht fo ycneic ﬁfe ygrene ehT

The value of the seasonal space heating energy efficiency of the preferential space heater, expressed in %. The factor for weighting the heat output of preferential and supple mentary heaters of a package as set out in the following table.

Page 15

9.0 ErP Information

9.2 Package Fiche - Boilers (cont)

IIIIVI

Psup / (Prated + Psup)

(1)(2)

II, package without hot water storage tank II, package with hot water storage tank

The value of the mathematical expression: 294/(11 ʷ Prated), whereby ‘Prated’ is related to the preferential space heater. The value of the mathematical expression 115/(11 ʷ Prated), whereby ‘Prated’ is related to the preferential space heater.

Weighting of boilers

00 0

0.1 0.3 0.37

0.2 0.55 0.70

0.3 0.75 0.85

0.4 0.85 0.94

0.5 0.95 0.98

0.6 0.98 1.00

≥ 0.7 1.00 1.00

(1) The intermediate values are calculated by linear interpolation between the two adjacent values. (2) Prated is related to the preferential space heater or combination heater.

Package efficiency

Baxi Combi

Temperature control X

Temperature control Y %

124 128

Page 16

9.0 ErP Information

9.3 Package Fiche - Combination Heaters (Boilers

or Heat Pumps)

III

Package fiche for combination heaters (boilers or heat pumps) indicating the water heating energy efficiency of the package

retaeh noitanibmoc fo ycneic ﬁfe ygrene gnitaeh retaW

‘I’

:el ﬁorp daol deralceD

noitubirtnoc raloS

ecived ralos fo ehc ﬁ mor

ap fo ycneic ﬁfe ygrene gnitaeh retaW

etamilc egareva rednu egakc

yticirtcele yrailixuA

‘III’

%(1.1 x ‘I’ - 10%) x ‘II’ - - ‘I’ = +

etamilc egareva rednu egakcap fo ssalc ycneic ﬁfe ygrene gnitaeh retaW

G F E D C B A A

+++

XXL

:redloC

:remraW

<28%

snoitidnoc etamilc remraw dna redloc rednu ycneic ﬁfe ygrene gnitaeh retaW

%- 0.2 x =

%+ 0.4 x =

AD-3000747-01

The value of the water heating energy efficiency of the combination heater, expressed in %. The value of the mathematical expression (220 ʷ Q

where Q 15 and Q clared load profile M, L, XL or XXL of the combination heater.

The value of the mathematical expression (Q expressed in %, where Q solar device and Q

is taken from Regulation EU 811/2013, Annex VII Table

ref

from the product fiche of the solar device for the de

nonsol

is taken from the product fiche of the

aux

from Regulation EU 811/2013, Annex VII Ta

ref

ble 15 for the declared load profile M, L, XL or XXL.

)/Q

ref

ʷ 2,5)/(220 ʷ Q

aux

nonsol

dellatsni ecno ycneic ﬁfe ygrene lautca sti ot dnopserroc ton yam ehc ﬁ siht ni rof dedivorp stcudorp fo egakcap eht fo ycneic ﬁfe ygrene ehT

ref

Page 17

Black Taps - Water

Yellow Tap - Gas

10.0 Emergency

If you smell gas

Do not operate light switches Do not operate any electrical equipment Do not use a telephone in the hazardous area Extinguish any naked flame and do not smoke Open windows and doors in the hazardous area Turn off the gas supply at the meter Warn any other occupants and vacate the premises Telephone the National Gas Emergency Service on:0800 111 999

Faulty boiler

If it is known or suspected that a fault exists on the boiler, it must not be used until the fault has been corrected by a competent person.

Warning !

11.1 Disposal and Recycling

NOTE: Removal and disposal of the boiler must be

carried out by a qualified person in accordance with local and national regulations.

11.0 Disposal

Fig. 6

In an Emergency

If a water or gas leak occurs or is suspected, the boiler can be isolated at the inlet valves as follows;

1. If a water or gas leak occurs or is suspected, the boiler can be isolated at the inlet valves by turning their taps through 90° (1/4 turn) (Fig. 6).

3. Call your Installer or Service Engineer as soon as possible.

Page 18

12.0 Notes

Page 19

12.0 Notes

Page 20

7659609-02 (04/17)

Baxi Customer Support

0344 871 1545

Opening hours

Monday - Friday, 8.00am-6.00pm Weekends and Bank Holidays, 8.30am-2.00pm

Please note calls may be recorded for training and monitoring purposes

baxi.co.uk

www.baxi.co.uk/registration

For the warranty to be maintained, please make sure...

Benchmark checklist is completed Warranty is registered within 30 days The boiler has an annual service

For full terms and conditions, visit www.baxi.co.uk/terms. Failure to adhere to terms and conditions will void your manufacturer’s warranty.

Baxi Brooks House, Coventry Road, Warwick, CV34 4LL

Please ensure the boiler is installed in accordance with these installation instructions and that you adhere to the Building Regulations.

e&oe All descriptions and illustrations provided in this document have been carefully prepared but we reserve the right to make changes and improvements in our products which may affect the accuracy of the information contained in this leaflet. All goods are sold subject to our standard Conditions of Sale which are available on request.

0086

baxi 124 Combi, 128 Combi User guide

Specifications and Main Features

Frequently Asked Questions

User Manual