Page 1
NEW STANDARD PORTLIGHT
L
ENS REPLACEMENT ON PRE-2000 PORTLIGHTS
From its intro
duction in 1997 to June 2000 the (New) Standard Portlight was made with hinges and handle
catches fixed to the frame with a pressing / staking process.
This type hinge / handle catch attachment is not user serviceable.
Handle catch fitted with pressed / staking process
Hinge of type fitted with pressed / staking process
In June 2000 the portlight was changes to use screwed on hinges and handle catches that are user serviceable.
The hinges and handle catches sometimes have packers under them to control the seal compression.
Handle catch fitted with screw
Hinge of type fitted with screw
In 2008 the hinges were changed from using M4 fastenings as hinge pins to M5 fastenings as hinge pins. These
do not fit the M4 hinge and on pre-2000 units made from 1997 to 2000 hinges cannot be changed.
On units made from 1997 to 2000 it is necessary to order special lenses. These are on part numbers
361703990 NEW ST 0 GRY LENS PRE2000 M4
361704990 NEW ST 1 GRY LENS PRE2000 M4
361705990 NEW ST 1RE GRY LENS PRE2000 M4
361706990 NEW ST 2 GRY LENS PRE2000 M4
361707990 NEW ST 3 GRY LENS PRE2000 M4
361708990 NEW ST 4 GRY LENS PRE2000 M4
361709990 NEW ST 46 GRY LENS PRE2000 M4
361710990 NEW ST 44 GRY LENS PRE2000 M4
361711990 NEW ST 5 GRY LENS PRE2000 M4
361712990 NEW ST 7RE GRY LENS PRE2000 M4
On units made from 2000 to 2008 with screwed on hinge and M4 hinge pins the hinges can be changed to fit
the new lens.
===000===
10-10-09 New Standard Portlight Lens Spares For Pre200 Ports Page
1 of 1
Loading...