Page 1
->.
1 N :
>1 A>-
Oo
( r\
.
>L
V
°9
The Most r/
/
PNEUMATIC CONTROL
CXTRA EQUIPMENT
SUPPORTING PLATE
SVCCIAL FEATURE
CXTRA
NOTE RIGIDITY OF OLD AND POST
AOjUSTAULC rcco
cl Machine its Capacity on the Market
No. 3 High Speed Multiple Drill
J
HEAD
CAPACITY
NOTC GI NCROUr. SURFACES
DRIVE
-----
KANO CONIIIOL rilOM rnovr oi«
or
trip
------------------
parlnrro
side
CONTROL
FEED
TABLES
COOLANT
Machine is furnished with rectangular head and head is bushed for the following number
of spindles: size of head is maximum drilling area.
16' x 30' Rectangular
20' x 40' Rectangular
21J/4'
x 52' Rectangular
No.
3
balanced by weight inside of post. Provision is made to add or remove small weights to secure
perfect balance - this may be necessary when jig plates are attached to head. Machine is pro
vided with automatic catch which prevents head from falling in
with tight and loose
shaft, through steel spur gears and pinions to spindles. Machine can be readily arranged for
motor
drives quarter turn continuous belt operating main drive shaft
reduction, so that head moves up and down with minimum of effort. Pneumatic control of head
can be furnished if so desired.
trip throws the feed out at predetermined point. All operating levers are conveniently located.
extra
piping and flexible tube to each spindle can be furnished with the machine or added at any
future time.
has a capacity of 24J^' drills or their equivalent in cast iron. The head is counter
Machine can be arranged for belt or motor drive. Belt drive is from 3-step countershaft
drive, in which case motor takes the place of 3-stcp cone on bed at rear of column and
Operation of machine is from the front by means of large spider hand wheel and gear
There are three changes of
Box tables of a
pulleys to
size
cost.
The bed has a continuous oil groove around it with tank under column. Oil pump with
Bushed for 34 or
Bushed for 36 1J^' or
Bushed for 34 \YJ or 24 1 Vf Spindles
cone
on
machine, thence by quarter turn belt to main driving
feed arranged to suit customers' requirements. An automatic
to
suit layout or rotary
16 1 Spindles
20
V/f Spindles
tables can be furnished, the latter at a small
case cable breaks.
TMRCi; STEP CONE PULl’eY TUKNISM
TOR OKI
ICO wi r»
vi:
*
oelt okivi
EQUIPMENT
GENERAL
The regular equipment includes
The Baush High Speed Multiple Drills are universally recognized as
powerful
machines on the market and are very
glad
to
help you in your drilling problems and recommend suitable layouts for special
Box
Table and necessary wrenches, drift keys, etc.
the
economical
in
repairs. Our Engineers will be
most rugged and
cases.
O
BAUSH MACHINE TOOL COMPANY g
:
SPRINGFIELD, MASS.
Loading...