Baumer VisiLine IP cameras User Manual
4 M3 depth 5
8 M3 depth 5
12 9 12,920,2
26
45 8 52 9 12 9
46
46
14,3
49,5ø
8,3
41 5 3 1
26
8 3
side viewfront view
49,5ø
44
ø
12
Art. No.: 11089149
optional
Art. No.: 11088325
35
46ø
44
38,2ø
Product Specication
VisiLine IP – Innovative functionality / exible installation
Protection class: IP65/67 ▪
Flexible assembly ▪
RGB and YUV interpolation algorithms on board ▪
Bandwidth up to 1000 Mbit/sec for fast multi-camera operation ▪
Flexible system architecture due to cable length up to 100 m ▪
Baumer driver for reliable image transfer ▪
PoE (Power over Ethernet) ▪
Dimensions
Quick Start Guide
VisiLine IP Gigabit Ethernet cameras
Latest software version and technical
documentation are available at:
www.baumer.com/vision/login
Safety
Conformity:
CE, FCC Part 15 Class B, RoHS
FCC – Class B device
No t e : This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructios,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occure in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna. ▪
Increase the separation between the equipment and the ▪
receiver.
Connect the equipment into an outlet on a circuit different ▪
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician ▪
for help.
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com Phone +49 (0)3528 4386-0 Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH Badstrasse 30 DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 07/13. v1.2 11110650
Safety Precautions
Notice
See User s Guide for the complete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Avoid camera contamination by ▪
foreign objects.
Environmental Requirements
Storage temp. -25°C ... +70°C
Operating temp. see Heat Trans-
Humidity 10 % ... 95 %
mission
Non-condensing
Camera Type
Sensor
Size
Resolution
CCD Sensor (monochrome / color)
VLG-02M.I / VLG-02C.I 1/4" 656 x 490 160
VLG-12M.I / VLG-12C.I 1/3" 1288 x 960 42
VLG-20M.I / VLG-20C.I 1/1.8" 1624 x 1228 27
CMOS Sensor (monochrome / color)
VLG-22M.I / VLG-22C.I 2/3" 2044 x 1084 55
VLG-40M.I / VLG-40C.I 1" 2044 x 2044 29
System Requirements
Single-camera system Multi-camera system
Minimum Recommended Minimum Recommended
CPU
Clock
RAM
Operating
system
(OS)
Graphic
Ethernet
Framework
(optional)
Intel® Pentium®4
or comparable
processor
2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz
1024 MB 2048 MB 2048 MB > 2048 MB
Microsoft® Windows® XP incl. Service Pack 2 or higher
Intel® Core™ Duo comparable processor
Microsoft® Windows® XP x64 incl. Service Pack 2 or higher
Microsoft® Windows Vista™ 32 / 64 bit systems
Microsoft® Windows 7 32 / 64 bit systems
Linux® 32 / 64 bit systems from Kernel 2.6.xx
recommended resolution 1280 x 1024, color depth at least 16 bit
Gigabit Ethernet compliant NIC (recommended Intel® chipset)
Windows® OS: NET™ Framework 2 0 or higher
Linux® OS: Mono 1 2.4 or higher
Full Frames
[max. fps]
Dimensions
1
2
open wire
2
1
8
7
6
5
4
3
1
2
3
4
5
6
7
8
open wire
T
General Description
1
2
4
5
3
LED Signaling
Heat Transmission
Caution
Heat can damage the camera. Provide adequate dissipation of heat,
to ensure that the temperatures does not exceed the value in the table
below.
As there numerous possibilities for installation, Baumer do not speciy a
specic method for proper heat dissipation.
No. Description No. Description
1 Tube 4 Power Supply / Digital-IO
2 C-Mount lens connection 5 Data- / PoE-Interface
3 LED´s
Data Interface / Process- / Power-Interface
Notice
The VisiLine IP supports PoE (Power over E hernet) IEEE 802.3af Clause 33,
48 V power supply.
Data- / PoE- Interface
(wire colors of the connecting cable*)
1 D1+ white/orange
2 D1- orange 2 Power VCC+ brown
Process- / Power- Interface
(wire colors of the connecting cable)
1 OUT 3 white
3 D2+ white/green 3 IN1 green
4 D2- green 4 IO GND yellow
5 D4+ white/brown 5 U
6 D4- brown 6 OUT 1 pink
7 D3- white/blue 7 Power GND blue
OUT grey
ext
8 D3+ blue 8 OUT 2 red
*Phoenix cable / other cable may differ
LED Signal Meaning
green Link active
1
green ash Receiving
red ash Transmitting
2
green Power
red Readout active
Installation
Installation of the camera:
Connect the camera using ▪
an appropriate cable (at least
Cat-5e) to the GigE board on
your PC.
If required, connect a trigger ▪
and / or flash to process
interface.
Installation sample
Connect the camera to power supply. ▪
1 - PCI board; 2 - GigE cable;
3 - Cable for power, trigger and ash
Installation of cameras with PoE:
Connect the camera using an appropriate ▪
cable (at least Cat-5e) to a free port of a PoE capable ethernet switch.
Establish the connection between switch and GigE board on your PC. ▪
If required, connect a trigger and or flash to process interface. ▪
Measure Point Maximal Temperature
T 50°C (122°F)
Notice
Further technical details,
e.g. the electrical data, are
available in the respective
data sheets.
Installation sample
1 - PCI board;
2 - GigE cable;
3 - PoE capable ethernet switch
or Baumer PoE components;
4 - Cable for trigger and ash
Loading...