Baumer MXU User Manual
Product Specication
!
X°
B
A
Length from A to B = 94 mm
1, 2
13,4
8,2
48
28,35
43,4
43, 4
48
8,3
100
28, 5
28,5
14
24
74, 45
3x
ø1, 8
4x
ø2, 7
20
2x
M3/ 3
246/ 6
175
26
26
12
2x
M3/ 3
246/ 6
2x
M2/ 3
157/ 6
225
175
145
Ø 30
33
145
UN 1" 32 12
C-Mount adapter (optional)
S-Mount adapter (optional)
26
3 5
33
9 4
19
4x M3 /3
9
4
M12 x 0 5
MXU series – Innovative functionality / exible installation
Flexible assembly ▪
Requires little space ▪
RGB and YUV interpolation algorithms on board ▪
Reliable transmission at 5000 Mbit/sec according to USB 3.0 standard ▪
Single cable solution for data and power ▪
Baumer driver for reliable image transfer ▪
Dimensions
Quick Start Guide
MX Board Level Cameras (USB3 Vision™)
Latest software version and technical
documentation available at:
www.baumer.com/vision/login
Safety
CE
Baumer MX board level cameras are delivered without
housing. The housing design is critical to a camera's
electromagnetic interference characteristics.
For this reason, no CE certication tests regarding electromagnetic interference have been performed on MX board
level cameras.
Users who add MX board level cameras into their systems
should perform appropriate tests for electromagnetic
interference.
Further Information
For further information about our products, please visit www baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com Phone +49 (0)3528 4386-0 Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH Badstrasse 30 DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter is not guaranteed.
Subject to change without notice. Printed in Germany 12/13. v1.0 11121334
Safety Precautions
Notice
See the User's Guide for the
complete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Do not allow the camera to ▪
become contaminated with foreign
objects.
Environmental Requirements
Storage temp. -10°C ... +70°C
Operating temp. see Heat Transmis-
Humidity 10 % ... 90 %
Caution
Observe precautions for
handling electrostatically
sensitive devices!
Non-condensing
sion
Camera Type
Sensor
Size
Resolution
CCD Sensor (monochrome / color)
MXU02 / MXU02c
MXU12 / MXU12c
MXU20 / MXU20c
1/4" 656 x 490 160
1/3" 1288 x 960 42
1/1.8" 1624 x 1228 27
CMOS Sensor (monochrome / color)
MXUC20 / MXUC20c
MXUC40.2 / MXUC40c.2
2/3" 2044 x 1084 55
1" 2044 x 2044 29
System Requirements
Single-camera system
Recommended
CPU DUAL-Core, Intel
W3503
®
Xeon®
Multi-camera system
Recommended
DUAL-Core, Intel® Xeon®
W3503
Clock 2.4 GHz 2.4 GHz
RAM 4 GB 4 GB
®
Opera ing
system (OS)
Microsoft
Microsoft
Windows® 7 32 / 64 bit systems (required for USB 3.0)
®
Windows® 8 32 / 64 bit systems (required for USB 3.0)
Notice
Further technical details are
available on the respective
data sheets.
Full Frames
[max. fps]
Installation
Connecting the exprint cable
Notice
Observe the markings when connecting the exprint cable.
Mechanical Mounting
Caution
Incorrect bending radius for the exprint cable.
An incorrect bending radius can damage the exprint cable.
Only bend the exprint cable to a radius of up to 3 mm!
LED
open wire
12345 678910
1
8
General Description
1
2
4
5
3
T
LED signals
Heat Transmission
Caution
Heat can damage the camera. Heat must be dissipated adequately to
ensure that the temperatures do not exceed the values in the table below.
As there numerous options for installation, Baumer does not specify a
specic method for proper heat dissipation.
For applications with enough free space, the use of the Baumer heat sink
(No. 11118288) is recommended.
Caution
Device heats up during opera ion.
Skin irritation possible.
Do not touch the camera and/or heat sink during operation.
No. Description No. Description
1 Print sensor 4 Digital IOs
2 Flexprint cable 5 USB 3.0 port
3 System print
Data Interface / Digital IOs
USB 3.0 Micro B
1 VBUS 6 MicB_SSTX2 D- 7 MicB_SSTX+
3 D+ 8 GND_DRAIN
4 ID 9 MicB_SSRX5 GND 10 MicB_SSRX+
Caution
The General Purpose IOs (GPIOs) are not potential-free and do not have
an overrun cut-off. Incorrect wiring (overvoltage, undervoltage or voltage
reversal) can lead to defects within the electronics system.
GPIO Power VCC: 3.3 V DC
IOUT: max. 8 mA
The GPIOs are congured as an input through the default camera
settings. They must be connected to GPIO_GND if not used or not
congured as an output.
Digital IOs
1 Shielding 5 GPIO1
2 IN1 6 GPIO2
3 IO GND 7 IO Power VCC
4 OUT 1 8 GPIO_GND
Signal Meaning
green USB 3.0 connection
LED
yellow
Installation
Installing the camera:
Connect the camera ▪ to the USB
connection on your PC using an
appropriate cable.
If required, connect a trigger ▪
and / or flash to the digital IOs.
USB 2.0 connection
(settings possible, no image)
Installation example
1 - PCI USB board
2 - USB cable
3 - Cable for trigger and ash
Measurement Point Maximum Temperature
T 80°C (176°F)
Troubleshooting
1. Check camera operation using the LED signals.
→ If LED is yellow:
• Camera is connected to USB 2.0 (settings possible, no image).
→ If LED is green:
• Check if camera is being used by another application.
• Otherwise reconnect camera / restart software.
2. Check connection using Windows Device Manager:
→ If device is not listed:
• Check the host controller power supply.
• Check USB 3.0 cable and connection.
→ If device is regularly not listed
• Check USB 3.0 driver installation.
Loading...