Baumer MXG User Manual
Product Specication
!
X°
B
A
Length from A to B = 94 mm
48
43,4
14
24
28,5
43,4
100
74,45
17,6
8
48
18,8
2x
M3/ 3
2,46/ 6
17,5
26
26
12
2x
M3/ 3
2,46/ 6
2x
M2/ 3
1,57/ 6
22,5
17,5
14,5
Ø 30
33
14,5
UN 1"-32 12
C-Mount adapter (optional)
2 7ø
4x
1 8ø
3x
MXG series – Innovative functionality / exible installation
Flexible assembly ▪
Small space is required ▪
RGB and YUV interpolation algorithms on board ▪
Bandwidth up to 1000 Mbit/sec for fast multi-camera operation ▪
Flexible system architecture due to cable length up to 100 m ▪
Baumer driver for reliable image transfer ▪
PoE (Power over Ethernet) ▪
Dimensions
Quick Start Guide
MXG Gigabit Ethernet cameras
Latest software version and technical
documentation are available at:
www.baumer.com/vision/login
Safety
CE
The Baumer MXG Board level cameras are delivered
without housing. The housing design is critical to the electromagnetic interference characteristics of a camera.
Therefore no CE certication tests regarding electromagnetic interference have been performed for MXG board
level cameras.
Users who design MXG board level cameras into their
systems should perform appropriate testing regarding
electromagnetic interference.
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com Phone +49 (0)3528 4386-0 Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH Badstrasse 30 DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 08/13. v2.0 11094214
Safety Precautions
Notice
See User s Guide for the com-
plete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Avoid camera contamination by ▪
foreign objects.
Environmental Requirements
Storage temp. -10°C ... +70°C
Operating temp. see Heat Trans-
Humidity 10 % ... 90 %
Caution
Observe precautions for
handling electrostatic
sensitive devices!
mission
Non-condensing
Camera Type
Sensor
Size
CCD Sensor (monochrome / color)
MXG02 / MXG02c
MXG12 / MXG12c
MXG20 / MXG20c
1/4" 656 x 490 160
1/3" 1288 x 960 42
1/1.8" 1624 x 1228 27
CMOS Sensor (monochrome / color)
MXGC20 / MXGC20c
MXGC40 / MXGC40c
2/3" 2044 x 1084 55
1" 2044 x 2044 29
System Requirements
Single-camera system Multi-camera system
Minimum Recommended Minimum Recommended
CPU
Clock
RAM
Operating
system
(OS)
Graphic
Ethernet
Framework
(optional)
Notice
Further technical details (e.g.
power supply) available in
the respective data sheets.
Intel® Pentium®4
or comparable
processor
2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz
1024 MB 2048 MB 2048 MB > 2048 MB
Microsoft® Windows® XP incl. Service Pack 2 or higher
Microsoft® Windows® XP x64 incl. Service Pack 2 or higher
Microsoft® Windows Vista™ 32 / 64 bit systems
Microsoft® Windows 7 32 / 64 bit systems
Linux® 32 / 64 bit systems from Kernel 2.6.xx
recommended resolution 1280 x 1024, color depth at least 16 bit
Gigabit Ethernet compliant NIC (recommended Intel® chipset)
Windows® OS: NET™ Framework 2 0 or higher
Linux® OS: Mono 1 2.4 or higher
Resolution
Full Frames
[max. fps]
Intel® Core™ Duo comparable processor
Installation
Connection of the Flexprint Cable
Notice
Pay attention on the marks by connecting the exprint cable.
Mechanical Mounting
Caution
Incorrect bending radius of the exprint cable.
An incorrect bending radius can damage the exprint cable.
Bend the exprint cable only up to a radius of 3 mm!
1
2
open wire
18
1
3
1
8
open wire
General Description
1
2
4
5
6
3
T
LED Signaling
Heat Transmission
Caution
Heat can damage the camera. Provide adequate dissipation of heat,
to ensure that the temperatures does not exceed the value in the table
below.
As there numerous possibilities for installation, Baumer do not speciy a
specic method for proper heat dissipation.
For applications with a corresponding free space, he use of the Baumer
heat sink (No. 11098288) is recommended.
Caution
Device heats up during opera ion.
Irritation of skin possible.
Don’t touch camera and/or heat sink during operation.
No. Description No. Description
1 Sensor print 4 Power supply
2 Flexprint cable 5 Ethernet Port
3 System print 6 Digital IO
Data Interface / Power Supply / Digital IOs
Notice
The MXG supports PoE (Power over Ethernet) IEEE 802.3af Clause 33, 48 V
power supply.
8P8C mod jack with LEDs
1 (gn/wh) MX1+ (negative / positive V
2 (gn) MX1- (negative / positive V
3 (og/wh) MX2+ (positive / negative V
4 (bu) MX3+
5 (bu/wh) MX36 (og) MX2- (positive / negative V
7 (bn/wh) MX4+
8 (bn) MX4-
Power supply
(JST BM03B-SRSS-TB)
(JST BM08B-SRSS-TB)
Digital IOs
1 Shielding 1 Shielding
2 Power V
3 Power GND 3 GND IN
cc
2 IN 1
4 OUT 1
5 OUT 2
6 OUT 3
7 U
8 Shielding
ext
OUT
LED Signal Meaning
green Link active
1
green ash Receiving
2 yellow Transmitting
Measure Point Maximal Temperature
T 70°C (158°F)
Installation
Installation of the camera:
Connect the camera using ▪
an appropriate cable (at least
Cat-5e) to the GigE board on
your PC.
If required, connect a trigger ▪
)
port
)
port
)
port
)
port
and / or flash to process
interface.
Connect the camera to power supply. ▪
Installation of cameras with PoE:
Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a ▪
PoE capable ethernet switch.
Establish the connection between switch and GigE board on your PC. ▪
If required, connect a trigger and or flash to process interface. ▪
Installation sample
1 - PCI board; 2 - GigE cable;
3 - Cable for trigger and ash; 4 - Power cable
Installation sample
1 - PCI board;
2 - GigE cable;
3 - PoE capable ethernet switch
or Baumer PoE components;
4 - Cable for trigger and ash
Loading...