Quick Start Guide
8
8
LXG cameras with VisualApplets (Gigabit Ethernet)
Download latest camera software:
www.baumer.com/vision/software
Download latest technical documentation:
www.baumer.com/cameras/docs
Product Specication
LXG cameras with VisualApplets (image preprocessing)
▪ Single Gigabit Ethernet progressive scan CMOS camera
▪ GigE VisionTM standard compliant
▪ True partial scan function (ROI) for increased frame rates
▪ High Dynamic Range (HDR) image acquisition
▪ External synchronization via industrial compliant process interface (trigger / flash)
▪ Global shutter architecture for minimized motion blur
▪ Power over Ethernet (PoE) support
▪ Standard RJ45 connectors
▪ Excellent image quality
▪ Camera parameter programmable in real-time
▪ VisualApplets based image processing
Notice
Further technical details are available in the respective data sheet.
Dimensions Camera with C-Mount
1"-32 UN
60
Pixel 0,0
8 x M3 x 6
18,055 ±0,025
604747
35,8
54,25
52,35
44,75
8
30
26
6
26
8
26
8 x M3 x 6
48,8
17,5
19,7
20
14,7
14,7
Conformity / Safety
Conformity:
CE, RoHS
CE
We declare, under our sole responsibility, that the previously described Baumer LXG cameras with VisualApplets
conform with the directives of the CE.
RoHS
All LXG cameras with VisualApplets comply with the
recommendation of the European Union concerning RoHS
Rules.
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
support.cameras@baumer.com · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 07/19. v14 11162762
Safety Precautions
▪ Protect the sensor from dirt and
moisture.
▪ Never open the camera housing.
▪ Avoid camera contamination by
foreign objects.
Environmental requirements:
Storage temp. -10 °C ... +70 °C
Operating temp. +5 °C ... +50 °C
Housing temp. max. +50 °C
Humidity 10 % ... 90 %
Non-condensing
Dimensions Camera with M58-Mount
60
47
60
47
M58 x 0,75
Pixel 0,0
4 x M3 x 6
35,8
12 ±0 ,25
54,25
52,35
44,75
8
26
19,7
26
8
26
8 x M3 x 6
Lens Adapter for Cameras with M58-Mount
▪ Adapter M58 / F-mount (Art. No.: 11117852)
48,8
17,5
14,7
▪ Adapter M58 / M42x1-mount (26.8mm) (Art. No.: 11127232)
▪ Adapter M58 / M42x1-mount (45.5 mm) (Art. No.: 11137781)
Notice
20
14,7
suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I,
Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-mount,
LM35LF P-mount)
▪ Adapter M58 / C-mount (Art. No: 11115198)
General Description
8
5
7
3
7
open wire
4
5
LED Signaling
1
2
3
Installation
Installation sample without PoE
1 - network interface card
2 - network cable
3 - Process interface- / Power cable
4 - Process interface cable (RS485)
open wire
4
5
No. Description No. Description
LXG-20/40
C-mount only.
1
LXG-120/200
lens mount (M58), adapter for
other lens mounts available
2 Data Port 1 (PoE) 5 Digital-IO (RS485)
3 Power Supply / Digital-IO
Data Interface
Notice
The Data port supports Power over Ethernet (36 VDC .. 57 VDC).
wire colors of the connecting cable
1 green/white MX1+
2 green MX1-
3 orange/white MX2+
4 blue MX3+
5 blue/white MX3-
6 orange MX2-
7 brown/white MX4+
8 brown MX4-
4 Signaling-LED
Data / Control
1000 Base-T
1
8
LED2
LED1
4
Signal Meaning
green on Power on, link good
green blinking Power on, no link
Camera
LED
Power Supply and Process Interfaces
Power and Process Interface #1
SACC-DSI-M8MS-8CON-M8-L180 SH
1 white OUT 3 (line 3) 1 white In2_RS485+ (line4)
2 brown Power VCC+ 2 brown In2_RS485- (line4)
3 green IN 1 (line 0) 3 green In2_RS485+ (line5)
4 yellow IO GND 4 yellow In2_RS485- (line5)
5 grey IO Power VCC 5 grey OUT3_In2_RS485+ (line6)
6 pink OUT 1 (line 1) 6 pink OUT3_In2_RS485- (line6)
7 blue Power GND 7 blue external Power GND
8 red OUT 2 (line 2) 8 red external Power 5 V/200 mA
red on Error
red blinking Warning (update in progress, don’t switch off)
yellow Readout active
M8 / 8 pins wire colors of the connecting cable
4
6
Power VCC 12 VDC ... 24 VDC
LED
Installation sample with PoE via NIC
1 - PoE network interface card (NIC)
2 - network cable (PoE)
3 - Process interface cable
4 - Process interface cable (RS485)
open wire
4
Installation sample with PoE via Injector
1 - network interface card (NIC)
2 - Injector
3 - network cable (with PoE)
4 - Process interface cable
5 - Process interface cable (RS485)
Heat Transmission
Power and Process Interface #2 (RS485)
SACC-DSI-M8FS-8CON-M10-L180 SH
2
1
3
4
2
5
8
6
1
Caution
Provide adequate dissipation of heat, to ensure that the temperature
does not exceed +50 °C (+122 °F).
The surface of the camera may be hot during operation and immediately
after use. Be careful when handling the camera and avoid contact over a
longer period.
As there are numerous possibilities for installation, Baumer do not speci-
y a specic method for proper heat dissipation, but suggest the following
principles:
▪ operate the cameras only in mounted condition
▪ mounting in combination with forced convection may provide proper
heat dissipation
Power Supply
T
T
RJ45 LEDs
Signal Meaning
green on Link on
green blinking Link activity
Amber on GigE speed
Amber blinking 100 MB speed
Measure Point Maximal Temperature
T +50 °C (122 °F)
Loading...