Baumer EXG User Manual
26
26
36
36
4
x
M
3
36
36
42
C-Mount
18
1
4
3
1
2
4
3
1
2
Quick Start Guide
open wire
w
w
w
.
b
a
u
m
e
r
.
c
o
m
EXG Gigabit Ethernet cameras
Product Specication
EXG series – State-of-the-art CMOS Matrix Cameras
Simple integration by GigE Vision ▪
®
compliance
Resolution up to 5.0 megapixels in color and monochrome ▪
Innovative technology with High Dynamic Range (HDR), Auto-Exposure and Auto- ▪
Gain
Minimal dimensions with 36 x 36 x 42 mm ▪
Camera Type
Monochrome / Color
EXG03 / EXG03c 1/3" 752 x 480 / 748 x 476 60
EXG50 1/2.5" 2592 x 1944 14
Sensor
Size
Resolution
Dimensions
Full Frames
[max. fps]
Process and Data Interfaces
8P8C mod jack M8 3 pins M8 4 pins
1 (gn/wh) MX1+ 1 (bn) Power VCC1 (bn) TrigIN+
2 (gn) MX1- 3 (bu) GND 2 (wh) TrigIN3 (og/wh) MX2+ 4 (bk) NC 3 (bu) Flash
4 (bu) MX3+ 4 (bk) U
5 (bu/wh) MX36 (og) MX27 (bn/wh) MX4+
8 (bn) MX4-
Power Supply
Power V
CC
8 VDC ... 30 VDC
Current I 620 mA ... 120 mA
Power consumption P approx. 3.5 ... 6 W
Further technical
details available in
the respective data
sheets.
LED Signaling
out
ext
Safety
Conformity:
CE, FCC Part 15 Class B, RoHS
FCC – Class B device
No t e : This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructios,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occure in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna. ▪
Increase the separation between the equipment and the ▪
receiver.
Connect the equipment into an outlet on a circuit different ▪
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician ▪
for help.
Further Information
For further information on our products visit www.baumeroptronic.com
For technical issues, please contact our technical support:
support@baumeroptronic.com · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 12/04. V1.1 11037878
Safety Precautions
Notice
See user´s Guide for the complete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Never open the camera housing. ▪
Avoid camera contamination by ▪
foreign objects.
Environmental requirements:
Storage temp. -10°C ... +70°C
Operating temp. +5°C ... +50°C
Housing temp. max. +50°C
Humidity 10 % ... 90 %
Non-condensing
System Requirements
Single-camera system Multi-camera system
Minimum Recommended Minimum Recommended
CPU
Intel® Pentium®4
or comparable
Clock
RAM
Operating
processor
2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz
1024 MB 2048 MB 2048 MB > 2048 MB
system
(OS)
Graphic
Ethernet
Framework
recommended resolution 1280 x 1024, color depth at least 16 bit
Gigabit Ethernet compliant NIC (recommended Intel® chipset)
(optional)
Tested according to standard
EMVA 1288
Intel® Core™ Duo comparable processor
Microsoft® Windows® XP incl. Service Pack 2 or higher
Microsoft® Windows® XP x64 incl. Service Pack 2 or higher
Microsoft® Windows Vista™ 32 / 64 bit systems
Linux® 32 / 64 bit systems from Kernel 2.6.xx
Windows® OS: .NET™ Framework 2.0 or higher
Linux® OS: Mono 1.2.4 or higher
LED Signal Meaning
1
2
Installation
Installation of standard cameras:
Connect the camera using an ▪
appropriate cable (at least Cat5e) to the GigE board on your
PC (8P8C mod jack)
If required, connect a trigger ▪
and / or flash to the 4-pin M8
male connector
Connect the camera to power supply ▪
green Power on
yellow Readout active
green Link active
green ash Receiving
yellow Transmitting
yellow / red ash Receiving and Transmitting
Installation sample
1 - PCI board; 2 - GigE cable;
3 - Cable for trigger and ash; 4 - Power cable
Mounting Adapters
Name Item-No.
Documentation and Software
Notice
Tripod mounting adapter 11003060
The product documentation and software as well as accompanying tools and applications notes can be obtained in the
download area:
http://www.baumer.com/de-en/services/member-area/
A registration is required.
Front mounting adapter 11002638
Loading...