Baumatic GEH6019 User Manual

User Manual for your

GEH6019

Cooker Hood

NOTE: This User Instruction Manual contains important

information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference.

Dear Customer,

Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your

warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get th e most out of your appliance. For

example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LE D cl ock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.

It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.

We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:

1300 306 973

Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.

Kind regards

Management

Think Appliances

CONTENTS

YOUR COOKER HOOD’S SPECIFICATIONS ….……………..………….2

IMPORTANT SAFETY INFORMATION……………………………….…3-4

CARING FOR THE ENVIRONMENT…………………………………………5

USING YOUR COOKER HOOD………………………………..……………..6

MAINTAINING AND CLEANING YOUR COOKER HOOD ……….7-9

INSTALLATION INSTRUCTIONS ……………………….……...….10-11

ELECTRICAL CONNECTION……………10

INSTALLING THE COOKER HOOD……11

TROUBLESHOOTING ……………………………………………12

CONDITIONS OF GUARANTEE……………………………………………13

HT

11/02/11

1

Specifications of your GEH6019 Cooker Hood

Congratulations on purchasing a Cooker Hood!

To fully enjoy using your appliance long into the future,
please firstly familiarise yourself with its specifications,
safety advice and operational instructions included in this
manual. You will also need this manual to ensure that your
Cooker Hood has been installed properly.

DIMENSIONS

Width: 600 mm
Depth: 450 mm (extended), 280 mm (encased)
Height: 270 mm

Your stainless steel Cooker Hood is fitted with:

• High extraction tangential motor

• Electrical button control operation

• 3 speeds

• 2 metallic grease filters

• 2 lights

Extraction capacity – 750 m
Optional Extra

: 1 x Pair of S1 Carbon filters for air

recirculation.

NOTE:

RECIRCULATION MODE OR IN EXTRACTION MODE. TO USE THE HOOD IN RE­CIRCULATION MODE, YOU WILL NEED TO FIT THE CARBON FILTER.

IF YOU WANT TO USE YOUR COOKER HOOD IN EXTRACTOR MODE, YOU WILL
NEED TO FIT DUCTING (DIAMETER OF 125MM) TO THE SPIGOT (SEE
INSTALLATION DIAGRAM) AND WORK IT THROUGH A HOLE OF 130MM SO THAT IT
IS EXPELLING FUMES THROUGH A DEDICATED FLUE SYSTEM THAT ISN’T
COMBINED WITH OTHER EXHAUSTS.

PLEASE NOTE THAT YOUR COOKER HOOD CAN BE USED EITHER IN

³/hr

2

Important Safety Information : Please Read this before installing & using.

o Any installation work must be

carried out by a qualified
electrician or competent person.

o The hood must be installed in

accordance with the installation
instructions and all measurements
followed.

o If the cooker hood is

installed for use above a gas
appliance then the provision for
ventilation must be in accordance
with the Australian Standard AS

5601.

o It is dangerous to alter the

specifications or to modify this
product in any way. Do not tamper
with it or attempt to alter it in the
attempt to customise it further.

o When installing the hood,

ensure that the following
recommended distances are being
observed between the cooker top
and the bottom of the cooke r hood:

9 Electric cookers

700 mm

9 Gas cookers

700 mm

9 Coal/ oil cookers

800 mm

* NOTE - DO NOT SET YOUR
COOKER HOOD LESS THAN
600 mm ABOVE YOUR
COOKER!

:

:

:

o When installed between

adjoining wall cabinets,
the cabinets must not
overhang the hob and
their undersides must be
at least 50 mm off from
the hob edges.

o The edges of the cooker

hood are sharp – be
mindful of this as you
handle your appliance,
especially during
installation and cleaning.

DO NOT CLEAN IN
BEHIND THE GREASE
FILTERS!

o If the room where the

cooker hood is to be used
contains a fuel burning
appliance such as a
central heating boiler
then its flue must be of
the sealed or balanced
flue type.

o If other types of flue or

appliances are fitted,
ensure that there is an
adequate supply of air in
the room.

o When the hood is being

used in its extractor
function, ensure that the
ducting is fire retardant
and that there are no
bends sharper than 90
degrees as this will
reduce the efficiency of
the hood.

3