Baumatic BR11.5 User Manual
BR11.5
Built under fridge
with icebox
33U d
USER MANUAL FOR YOUR BAUMATIC
BR11.5
Built under fridge
with icebox
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference. for
you or any person not familiar with the operation of the appliance.
JW 03/07/12
2
Contents
Environmental note 4
Important safety information 5 – 6
Specifications of your larder fridge 7 – 10
Specifications 7
Dimensions 7
Description of the appliance 8
Description of the product features 9 - 10
Using your Baumatic larder fridge 10 - 11
Before switching on 10
During first use 10
Turning on the appliance and setting the thermostat 11
Arranging and storing food in your refrigerator 12 - 13
Arranging and storing food in your ****freezer 13 – 14
Making ice-cubes 15
Saving energy when using your fridge-freezer 15 - 16
Cleaning and maintenance 17 - 20
Defrosting the refrigerator compartment 17
Defrosting the freezer compartment 18
Cleaning of the condenser 18
Periodical cleaning of the condenser 19
Replacing the light bulb 20
Installation 20 - 29
Electrical connection 20 - 21
Positioning 21
Aperture dimensions 22
Adjusting the height and levelling off your larder fridge 23
Installing your refrigerator 24
Installing the kitchen cabinet door 25 – 26
Fastening the refrigerator to the worktop 27
Reversing the refrigerator door 28
Reversing the freezer compartment door 29
Troubleshooting 30 – 31
Baumatic consumables 32
Technical data 33
Contact details 34
3
Environmental note
Note
: Before discarding an old appliance, switch off and
disconnect it from the power supply. Cut off and render any plug
useless. Cut the cable off directly behind the appliance to prevent
misuse. This should be undertaken by a competent person. Disable
the door lock to make sure that children cannot get stuck inside
the appliance.
4
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Advice Line.
IMPORTANT: Any installation work must be
carried out by a qualified electrician or competent
person.
Use of the appliance
o Your appliance is only designed to be used in the
home. It is suitable for storing food that needs to
be chilled and refrigerated. If it is used for any
other purpose or it is not used correctly, then
Baumatic Ltd. will accept no liability for any
damage that might be caused.
o Altering the specification of the appliance must not be attempted
for reasons of safety.
Before using your appliance
o Check the appliance for any signs of transport damage. If you
notice any damage, then you should not connect your appliance
to your mains supply and should contact your supplier.
Refrigerant
o Your appliance contains R600a refrigerant, which is a natural gas
that does not contain CFCs that can damage the environment.
However it is a flammable substance, therefore care should be
taken:
During the transportation and installation of the
appliance, make sure that the refrigeration pipework
does not get damaged.
If it does become damaged then sources of ignition
and open flames should be avoided. Also the room
that the appliance is situated in should be thoroughly
ventilated.
o Do not place any objects on top of the
appliance, as this may damage the table top.
5
Child safety
o Packaging material should be kept away from
children.
o Children should not be allowed to touch the
controls or play with the appliance.
General safety
o Do not pull on the power supply cable to remove the plug from
your mains supply socket.
o Do not pull out or insert the plug with wet hands.
o Do not attempt to use your appliance outdoors or
any place where it is likely to come into contact
with the elements.
o Before cleaning the appliance or performing maintenance work,
ensure that the appliance has been disconnected from your
mains supply.
o Never allow the back coils of the appliance to come into contact
with the wall surface.
o Always ensure that the location where you are installing your
appliance is free of stored items such as papers and other
flammable materials.
o Never block the ventilation openings of the appliance, either on
the inside or its exterior.
o It is vital to keep your appliance well ventilated,
so that there is proper air flow between the
bottom of the unit and the plinth/kick plate
which it is sitting on.
o Do not place electrical devices inside of the appliance, such as
mixers and electric ice cream makers.
Service
You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department.
6
Specifications of your larder fridge
o Total gross / net capacity: 130 / 126 litres
o Gross capacity fridge / icebox: 109 / 21 litres
o Net capacity fridge / icebox: 105 / 21 litres
o **** Freezer compartment
o Freezing capacity: 2 kg / 24 hours
o Automatic defrost (fridge)
o Adjustable thermostat
o Reversible door
o Door-on-door fittings
o Adjustable feet
o 2 safety glass shelves
o Salad crisper
o Egg rack
o Bottle rack
o Butter and cheese compartment
o Ice cube tray
Dimensions of appliance Dimensions of aperture*
Height: 818 - 898 mm Height: 820mm-900mm
Width: 596 mm Width: 600 mm (min)
Depth: 545 mm Depth: 550 mm (min)
7
Energy efficiency class
Energy class: A+
* Please refer to the installation instructions for more specific
information on the size of aperture that you will require.
IMPORTANT: When you install your appliance it is important to bear
in mind its climatic rating.
In order to find out the climatic rating of your appliance, you should
check the rating plate. The rating plate is located on the front left edge
of the inside of the fridge. You will need to open the door of your
appliance to be able to find it.
The rating plate will indicate the ambient temperature range that your
appliance will function correctly within.
Description of the appliance
A) Refrigerator section
B) **** Freezer compartment
1) Safety shelves
2) Defrost water outlet
3) Salad crisper
Description of the product features
1) Shelves
o The shelves may be placed in any of
the guide slots within the interior of
the appliance. They are protected from
sliding out.
o To alter the shelf position: Lift the
shelf and pull it towards you until it
reaches the crack in the guide slot. At
the guide interruption point, the shelf
may be adjusted to the height of your
choice. Push the shelf all the way in to
the rear end of the guide slot.
o To remove a shelf
it reaches the crack in the guide slot. At the guide interruption
point, lift the left side of the shelf up (2) and pull it out from the
appliance in the inclined position (3). Reinsertion is carried out
in the opposite procedure.
2) Defrost water outlet
o The interior of the refrigerator is cooled by the cooling plate that
is on the rear wall. Beneath this there is a channel and an outlet
for the defrost water.
o It is important that this channel never becomes clogged (see
“Defrosting the refrigerator compartment” for a detailed
explanation of how to keep the channel clear).
3) Crisper drawer and cover
o The crisper drawer is in the bottom of your refrigerator and there
is a cover that goes over it.
o The cover helps to prevent fruit and vegetables from drying out
prematurely.
4) Butter compartment
o The butter compartment should only be used for storing packs of
butter or margarine.
: Lift the shelf and pull it towards you (1) until
9
5) Bottle shelf
o The lower shelf should be used for storing reasonably sized
bottles.
IMPORTANT: IT IS IMPORTANT THAT NONE OF THE SHELVES
THAT SIT IN THE DOOR ARE OVERLOADED, AS THIS WILL
DRASTICALLY REDUCE THEIR WORKING LIFE.
Using your Baumatic larder fridge
Before switching on
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the refrigerator
reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food in the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance with the thermostat or
connecting it to your mains supply.
10
Turning on the appliance and setting the thermostat
You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat control dial is located on
the upper right hand side of the fridge interior. The control knob
should be rotated in a clockwise direction.
o The thermostat automatically regulates the temperature inside of
the fridge, depending on what number you have turned the
thermostat control knob to:-
o Position <0> means that the appliance will not cool. However
the light will still function.
o Position <1> will give you a higher temperature inside of the
fridge.
o Position <7> will give you a lower temperature inside of the
fridge.
o Ideally the thermostat should be set to a position of between
<3> to <4>.
o Your refrigerator can maintain a temperature of between 4 – 6
degrees centigrade.
o IMPORTANT: The ambient temperature of the room,
the temperature of the food and the amount of food that
has been placed in the appliance and how often the door
is opened, will all affect the temperature being
maintained by the appliance.
o On the maximum setting (position <7>), your fridge will work
harder to maintain a lower temperature and will increase the
energy usage. There is no need to run your appliance on this
setting for prolonged periods and you should return the
thermostat knob to position <3> or <4>.
o IMPORTANT: Do not run the appliance with the thermostat
above number 5 in normal usage otherwise the defrost drainage
hole will freeze.
11
Loading...