NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference. for
you or any person not familiar with the operation of the appliance.
JW 11/01/13
2
Contents
Environmental note 4
Important safety information 5 – 6
Specifications of your freezer 7 – 8
Dimensions 7
Description of the appliance 8
Using your Baumatic freezer 9 -11
Before switching on 9
During first use 9
Switching on the appliance and setting the thermostat 10
Control Panel 11
The freezer compartment 11-14
Tips on freezing 12
Making ice cubes 12
Freezing fresh food with fast freeze 13
Saving energy when using your freezer 13-14
Cleaning and maintenance 15-16
Defrosting the freezer compartment 15-16
Installation 17-25
Electrical connection 17-18
Positioning 18
Reversing the door of your appliance 19-20
Aperture dimensions 21
Adjusting the plinth/kickboard 21-22
Fitting the furniture door to the appliance 23-26
: Before discarding an old appliance, switch off and
disconnect it from the power supply. Cut off and render any plug
useless. Cut the cable off directly behind the appliance to prevent
misuse. This should be undertaken by a competent person. Disable
the door lock to make sure that children cannot get stuck inside
the appliance.
4
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Advice Line.
IMPORTANT: Any installation work must be carried
out by a qualified electrician or competent person.
Use of the appliance
o Your appliance is only designed to be used in the
home. It is suitable for freezing and storing frozen
food. If it is used for any other purpose or it is not
used correctly, then Baumatic Ltd. will accept no
liability for any damage that might be caused.
o Altering the specification of the appliance must not be attempted
for reasons of safety.
Before using your appliance
o Check the appliance for any signs of transport damage. If you
notice any damage, then you should not connect your appliance
to your mains supply and should contact your supplier.
Refrigerant
o Your appliance contains R600a refrigerant, which is a natural gas
that does not contain CFCs that can damage the environment.
However it is a flammable substance, therefore care should be
taken:
During the transportation and installation of the
appliance, make sure that the refrigeration pipework
does not get damaged.
If it does become damaged then sources of ignition
and open flames should be avoided. Also the room
that the appliance is situated in should be thoroughly
ventilated.
o Do not place any objects on top of the appliance,
as this may damage the table top.
5
Child safety
o Packaging material should be kept away from
children.
o Children should not be allowed to touch the
controls or play with the appliance.
General safety
o Do not pull on the power supply cable to remove the plug from
your mains supply socket.
o Do not pull out or insert the plug with wet hands.
o Do not attempt to use your appliance outdoors or
any place where it is likely to come into contact with
the elements.
o Before cleaning the appliance or performing maintenance work,
ensure that the appliance has been disconnected from your
mains supply.
o Never allow the back coils of the appliance to come into contact
with the wall surface.
o Always ensure that the location where you are installing your
appliance is free of stored items such as papers and other
flammable materials.
o Never block the ventilation openings of the appliance, either on
the inside or its exterior.
o It is vital to keep your appliance well ventilated,
so that there is proper air flow between the
bottom of the unit and the plinth/kick plate which
it is sitting on.
o Do not place electrical devices inside of the appliance, such as
mixers and electric ice cream makers.
Service
You should not attempt to repair the appliance
yourself, as this could cause injury or a more serious
malfunction. If you require a service call then please
contact the Customer Care Department.
6
Specifications of your freezer
Dimensions of appliance Dimensions of aperture*
Height: 818 - 870 mm
Width: 596 mm
Depth: 550 mm
o Freezer star rating ****
o Manual defrost
o Adjustable thermostat
o Temperature rise warning indicator
o Fast freeze switch
o Fast freeze indicator light
o 3 Transparent freezer drawers
o Reversible door
o Door on door fittings
o Adjustable feet
o Ice cube tray
Cubic capacities
o Gross capacity: 102 litres
o Net capacity: 100 litres
Energy efficiency class
Energy class: A+
Height: 820 – 870 mm
Width: 600 mm
Depth: 600 mm (min)
7
IMPORTANT: When you install your appliance it is important to bear
in mind its climatic rating.
In order to find out the climatic rating of your appliance, you should
check the rating plate. The rating plate is located on the front left edge
of the inside of the fridge. You will need to open the door of your
appliance to be able to find it.
The rating plate will indicate the ambient temperature range that your
appliance will function correctly within.
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Description of the appliance
NOTE: Image is for reference only and may slightly differ from
your product.
8
Using your Baumatic freezer
Before switching on
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o You should set the thermostat dial to its maximum setting for 24
hours after switching on the appliance for the first time.
o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the freezer
reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o You should then adjust the thermostat dial down to its normal
operating position.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
9
Switching on the appliance and setting the thermostat
You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat control knob is located at
the top of the appliance.
o The thermostat automatically regulates the temperature inside the
freezer, depending on what number you have turned the
thermostat control knob to:-
o Position <0> means that the appliance will not cool. However the
light will still function.
o Position <1> will give you a higher temperature inside the freezer.
o Position <5> will give you a lower temperature inside the freezer.
o Ideally the thermostat should be set to position between <3>.
o The freezer can cool down to -18 degrees centigrade and lower.
o IMPORTANT: The ambient temperature of the room, the
temperature of food and the amount of food that has been
placed in the appliance and how often the door is opened,
will all affect the temperature being maintained by the
appliance.
o On the maximum setting (position <5>), your freezer will work
harder to maintain a lower temperature and will increase the
energy usage. There is no need to run your appliance on this
setting for prolonged periods.
10
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.