Baumatic BR105 User Manual

BR105, 142 Litres
Built-under
larder fridge
33U d
USER MANUAL FOR YOUR BAUMATIC
BR105, 142 Litres
Built-under
larder fridge
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference. for you or any person not familiar with the operation of the appliance.
JW 07/01/13
2
Contents
Environmental note 4 Important safety information 5 – 6 Specifications of your larder fridge 7 – 10
Dimensions 7 Description of the appliance 8 Description of the product features 9 - 10
Using your Baumatic larder fridge 10 - 12 Before switching on 10 During first use 10 - 11 Switching on the appliance and setting the thermostat 11 - 12
Arranging and storing food in your refrigerator 12 – 13 Saving energy when using your refrigerator 13 - 14 Cleaning and maintenance 14 - 16
The defrost drain hole 15 Replacing the light bulb 16
Installation 16 - 26 Electrical connection 17 Positioning 18 Reversing the door of your appliance 18 - 20 Aperture dimensions 21 Adjusting the plinth/kickboard 21 22 Fitting the furniture door to the appliance 22 - 26
Troubleshooting 26 – 28 Baumatic consumables 29 Technical data 30 Contact details 31
3
Environmental note
Note
: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.
4
Important safety information
Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact Customer Care.
IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person.
Use of the appliance
o Your appliance is only designed to be used in the
home. It is suitable for storing food that needs to be chilled and refrigerated. If it is used for any other purpose or it is not used correctly, then Baumatic Ltd. will accept no liability for any damage that might be caused.
o Altering the specification of the appliance must not be attempted
for reasons of safety.
Before using your appliance
o Check the appliance for any signs of transport damage. If you
notice any damage, then you should not connect your appliance to your mains supply and should contact your supplier.
Refrigerant
o Your appliance contains R600a refrigerant, which is a natural gas
that does not contain CFCs that can damage the environment. However it is a flammable substance, therefore care should be taken:
During the transportation and installation of the
appliance, make sure that the refrigeration pipework does not get damaged.
If it does become damaged then sources of ignition
and open flames should be avoided. Also the room that the appliance is situated in should be thoroughly ventilated.
o Do not place any objects on top of the appliance,
as this may damage the table top.
5
Child safety
o Packaging material should be kept away from
children.
o Children should not be allowed to touch the
controls or play with the appliance.
General safety
o Do not pull on the power supply cable to remove the plug from
your mains supply socket.
o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any
place where it is likely to come into contact with the elements.
o Before cleaning the appliance or performing maintenance work,
ensure that the appliance has been disconnected from your mains supply.
o Never allow the back coils of the appliance to come into contact
with the wall surface.
o Always ensure that the location where you are installing your
appliance is free of stored items such as papers and other flammable materials.
o Never block the ventilation openings of the appliance, either on
the inside or its exterior.
o It is vital to keep your appliance well ventilated, so
that there is proper air flow between the bottom of the unit and the plinth/kick plate which it is sitting on.
o Do not place electrical devices inside of the appliance, such as
mixers and electric ice cream makers.
Service
You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Customer Care Department.
6
Specifications of your larder fridge
Dimensions of appliance Dimensions o
f aperture*
Height: 818 - 870 mm Height: 820 – 870 mm Width: 596 mm Width: 600 mm Depth: 550 mm Depth: 600 mm (min)
o Automatic fridge defrost o Adjustable thermostat o 3 Safety glass shelves o 2 Salad crispers o Bottle rack o Egg rack o Reversible door o Door on door fittings o Adjustable feet
Cubic capacities
o Gross capacity: 142 litres o Net capacity: 140 litres
Energy efficiency class
Energy class: A+
7
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating.
In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the front left edge of the inside of the fridge. You will need to open the door of your appliance to be able to find it.
The rating plate will indicate the ambient temperature range that your appliance will function correctly within.
For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
Model Number ………………………………. Serial Number ………………………………. Date of Purchase ……………………………….
Description of the appliance
NOTE:
Image is for reference only and may differ from your product.
8
Description of the product features
1) Shelves
o The shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
o To remove a shelf: Take off all of the items that are stored on the
shelf that you want to remove. Then lift the front of the shelf and carefully pull it out of the grooves.
2) Defrost water outlet
o The interior of the refrigerator is cooled by
the cooling plate that is on the rear wall. Beneath this there is a channel and an outlet for the defrost water.
o It is important that this channel never becomes clogged (see “The
defrost drain hole” section for a detailed explanation of how to keep the channel clear).
3) Crisper (salad) drawers and cover
o The crisper drawers are in the bottom of your refrigerator and there
is a cover that goes over them.
o The cover helps to prevent fruit and vegetables from drying out
prematurely.
4) Dairy shelf (door rack)
o The dairy shelf is suitable for storing eggs, cheese and yogurt. As
well as smaller packages, tubes, cans etc.
5) Bottle shelf (bottle door rack)
o The lower shelf should be used for storing reasonably sized bottles.
IMPORTANT: IT IS IMPORTANT THAT NONE OF THE SHELVES THAT SIT IN THE DOOR ARE OVERLOADED, AS THIS WILL DRASTICALLY REDUCE THEIR WORKING LIFE.
9
Using your Baumatic larder fridge
Before switching on
o Make sure that it has been installed by a suitably qualified person,
as per the information contained in Baumatic’s installation instructions.
o After delivery, wait for eight hours before connecting the appliance
to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid detergent and water.
o The interior of the appliance should be cleaned with
a solution of sodium bicarbonate dissolved in lukewarm water. The interior and accessories should be thoroughly dried, after the cleaning process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o You should set the thermostat dial to its maximum setting for 24
hours after switching on the appliance for the first time.
o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge freezer reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o You should then adjust the thermostat dial down to its normal
operating position.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or connecting it to your mains supply.
10
Loading...
+ 22 hidden pages