Baumatic B906.6SS, BO796.6SS, BO796.6BL User Manual

B906.6SS
BO796.6SS
BO796.6BL

Feature List

Note: Please refer to the Installation and Maintenance
manual which accompanies this user manual for important
instructions regarding the correct installation and
maintenance of your oven and important safety instructions.

3

ENGLISH

Top cavity

1 Temperature selector.

2 Heating indicator light. Indicates that the heat

is going to the food and it goes out when the
set temperature is reached.

3 Function selector.

Main cavity

4 Electronic clock.

5 Function selector.

6 Heating indicator light.

7 Temperature selector.

8 Fan oven + temperature selector.

Model BO796.6 SS/BO796.6 BL

Model B906.6 SS

Control Panel

Oven Functions

09:05

32 1 4 8 6

09:05

1 2 3 4 5 76

Model B906.6 SS

Top cavity: ////

Main cavity: ////

Model BO796.6 SS/BO796.6 BL

Top cavity: ////

Main cavity:

Switch off oven

Conventional

It is used for sponges and cakes where the heat
received must be uniform to achieve a spongy
texture.

Lower Element

Heats only from beneath. Suitable for heating
dishes and raising pastry and similar.

MaxiGrill

Allows greater surfaces to be prepared, than
with the grill, together with higher power
reducing the time required for browning of the
food.

Grill

For preparing dishes with superficial roasting. It
allows the outer layer to be browned without
affecting the inside of the food. Ideal for flat
food, such as steaks, ribs, fish, toast.

Grill with fan

Allows uniform roasting at the same time as
surface browning. Ideal for grills. Special for
large volume pieces, such as poultry, game etc.
It is recommended to put the item on a rack
with a tray beneath to collect the stock and
juices.

Caution

While using the Grill, MaxiGrill or Grill with fan
the door must be kept closed.

Turbo

The fan distributes the heat produced by an
element located at the rear of the oven. Due to
the uniform heat distribution, it allows roasting
and baking to take place on two levels at the
same time.

Defrosting

This cooking mode is suitable for gentle
defrosting of delicate food to be consumed
unheated, e.g.: cream, custard, pastry, tarts,
cakes, fruit,...

Note

The pilot light remains on in any cooking
function.

Model B906.6 SS

Setting the time on the clock

On connecting the oven, you will notice that
12:00 appears on the clock and that a light
begins to flash above the symbol. Pressing
the “+” and “-“ buttons the correct time can be
set on the clock, which is subsequently stored
and the flashing light goes out.

Manual use

After setting the correct time, the oven is ready
for use. Select a temperature and a cooking
function.

To switch off the oven, set the controls to the
position .

Functions of the Electronic Clock Programmer

Warning function: This function generates a

warning tone at a specified time.

Cooking time: This function allows to
programme the oven to cook for a specified
time, after which it will switch itself off.

End of cooking time: This function allows to
establish the exact hour, after which the oven
will switch itself off.

Duration and automatic stop: This function is
used to control the duration and the time at
which the oven will turn itself off. This function
allows the oven to start and stop automatically.

Warning function

1 Press the MODE button until the signal above

the symbol begins to flash.

2 Choose the time when you want the alarm to

sound, pressing the “+” or “-“ buttons.

3 Subsequently, the light will remain on

indicating that the alarm is programmed.

4 At the end of the programmed time, an alarm

will sound and the light will begin to flash.

5 Press any button to turn off the alarm and the

screen shows the current time again.

Use of the Oven

4

5

ENGLISH

Programming the cooking time

1 Press the MODE button until the indicator

above the symbol begins to flash.

2 Select the length of time, pressing the “+” or

“-“ buttons.

3 Subsequently, the indicator that was flashing

will light, indicating that the oven will switch
itself off automatically.

4 The clock will then show the current time.

5 Select a temperature and cooking function.

6 When the set time has elapsed, the oven will

disconnect, an alarm will sound and the
indicator will begin to flash.

7 Press any button to switch off the alarm,

reconnecting the oven.

8 Set the controls in the position to switch off

the oven.

Programming the end of cooking time for the
oven

1 Press the MODE button until the indicator

above the symbol begins to flash.

2 Select the time that cooking is to finish,

pressing the “+” or “-“ buttons.

3 Subsequently, the indicator that was flashing

is lit, indicating that the oven will switch itself
off automatically.

4 The clock will then show the current time.

5 Select a temperature and a cooking function.

6 When the programmed time is reached, the

oven will disconnect, an alarm will sound and
the indicator will begin to flash.

7 Press any button to switch off the alarm and

the oven will reconnect.

8 Set the controls to the position to switch off

the oven.

This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.

Programming the duration and automatic stop

1 Press the MODE button until the indicator

above the symbol begins to flash.

2 Select the length of cooking time pressing

the “+” or “-“ buttons.

3 Subsequently, the indicator that was

flashing will remain lit.

4 Press the mode button until the indicator

above the symbol begins to flash.

5 Select the time that cooking should finish

pressing the “+” or “-“ buttons.

6 Subsequently, the indicator that was

flashing will remain lit.

7 Select a function and cooking temperature.

8 The oven will remain disconnected with the

indicators above the and symbols
lit. Your oven is programmed.

9 When the time to begin cooking is reached,

the oven will switch itself on and will
continue cooking during the programmed
time.

10

When the programmed finishing time is
reached, the oven will disconnect, an alarm
will sound and the light above the
symbol will begin to flash.

11

Press any button to switch off the alarm and
the oven will reconnect.

12

Set the controls to the position to switch
of the oven.

Caution

Pressing the MODE button the display on the
screen shows any function programmed. It can
be changed by pressing the “+” or “-“ buttons.
On selecting the desired function, the indicator
above the corresponding signal will light.

In the event of a power cut, all the programming
of the electronic clock will be erased. The
correct time has to be reset and the watch
reprogrammed.

09:05

6

Model BO796.6 SS/BO796.6 BL

Setting the Time on the Clock

On connecting the oven you will notice that day­time flashes on the display, starting from 0:00
and the auto symbol A flashes.

Press the “+” and “-” buttons simultaneously
and then pressing the “+” or “-” buttons the cor­rect time can be set on the display.

Manual Use

After setting the correct time, the oven is ready
for use. The symbol is illuminated on the dis­play. Select a temperature and a cooking func­tion.

To switch off the oven, set the controls to the
position.

Warning Function

This function generates a buzzer interval alarm
signal at a specified time.

1 Press the MODE button until the symbol

begins to flash.

2 Choose the time when you want the alarm to

sound, pressing the “+” or “-” buttons.

3 Subsequently, the symbol will remain on

indicating that the alarm is programmed.

4 At the end of the programmed time, an

acoustic interval signal will sound and the
symbol will begin to flash.

5 Press any button to turn off the acoustic

signal.

The buzzer signal frequency can be changed by
MINUS in 3 circular steps. For listening to the
actual valid signal, press “-” button for some sec­onds while the display reads the time of the day.
Every new key press within the time window
changes the buzzer signal. Now this tone is valid
as program end alarm signal.

Use of the Oven

Programming the Cooking Time

This function allows to programme the oven to
cook for a specified time, after which it will
switch itself off.

1 Press the MODE button until the display

automatically switches over between “dur”
display and duration time setting mode. The
symbol A is flashing.

2 Select the duration, pressing the “+” or “-”

buttons.

3 Subsequently, the symbol A that was flashing

will light, indicating that the oven will switch
itself off automatically.

4 The display will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed the oven will

disconnect, the symbol will switch off, an
acoustic interval signal will sound and the
symbol A will begin to flash.

7 Press any button to switch off the acoustic

signal, reconnecting the oven.

8 Set the controls in the position to switch off

the oven.

Programming the End of Cooking Time for the
Oven

This function allows to establish the exact hour,
after which the oven will switch itself off.

1 Press the MODE button until the display

automatically switches over between “End”
display and end time setting mode. The
symbol A is flashing.

2 Select the time that cooking is to finish,

pressing the “+” or “-” buttons.

3 Subsequently, the symbol A that was flashing

will light, indicating that the oven will switch
itself off automatically.

4 The display will then show the current time.
5 Select a temperature and cooking function.
6 When the programmed time is reached the

oven will disconnect, the symbol will
switch off, an acoustic interval signal will
sound and the symbol A will begin to flash.

7 Press any button to switch off the acoustic

signal and the oven will reconnect.

7

ENGLISH

8 Set the controls to the position to switch off

the oven.

This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.

Programming the Duration and Automatic Stop

This function is used to control the duration and
the time at which the oven will turn itself off. This
function allows the oven to start and stop auto­matically.

1 Press the MODE button until the display

automatically switches over between “dur”
display and duration time setting mode. The
symbol A is flashing.

2 Select the duration, pressing the “+” or “-”

buttons.

3 Subsequently, the symbol A that was flashing

will light, indicating that the oven will switch
itself off automatically.

4 Press the MODE button until the display

automatically switches over between “End”
display and end time setting mode. The
symbol A is flashing.

5 Select the time that cooking is to finish,

pressing the “+” or “-” buttons.

6 Subsequently, the symbol A that was flashing

will light, the symbol will switch off and
the oven will remain disconnected. Your oven
is programmed.

7 Select a function and cooking temperature.
8 When the time to begin cooking is reached, the

oven will switch itself on and will continue
cooking during the programmed time.

9 When the programmed finishing time is

reached, the oven will disconnect, an
acoustic interval signal will sound and the
symbol A will begin to flash.

10

Press any button to switch off the acoustic

signal and the oven will reconnect.

11

Set the controls to the position to switch

of the oven.

Caution

Pressing the MODE button the display on the
screen shows any function programmed. It can
be changed by pressing the “+” or “-“ buttons.

Program times for automatic programs can be
cleared by pressing “+” and “-” simultaneously.
For clearing warning function, first you must be
select the warning function in the display.

09 · 05

8

Tray Handle

The tray handle is used when you need to remove the tray to check the food. See figures. To lift the
tray out of the oven, you need to use gloves to protect yourself.

Cake tray handle position. You must put the
short hook over the tray.

Short hook

Long hook

Roasting tray handle position. You must put the
long hook over the tray.

ENGLISH

Energy
efficiency
class on a
scale of A
(more efficient)
to G (less
efficient).

Heating
function.

Conventional.

Forced air
convection.

Energy
consumption.

Conventional.

Forced air
convection.

Usable volume
(litres).

Size:

Small
Medium
Large

Time to cook
standard load.

Conventional.

Forced air
convection.

Baking area.

Noise (dB (A)
re 1 pW).

A

- - -

0,79
Kwh

59

- - - -

43 min.

1300 cm

2

- - -

A

- - -

0,68
Kwh

40

- - - -

39 min.

1300 cm

2

- - -

BROCHURE

Manufacturer BAUMATIC BAUMATIC

Model B906.6 B796.6

United Kingdom

Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom

Sales Telephone

[phone]

Sales Fax

[phone]

Customer Care Telephone

[phone]

Customer Care Fax

[phone]

Spares Telephone

[phone]

Advice Line Telephone

[phone]

E-mail:

[e-mail]
[e-mail]
[e-mail]
[e-mail]

Website:

www.baumatic.co.uk

Facebook:

www.facebook.com/baumatic.uk

Republic of Ireland

Service Telephone

1-890 812 724

Spares Telephone

091 756 771

Czech Republic

Baumatic CR spol s.r.o.
Lípovà 665
460 01 Liberec 4
Czech Republic

[phone]
www.baumatic.cz

Slovakia

Baumatic Slovakia, s.r.o.
Panenská 34
811 03 Bratislava - Staré Mesto
Slovakia

[phone]
www.baumatic.sk

Germany

Baumatic Gmbh
Bachstr.10-12
D-32 257 Bu¨nde
Deutschland

[phone]
www.baumatic.de

Italy

Baumatic Italia S.R.L.
Via Galvani N.3
35011 Campodarsego (PD)

[phone]
www.baumatic.it

Holland

Baumatic Benelux B.V.
Dukdalfweg 15d
1332 BH ALMERE
Nederland

[phone]
www.baumatic.n

Our contribution to enviromental protection: we use recycled paper.

Cod.: 3172657-000