Baumatic BFD47SS Instruction Manual

BFD47SS

DISHWASHER

BAUMATIC

INSTRUCTION MANUAL

CAREFULLY READING IT BEFORE USING THE DISHWASHER WILL HELP

YOU

USE AND MAINTAIN THE DISHWASHER PROPERLY.

IMPORTANT!

PLEASE READ THIS MANUAL AND KEEP IT FOR FUTURE REFERENCE!

THIS MANUAL CONTAINS SECTIONS OF SAFETY INSTRUCTIONS,

OPERATING

INSTRUCTIONS

&

TROUBLESHOOTING TIPS,

ETC.

DD 02/11/07

BFD47SS DISHWASHER

45CM FULL HEIGHT DISHWASHER

MINIMUM AND MAXIMUM PLATE SIZES....2

9

ENVIRONMENTAL NOTE………………………..3

1

HOW TO INSTALL ……….…….…..……....23-2

8

FINAL CHECKLIST BEFORE STARTING…….2

8

BAUMATIC BFD47SS dishwasher user manual

2

FROM PROFESSIONAL

NOTICE.

2

PLEASE NOTE:

THE MANUFACTURER
RESERVES THE RIGHT TO MAKE
MODIFICATIONS

TO

PRODUCTS

WITHOUT

GIVING PRIOR

BEFORE CALLING

FOR

SERVICE

REVIEWING THE SECTION ON
TROUBLESHOOTING

TIPS WILL

HELP

YOU SOLVE SOME

COMMON

PROBLEMS WITHOUT

THE

NEED TO ASK FOR HELP

TECHNICIANS.

CONTENTS

• SAFETY FIRST!

SAFETY INFORMATION .……………..…………3

*Please read this before using your dishwasher!

• KNOWING YOUR

DISHWASHER

CONTROL PANEL ………………………..……..…4
DISHWASHER FEATURES …………..………….4

• USING YOUR

DISHWASHER

WATER SOFTENER …………………..………...5-6

DETERGENT ………………..............................6

RINSE AID ………………….............. ...............7

LOADING YOUR DISHWASHER…..….......8-11

STARTING A WASH CYCLE ……………….12-14

UNLOADING AT THE END OF A CYCLE…....14

FILTERING SYSTEM ………………..…….…….15
CLEANING AND MAINTAINING
YOUR DISHWASHER …………………….…15-17

• BEFORE YOU CALL FOR

SERVICE…

TROUBLESHOOTING

………………….…18-21

ERROR CODES

……………….……………….…22

•

MISCELLANEOUS

CHARACTERISTICS ………….………….……...2

2

IN YOUR DISHWASHER. PLEASE SEE PAGE 8 FOR A LIST

DO NOT TAMPER WITH THE CONTROLS.

AFTER USE

ALWAYS KEEP THE DOOR CLOSED TO AVOID DANGER

2) Load sharp knives with the handles up to prevent

•

•

CHECK THAT THE DETERGENT DISPENSER IS EMPTY

DETERGENT, NOT SOAP OR LAUNDRY DETERGENT.

•

IF LEAVING UNUSED FOR A LONG TIME,

EXPLOSION!

BAUMATIC BFD47SS dishwasher user manual

3

IMPORTANT SAFETY INFORMATION

READ

BEFORE USING!

•

KEEP CHILDREN AWAY FROM DETERGENT,

DISHWASHER AS THERE COULD BE

•

SUPERVISE YOUNG CHILDREN TO ENSURE

BEFORE USING

SOME ITEMS ARE UNSUITABLE FOR WASHING

OF THESE ITEMS.

WHEN LOADING ITEMS TO BE WASHED:

1) Keep sharp items like knives away from the door
seal.

injuries.

ONLY USE AUTOMATIC DISHWASHER

OF TRIPPING.

NEVER USE SOLVENTS AS THIS COULD RESULT IN AN

AFTER COMPLETION OF WASH CYCLE.

DISCONNECT THE WATER SUPPLY (SEE PP. 17, 26).

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY BEFORE

USING

YOUR DISHWASHER FOR THE FIRST TIME!

3

DURING USE

CHILD SAFETY

•

DO NOT ABUSE OR FORCE THE
DISHWASHER.

DO

NOT SIT ON OR STAND

ON

ITS DOOR OR DISH RACKS – TIPPING

HAZARD.

RINSE AID AND THE OPEN DOOR OF THE

DETERGENT LEFT INSIDE.

THEY DO NOT PLAY WITH THE APPLIANCE.

•

SUPERVISE INFIRM PERSONS IF THEY MUST

USE

THE APPLIANCE.

•

REMOVE THE DOOR TO WASHING
COMPARTMENT

OF

YOUR OLD APPLIANCE

BEFORE DISCARDING IT.

ELECTRICAL SAFETY

• NOTE - This appliance must be grounded. In

the event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least resistance
of electrical current. You will be able to tell if
it is because a non-grounded appliance will
give off an electrical discharge.

• Manufacturer declines all responsibility for

any damage due to non-grounding of
appliance.

• DURING THE GUARANTEE PERIOD ONLY BAUMATIC

SERVICE ENGINEERS OR AN AUTHORISED AGENT
OF BAUMATIC SHOULD CARRY OUT REPAIRS ON
THIS UNIT.

• DO NOT USE IF THE SUPPLY CORD IS DAMAGED.

• FOR INSTALLATION PROCEDURE PLEASE CONSULT

PAGES 24 – 29.

•

DO NOT USE YOUR DISHWASHER UNLESS
ALL

ENCLOSURE PANELS ARE PROPERLY

IN

PLACE. OPEN THE DOOR VERY

CAREFULLY

IF

THE DISHWASHER IS

OPERATING.

THERE IS A RISK OF WATER

SQUIRTING

OUT.

•

DO NOT TOUCH THE HEATING ELEMENT
DURING OR IMMEDIATELY AFTER USE.

(ADJUSTABLE)

8 CUTLERY BASKET

4 WATER SOFTENER

BAUMATIC BFD47SS dishwasher user manual

4

CONTROL PANEL

1)

Display window – Program remaining time, delay time, running indicator, water temperature, fault
codes, etc.

2)

Program indicator light.

3)

Start / Pause Button: Press this button to start or stop the dishwasher. The light will come on when
starting.

4)

Program Knob: Turn around the knob to choose the desired program.

5)

Door Lock: Pull it to open the door.

6)

Rinse Aid Warning light: Add more rinse aid as the indicator on the front panel lights up.

7)

Salt Warning Light: Add more salt as the indicator on the front panel lights up.

8)

Delayed Start Button: Press this button to set the time you want to start a washing cycle. Each
press adds 30 minutes to the delayed start time. You can set it up to 12 hours into the future.

9)

Power Switch: Turns the power supply ON / OFF.

10) Power On Indicator Light: Comes on when the appliance is turned on.

DISHWASHER FEATURES

1 ADJUSTABLE UPPER BASKET

5 MAIN FILTER

9 COARSE FILTER

2 SPRAY ARMS

6 DETERGENT DISPENSER

10

RINSE AID DISPENSER

3 LOWER BASKET

7 CUP & GLASS SHELF

11

DRAIN PIPE CONNECTOR

12

INLET PIPE CONNECTOR

4

DISHWASHER.

SURE NOT TO ADD SALT AND/OR RINSE AID
TO

THE APPLIANCE AS THESE TABLET

MINERALS FROM THE WATER

.

INDIVI

DUAL

CHEMICALS AND MAY

CAU

SE

BAUMATIC BFD47SS dishwasher user manual

5

Note

used by the dishwasher on chemicals

•

Your dishwasher is equipped with an adjustable rinse aid and salt container. Using individual detergents,

rinse

aid and salt will give the best possible results as this will give the correct dosage of each chemical to

suit

your needs.

Using Two-in-One or Three-in-One tablets may not give the best results when used in

your

appliance, and may not be suitable for the type of water supply in your home, as they contain pre-

determined

quantities

of

salt,

rinse

aid

and

detergent

and

cannot

be

adjusted

to

the

individual

requirements.

If you are going to use 3-in-1 (or 2-in-1) tablets, we suggest that you contact the manufacturer before use

or if you experience poor results in the wash performance and ask for assistance from them.

WARNING!

ONLY USE DISHWASHER SALT IN YOUR

NOTE:

IF YOU USE 3-IN-1 OR 2-IN-1 TABLETS, BE

TYPES ALREADY CONTAIN SALT AND/OR

THE LIME IN HARD WATER MAKES DEPOSITS FORM ON

RINSE AID. A

DDING SALT AND R

INSE AID

DISHES AND UTENSILS. YOUR DISHWASHER HAS A

TO YOUR DISHWASHER’S COMPARTMENTS

SPECIAL SOFTENING FEATURE THAT USES SALT

IN A CYCLE INVOLVING A 3-I

N-1 OR

2-IN-1

SPECIFICALLY DESIGNED TO ELIMINATE LIME AND

TABLET WILL RESULT IN

OVERDOSING OF

OVERFLOWING OF WATER AND SUDS.

LOADING SALT INTO THE SALT CONTAINER

• REMOVE THE LOWER BASKET & THEN

UNSCREW

AND REMOVE THE CAP

FROM THE SALT CONTAINER.

• IF YOU ARE FILLING THE CONTAINER

FOR THE FIRST TIME, ,FILL 2/3 OF IT’S
VOLUME WITH WATER
(AROUND500ML).

• PLACE THE END OF THE SUPPLIED

FUNNEL INTO THE HOLE & ADD 1.2 Kg
OF SALT. NOTE: IT IS NORMAL FOR A
SMALL AMOUNT OF WATER TO COME
OUT OF THE CONTAINER.

• USUALLY:THE WARNING LIGHT WILL

BE OFF IN 2-6 DAYS AFTER THE SALT
CONTAINER BE FILLED WITH SALT.

5

WATER

SOFTENING

FEATURE

BAUMATIC BFD47SS dishwasher user manual

6

SETTING THE WATER SOFTENER LEVEL

YOU CAN ADJUST THE AMOUNT OF SALT USED BY THE DISHWASHER TO SOFTEN WATER TO GET
THE BEST WASHING RESULTS, BASED ON THE HARDNESS OF WATER IN YOUR AREA.

2 THERE IS A RING ON THE NECK OF THE

CONTAINER.

ROTATE THE RING IN AN

ANTICLOCKWISE

DIRECTION FROM THE “-”

SETTING

TOWARDS THE “+” SETTING

ACCORDING

TO

THE HARDNESS OF WATER

IN

USE.

SEE TABLE BELOW.

NOTE

1. THE SALT CONTAINER MUST BE REFILLED WHEN THE
SALT

WARNING LIGHT COMES ON. ALTHOUGH THE
SALT CONTAINER MAY BE FULL, THE INDICATOR LIGHT
MAY

NOT GO OUT UNTIL THE SALT HAS DISSOLVED.

1 UNSCREW THE CAP FROM THE SALT

CONTAINER.

DJUSTMENTS SHOULD BE MADE ACCORDING TO THE TABLE BELOW:

2. IF THERE ARE SALT SPILLS, A SOAK PROGRAM CAN
BE

RUN TO WASH AWAY SPILLAGE BEFORE USING THE

MACHINE.

3. CLEAR ANY SALT GRANULES AWAY FROM THE
CONTAINER OPENING.

A

WA TE R H ARDN ESS

(c ycles/ 1 .2kg s)

Au to no my

Salt con sum pti on

Sel ect or Positi o n

(g ra m/cycl e)

Cl arke Degrees

mmol /l

dH

/

0~ 14

0~ 18

0~ 1. 8

0

/

-

14 ~3 6

18~44

1. 8~ 4.4

20

60

36~ 71

44 ~8 9

4. 4~ 8.9

M E D

40

30

+

71

89

8. 9

60

20

C

onta ct your l oca l wa ter boa rd for i

nfor ma ti on on the ha rdne ss of your w ate r suppl y.

DETERGENT

“

How much do I use?”

To OPEN the DETERGENT DISPENSER DOOR, use the CATCH on its LOWER SIDE.

*NOTE: SEE P.13 – WASH CYCLE TABLE for AMOUNT of DETERGENT to use.

NOTE:

• ALWAYS CHECK THE WASH CYCLE TABLE

FOR DOSAGE ADVICE. NEVER OVERFILL
THE DISPENSER.

• DO NOT OVERDOSE TO PREVENT THE

FORMATION OF DEPOSITS (THE WATER
SOFTENING FEATURE ALREADY TAKES CARE

OF THIS!).
THE HARDER YOUR WATER, THE MORE DETERGENT
YOU MAY NEED. ADJUST THE DOSE JUST BY SMALL
AMOUNTS

UNTIL YOU FIND THE CORRECT AMOUNT

OF DETERGENT TO USE.

6

BAUMATIC BFD47SS dishwasher user manual

FORMING DROPLETS ON YOUR DISHES

THAT CAN CAUSE SPOTS AND STREAKS. IT

THE ‘OPEN’ (LEFT) ARROW AND LIFT IT OUT.

THE CAP BEFORE YOU CLOSE THE

(RIGHT) ARROW.

7

• THE RINSE AID IS RELEASED DURING THE

FINAL RINSE TO PREVENT WATER FROM

RINSE AID

ALSO IMPROVES DRYING BY ALLOWING

WATER TO FALL OFF THE DISHES.

• YOUR DISHWASHER IS DESIGNED TO USE

LIQUID RINSE AIDS. THE RINSE AID

DISPENSER CAN BE FOUND INSIDE THE

DOOR NEXT TO THE DETERGENT

DISPENSER. TO FILL THE DISPENSER, OPEN

THE CAP AND POUR THE RINSE AID INTO

THE DISPENSER UNTIL THE LEVEL

INDICATOR TURNS COMPLETELY BLACK.

THE DISPENSER HOLDS ABOUT 100ML OF

LIQUID RINSE AID.

• BE CAREFUL NOT TO OVERFILL THE

DISPENSER – THIS COULD CAUSE

FROTHING. WIPE AWAY SPILLS WITH A

• TO OPEN THE DISPENSER, TURN THE CAP TO

DAMP CLOTH. DON’T FORGET TO REPLACE

• POUR THE RINSE AID INTO THE DISPENSER.

DISHWASHER DOOR.

BE CAREFUL NOT TO OVERFILL.

NOTE: IF

YOU HAVE SOFT WATER, YOU MAY NOT

• REPLACE CAP BY INSERTING IT ALIGNED WITH

NEED RINSE AID FOR IT MAY CAUSE A WHITE FILM

‘OPEN’ ARROW & TURN IT TO THE CLOSED

TO DEVELOP ON YOUR DISHES.

ADJUSTING THE RINSE AID DISPENSER

As with detergent, the amount of rinse

ai

d needed

for your di

shes depends on

the

hardness of the w

ater in

your area.

Too much rinse aid can result in

foaming

and cause cloudiness or

streaks

on

your di

shes. If

your wat

er

is

very soft, you may not

need rinse

aid.

You can always dilute the rinse

aid

with an

equal amount of

water.

The rinse aid dispenser has six settings. ALWAYS START WITH THE DISPENSER SET ON “1”. IF SPOTS & POOR
DRYING ARE A PROBLEM, INCREASE THE AMOUNT OF RINSE AID DISPENSED BY REMOVING THE DISPENSER
LID AND ROTATING THE DIAL TO “2”. IF THE DISHES ARE STILL NOT DRYING PROPERLY OR ARE SPOTTED,
ADJUST THE DIAL TO THE NEXT HIGHER NUMBER UNTIL YOUR DISHES ARE SPOT-FREE.

***

NOTE:

Please read the notes for detergent use on p. 13.

WHEN TO REFILL THE RINSE
AID DISPENSER

-

If the rinse aid

warning light (

SEE

control panel) is not on, you
can judge the rinse aid level by looking at the
black dot on the rinse aid dispenser. As the
rinse aid level decreases, the black dot shrinks.
Never

let the rinse aid get below ¼ full.

7

BAUMATIC BFD47SS dishwasher user manual

8

LOADING

NOTE:

YOUR

FOR BEST PERFORMANCE,

FOLLOW THESE
LOADING GUIDELINES. FEATURES AND
APPEARA

NCE OF

RACKS & CUTL

ERY

BASKETS MAY VARY FROM YOUR MODEL.

DISHWASHER

BEFORE LOADING!

• REMOVE ALL SCRAPS OF FOOD.

• E

MPTY DRINKS & LIQUIDS FROM CUPS.

• SO

FTEN BURNT-ON FOOD IN PANS BY SO

AKING.

DO OT PUT THESE ITEMS IN YOUR DISHWASHERN :

•

BRONZE

•

OLDER

•

STEEL ITEMS

CUTLERY

CUTLERY

SUBJECT TO

WITH GLUED

RUSTING

•

SAUCEPANS

PARTS

WITH

•

WOODEN

WOODEN

PLATTERS

HANDLES

•

BONDED
CUTLERY

•

CUTLERY

ITEMS OR

•

ITEMS MADE

WITH

DISHES

FROM

WOODEN,

SYNTHETIC

HORN, CHINA

FIBRES (eg.

OR MOTHER

•

PEWTER OR

SPONGES)

OF PEARL

COPPER ITEMS

HANDLES

•

DELICATE,

•

PLASTIC

•

LEAD CRYSTAL

REPAIRED OR

ITEMS THAT

GLASS

PAINT /

ARE NOT HEAT

PATTERN

RESISTANT

OVERLAID

CHINA

Note :
Do not wash stainless steel and silver cutlery together. Iron objects can rust
and

stain other items. Aluminium tends to go black. Copper, pewter & brass

stain.

8

BAUMATIC BFD47SS dishwasher user manual

COOKWARE SO THAT THEY DO NO

T

WA

TER.

ALWAYS PLACE

GLASSES,

OR

THE HIGHER

LE

VEL

(POSITION ‘2’ IN

9

HOW TO USE THE UPPER RACK

POSITION THE D

ISHES AND

THE UPPER

RACK IS FOR MORE DELICATE

AND

LIGHTER DISHWARE

SUCH

AS

GLASSES,

COFFEE & TEA

CUPS, SAUCERS,

P

LATES, BOWLS, AND SHALLOW PANS

(PRO

VIDED TH

ESE ARE

NOT TOO DIRTY).

GET MOVED BY THE SPRAY OF

CUPS & BOWLS UPSIDE

DOWN.

NOTE

:

YOUR

DISHWASHER

COMES

WITH

AN

ADJU

STABLE

TOP RACK

(BASKET)

–

PICTURED

AT RIGHT. ITS

HEIGHT

CAN

BE

ADJUSTED BY UNDOING THE FR

ONT

RAIL

CLIPS,

REMOVING

THE

RACK

COMPLETELY

AND LATCHING THE

WHEELS OF THE LOWER LEVEL

(POSITION ‘1’ IN THE FIGURE ON THE RIGHT)

1

THE FIGURE ON THE RIGHT)

IN THE GR

OOV

E

OF

THE RA

IL.

2

LOADING GUIDE (UPPER RACK):

1

Cups

2

Small

Serving
Bowls

3

Large

Serving
Bowls

4

Glasses

5

Saucers

6

Dishes

9

BAUMATIC BFD47SS dishwasher user manual

10

***NOTE ***: THE U

PPER RACK

HAS

SIDE

FLAPS

(PICTURED AT LEFT ABOVE BASKET).

TH

ERE ARE 4 (2 ON EACH SIDE)

.

TH

ESE CAN BE ADJUSTED INTO 2

POSITIONS =

POSITION 1 (HIGH)

A

ND

POSITION 2 (LOW).

TO MOVE THE FLAPS BETWEEN THESE
PO

SITIONS, FIND THE

LARGE H

ING

ES

CLASPING

EACH FLAP TO THE

UPPER

RACK. THERE ARE

TWO OF TH

ESE AT

EIT

HER END OF EACH FLAP. GENTLY PULL

B

OTH C

LASPS OFF

THE WIRE RACK AN

D

M

OVE

THE FLAP TO THE DESIRED

POSITION. BE

CAREFUL IF YOU HAVE

LONG FINGERNAI

LS!

POSITION 1

THE UPPER POSITION WILL ACCOMMODATE ITEMS SUCH AS GLASS TUMBLERS
(PLACED

BENEATH FLAP) AND WINE GLASSES. WINE GLASSES CAN BE PLACED

UPSIDE

DOWN SO THAT THE NECK NESTLES SNUGLY IN THE GROOVES AT SIDE OF

FLAP

WITH THE BASE OF THE GLASS FACING UPWARD.

POSITION 2

WHEN THE FLAPS ARE MOVED TO THE LOWER POSITION, THEY CAN BE USED TO
HOLD

ADDITIONAL TUMBLERS, CUPS AND MUGS. ALWAYS CHECK THAT YOU ARE

ONLY

PLACING ITEMS ON THE FLAPS THAT WILL CLEAR THE CEILING HEIGHT OF

YOUR

DISHWASHER WHEN YOU PUSH THE RACK BACK IN. BE PARTICULARLY

CAREFUL

WITH LONG-STEMMED GLASSWARE SUCH AS CHAMPAGNE GLASSES –

BREAKAGE HAZARD!

HOW TO LOAD THE LOWER RACK:

P

LACE LA

RGE ITEMS THAT ARE HARD TO CLEAN IN THE LOWER

RACK: eg.

POTS, PANS,

LIDS,

SERVING DISHES, BOWLS.

1.

OVAL PLATTER.

2.

DINNER PLATES.

3.

SOUP PLATES.

4.

DESSERT
DISHES.

5.

CUTLERY
BASKET.

• POTS, SERVING BOWLS, ETC. MUST ALWAYS BE PLACED UPSIDE DOWN.

• DEEP POTS SHOULD BE SLANTED TO LET WATER FLOW OUT.

• THE BOTTOM RACK FEATURES FOLD DOWN BASKETS SO THAT LARGER OR MORE POTS

& PANS CAN BE LOADED.

10

BAUMATIC BFD47SS dishwasher user manual

11

CUTLERY BASKET

CUTLERY

SHOULD BE

PLACED IN THE CUTLERY

BASKET WITH HANDLES ALWAYS PO

INTI

NG

DOWNWARD (AT THE BO

TTOM). VERY L

ONG U

TEN

SILS (LADLES, etc.)

SHOULD BE P

LACED

HOR

IZONTALLY AT THE FRONT OF

THE UP

PER RACK.

1

Forks

2

Soup Spoons

3

Dessert Spoons

4

Teaspoons

5

Knives

6

Serving Spoons

7

Gravy Ladle

8

Serving Fork

NOTE

:

• WHEN YOU ARE SATISFIED YOU HAVE LOADED ALL THE UTENSILS

AND

DISHES YOU WANT TO WASH AND HAVE ADDED THE PROPER

AMOUNT

OF

DETERGENT TO THE DISPENSER

(REMEMBER TO CHECK THE

TABLE

ON

PAGE 13 FOR THE DOSE THAT’S RIGHT FOR THE WASHING CYCLE YOU

WANT),

ENSURE THE RACKS ARE PUSHED ALL THE WAY BACK INTO

YOUR

DISHWASHER AND CLOSE THE DOOR.

• YOU ARE NOW READY TO START A WASH CYCLE (SEE NEXT PAGE).

11

BAUMATIC BFD47SS dishwasher user manual

12

STARTING A WASH CYCLE

1) MAKE SURE THAT THE PLUG OF THE

APPLIANCE IS INSERTED INTO THE

5)

TURN THE KNOB LOCATED ON

WALL SOCKET.

THE RIGHT OF THE CONTROL
PANEL CLOCKWISE UNTIL THE

2) MAKE SURE THAT THE WATER SUPPLY

DIAL POINTS TO THE SYMBOL

IS TURNED ON TO FULL PRESSURE.

FOR THE CYCLE SETTING.
SEE THE ‘WASH CYCLE TABLE’

3) LOAD THE DISHWASHER (SEE THE

ON THE NEXT PAGE.
SECTION ENTITLED ‘LOADING YOUR
DISHWASHER’).

6)

PRESS THE ON/OFF BUTTON –

THE ON/OFF LIGHT WILL

4) POUR IN DETERGENT (SEE THE

TURN ON. AT THIS POINT,
SECTION ENTITLED ‘SALT, DETERGENT

THE WASH CYCLE WILL BEGIN.
& RINSE AID’).

* REMEMBER *:

YOU CAN PR

OGRAM

YOUR DISH

WASHER UP TO 12 HOURS IN

ADVA

NCE BY PRESSING

THE DELAY

BUTTON MULTIPLE

TIMES

UNTIL

THE DESIRED DELAY

HAS BEEN SET. EACH PRESS SETS THE START TIME FORWARD BY 30 MINUTES.

What

ill

ee displayedyou w s

:

Note that

when you s

tart a

washing

cycle you will see the temp

erature displayed as well as the number

of minutes the washing cycle has left to run.

•

Digital sign: shows the delayed time, remaining

time and fault codes.

•

Delay sign: shows this when delaying.

•

Washing sign: shows this when washing.

•

Running sign: repeatedly shows this sign in turn

when running. Does not flicker when stopping.

•

Temperature display: displays the wash

temperature at any time.

Approximate Timing of Wash Cycles

Intensive

12

Norma

l

(strong)

126

mins.

Economy

114

mins.

90

mins.

Rinse

Glass

48

mins.

Rapid

51

mins.

40

mins.

Soap

7

mins.

BAUMATIC BFD47SS dishwasher user manual

For the h ea vie st soi le d l oads ,

Pr e-w as

h

Strong

dis hes an d di she s that hav

e

4 g r ams (p r e) / 20

Rinse70

℃

suc h as pots, pla tes ,gl ass es

wa

sh 50℃.

gr am s ( m ain )

sta ndar d dail y cy cle .

Dr

y i

ng.

Rinse

70

℃

and dr ied only

Glass

chi na.

Dry ing

soi le d l oads tha t do not n

e

ri nse .

e d

Soak

loa d to be c

ompl eted a fte r t

he

13

Wash C

ycle Table

Information

of Cycle

pre/ main

Aid

Program

Cycle

Cy cle Select ion

Description

Detergent

Rinse

Pr e-w as h

45℃

suc h as p ots, pa

ns, cas serol e

wa sh50

℃

bee n sitt i ng w ith dri ed food on

Rins e

gr am s( m ain )

them for a whi le .

Dry ing

For norma ll y soi le d l oads,

Pr e-w as h

Normal

and l ightly s oil ed pans .

Rins e

70℃

4 gr am s (p r e) / 20

( IEC- EN 50 242)

For lightl y soi le d l oads, s uch

w as h

45℃.

as plate s, gla ss es, bowl s and

Rins e

70℃

Ec

onomy

li ghtly s oil ed pans.

Dry ing.

20 gr am s

For dishes that nee d to r ins ed

Rins

e

Rinse

Dry ing

For lightl y soi le d l oads, suc h

Was h 45 ℃

as glas se s, cry sta l and fine

ri nse 65

℃

15 gr am s

A s horter was h for li ghtl y

wa sh 35

℃

Rapi d

dry ing.

15 g r am s

Pr e-was h of dis hes pots a nd
pans whil e wa iti ng for the

Pr e-w as h

subs equent m eal .

OVERFLOW PROTECTION

YOUR BAUMATIC DISHWASHER HAS AN OVERFILL PROTECTION DEVICE WHICH AUTOMATICALLY SHUTS OFF
THE INLET VALVE AND STARTS THE DRAIN PUMP IF THE WATER OVERFLOWS. IF

THIS OCCURS THEN TURN

OFF

THE MAINS WATER SUPPLY BEFORE CALLING THE SERVICE DEPARTMENT.

IF

THERE IS WATER IN THE

BASE

PAN BECAUSE OF AN OVERFILL OR SMALL LEAK,

THE WATER SHOULD BE REMOVED BEFORE

RESTARTING

THE DISHWASHER.

13

BAUMATIC BFD47SS dishwasher user manual

14

FORGET TO ADD A DISH?

A FORGOTTEN DISH CAN BE ADDED AT ANY TIME BEFORE THE DETERGENT
DISPENSER

OPENS.

•

OPEN THE DOOR A LITTLE TO STOP THE WASHING.

•

WAIT ABOUT TEN SECONDS. AFTER THE SPRAY ARMS STOP WORKING,
YOU

CAN OPEN THE DOOR COMPLETELY.

•

ADD FORGOTTEN DISHES.

•

CLOSE THE DOOR, THE DISHWASHER WILL WORK AFTER TEN SECONDS.

NEED TO INTERRUPT A CYCLE?

If an emergency arises,

you can stop the machine at any time. Remember to wait

approx. 10 seconds before you open the door fully, as the spray arms continue to turn

after

the power has been cut and could spray hot water up at you. DO NOT PRESS

THE ON/OFF BUTTON AS THIS WILL RESET THE WHOLE WASH CYCLE! YOU

JUST NEED TO PULL THE DOOR OPEN – DO NOT TOUCH ANY BUTTONS!

NOTE:

If you need to change a cycle,

you can as long as the dishwasher has only been

running

for a short time. Just press the ON/OFF button so the ON light goes out, turn
the knob to the setting you want then turn the dishwasher back on with the ON/OFF
button.

However, if it’s been a long time since the old cycle began, the detergent may have

already

been released and the wash water drained out. You’ll need to start a new

cycle altogether so press the ‘

ON/OFF’ button to switch the dishwasher off, wait until
the inside cools before you refill the detergent dispenser, close the door and then turn
the

knob to the cycle setting you want before you turn your dishwasher back on.

TAKE CARE WHEN OPENING THE DOOR DURING

WASHING.

THE HOT WATER MAY SCALD YOU!

AT THE END OF THE WASH CYCLE

14

• When the washing cycle timer counts back to zero, you will hear a beeping

sound

for a few seconds, meaning that the washing cycle has now finished.

• The display will read ‘END’ for about three minutes.

• Turn the dishwasher off using the ON/OFF button and open the door of the

dishwasher.

•

Wait a few minutes before unloading the dishwasher so the dishes can cool

down.

This will make them less breakable and allow them to dry better.

BAUMATIC BFD47SS dishwasher user manual

15

FILTERING SYSTEM

FOR YOUR CONVENIENCE, WE HAVE PLACED THE FILTERING SYSTEM WITHIN EASY REACH INSIDE THE

TUB.

THE FILTER REMOVES BITS OF FOOD TRAPPED IN THE FILTER FROM THE WASH WATER SO IT CAN BE

RECIRCULATED DURING THE CYCLE. THERE ARE THREE PARTS TO THE FILTERING SYSTEM: 1) The Main Filter,

2) The Coarse Filter & 3) The Fine Filter.

1 MAIN FILTER

Food and soil particles trapped by this filter are
pulverized

by a

special jet on the lower spray arm and

washed

down the drain.

2 COARSE FILTER

Larger items, such as pieces of bone or glass that could
clog

the drain are trapped in the coarse filter. To

remove

an

item caught in this filter, gently squeeze

the

tabs on top of this filter and lift it out.

3 FINE FILTER

This filter holds soil and food residue in the sump area
and

prevents it from being re-deposited on the dishes

during

a

cycle.

Caring for your Dishwasher

CLEANING THE OUTSIDE SURFACES OF YOUR APPLIANCE

• TO CLEAN

THE EXTERIOR OF

YOUR DISHWASHER

(INCLUDING THE CONT

ROL P

ANEL), USE A LI

GHTLY

DAMP

ENED CLOTH THEN DRY

THOR

OUGHLY. NEVER

USE SHARP

OBJECTS, SCOURING

PADS

OR

HARSH

CLEAN

ERS ON

ANY PART OF THE APPLIANCE.

SOME PAPER TOW

ELS CAN SCRATCH.

•

TO CLEAN THE EDGE AROUND THE DOOR,
ONLY

EVER USE A SOFT WARM, DAMP RAG.

DO

NOT USE A SPRAY CLEANER HERE OR

WHEN

CLEANING THE DOOR PANEL AS THIS

MAY

HARM THE DOOR LOCK AND

ELECTRICAL PARTS.

CLEANING THE SPRAY ARMS

THE SPRAY ARMS NEED REGULAR CLEANING AS HARD WATER RESIDUES WILL CLOG THEIR

JETS

&

BEARINGS. TO REMOVE THE SPRAY ARM, SCREW OFF THE NUT TO TAKE OUT THE

WASHER

ON

TOP OF THE SPRAY ARM AND REMOVE THE ARM. WASH THE ARMS IN SOAPY

WARM

WATER & USE A SOFT BRUSH TO CLEAN THE JETS. REPLACE THE SPRAY ARM AFTER

RINSING

IT

THOROUGHLY.

15

BAUMATIC BFD47SS dishwasher user manual

16

CLEANING THE FILTERS

• THE FIL

TER ASSEMBLY MUST BE KEPT CLEAN FOR

BEST PE

RFORMANCE. You should

remove the

l

arger bits of

food trapped in the filter after each wash cycle by

rinsing

the semicircular filter and

cu

p under running water. To re

move the f

ilter assembly, pull up on the

cup handle.

•

The entire filter assembly should be cleaned at least once a month.

• To

clear the coarse filter and the

fine filter, use a cleaning brush. Then, reassemble the filter parts

as shown in

the figure above and reinsert the entire assembly in the di

shwasher in its seat & p

ress

d

ownward to secure it.

• Improper replacement of

the f

ilter

may i

mpair appliance p

erformance and d

amage di

shes and

u

t

ensils.

•

Warning - never run the dishwasher without the filters

in place!

•

Warning - Before cleaning the inner cavity of the appliance

always allow 30 minutes for the Element to cool down to
avoid injury!

16

BAUMATIC BFD47SS dishwasher user manual

17

HOW TO KEEP YOUR DISHWASHER IN SHAPE

A

FTER

EVERY

WASH

, leave the door slightly ajar so that moisture and odours are not trapped

inside.

R

EMOVE THE

PLUG

before cleaning or performing maintenance. Never run the risk of electric

shocks.

D

O

NOT

USE

SOLVENTS OR

ABRASIVE

CLEANING

AGENTS

to clean the exterior and the rubber
parts of the dishwasher. Only use a cloth and warm soapy water. To remove spots or stains
from

the surface of the interior, use a cloth dampened with water and a little white vinegar,

or a cleaning product made specifically for dishwashers.

W

HEN YOU

GO ON

HOLIDAY

, run a wash cycle with the dishwasher empty. Then unplug it, turn

off

the water supply and leave the door slightly ajar to prevent odours and mould from

developing.

M

OVING THE

APPLIANCE

is possible but KEEP IT UPRIGHT.

S

EALS

can trap food, which in turn will cause odours. Periodic cleaning with a damp cloth or

sponge

will prevent this from becoming a problem.

PROTECTING OUR ISHWASHER AGAINST REEZINGY D F

If your dishwasher is left in an unheated place during the winter, ask a
service

technician to:

1)

Cut off electrical power to the

dishwa

sher. Remove fuses or trip circuit

bre

aker.

2)

Turn off the

water supply and disconnect the

water inlet pipe from the water

valv

e & discha

rge hoses.

3)

Drain water from the inlet pipe and water valve (Use a pan to catch the
wat

er).

4)

Reconnect the water inlet pipe to the w

ater valve.

5)

Rem

ove the plastic

sump c

over in the tub bottom and use a spo

nge to soak

up water in the rubber boot.

17

BAUMATIC BFD47SS dishwasher user manual

18

BEFORE YOU CALL FOR SERVICE …

CHECKING AGAINST THE CHARTS BELOW MAY FIX YOUR PROBLEM.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

• Replace fuse or reset circuit

breaker.

• Fuse blown, or the

circuit

breaker acted

• Remove any other appliances

feeding

from the same socket as

the dishwasher.

Dishwasher
doesn’t run!

• Power supply is not

turned on

on and the door is closed securely.

• Make sure the dishwasher is turned

• Check that the water supply is

connected properly and the water is
turned on.

• Water pressure is low

• The system is designed to detect an

overflow. When it does, it shuts off

Drain Pump
doesn’t stop!

• Overflow

the circulation pump and turns on
the drain pump. Call a Baumatic
Ltd approved technician.

action and detergent cup opening.

• Sound from soft food shredding

• Some audible sounds

are normal

This is not a problem.

• Utensils are not secure

in the baskets or
something small has
dropped into the

securely in the dishwasher.

• Ensure everything is placed

Noise!

basket and is loose

• Dishwasher has not been used

regularly. If you do not use it
often, remember to set it to fill and

• Motor Hums

pump out every week. (See Wash
Cycle table). This will help keep the
seal moist.

18

BAUMATIC BFD47SS dishwasher user manual

19

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

detergent to avoid suds.

• Use only special dishwasher

Suds in the Tub!

• Improper detergent

immediately.

• Always wipe up rinse agent spills

• Spilled rinse agent

Stained tub
Interior!

• Detergent with

colorant was used

• Make sure you use detergent

without colorant.

Dishes are not
dried!

• Rinse agent dispenser

is empty

• Make sure that the rinse agent

dispenser is filled.

Dishes and
Flatware not
Clean!

• Improper program

• Select stronger program.

• Make sure there are no large dishes

blocking the action of the detergent
dispenser

and the spray arms.

• Improper rack loading

To remove spots from glassware:

Spots and Filming
on Glasses and
Flatware!

1. Take all metal utensils out of the

• Extremely hard water

dishwasher.

• Low inlet temperature

2. Do not add detergent.

• Overloading the

dishwasher

3. Choose the longest cycle.

4. Start the dishwasher and let it to run for

• Improper loading

18 - 22 minutes, then it will be in the main

• Old or damp powder

detergent

wash.

5. Open the door and pour 2 cups of white

• Empty rinse agent

dispenser

vinegar into the bottom of the dishwasher.

6. Close the door and let the dishwasher

• Incorrect dosage of

detergent

complete the cycle.

7. If the vinegar does not work, repeat as

above,

only use ¼ cup (60ml) of citric acid

crystals

instead of vinegar.

19

BAUMATIC BFD47SS dishwasher user manual

20

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Cloudiness on
glass!

• Combination of soft

water and too much
detergent

water and select a shorter cycle to

• Use less detergent if you have soft

clean the glassware.

Yellow or brown
film on inside
surfaces!

• Use a solution of ½ cup of bleach

and 3 cups warm water to remove

• Tea or coffee stains

the stains by hand. Rinse
thoroughly.

• Iron deposits in water

can cause an overall
film

company for a special filter.

• You have to call a water softener

White film on
inside surface!

• To clean the interior, use a damp

sponge with dishwasher detergent
and wear rubber gloves. Never use

• Hard water minerals

any other cleaner than dishwasher
detergent for the risk of foaming or
suds.

Detergent cup lid
won’t latch!

• Turn the Button to ‘OFF’ position

and

slide the door latch to the left.

• Button is not in the

‘OFF’ position

Detergent left in
dispenser cups!

• Dishes block detergent

cups

• Reload the dishes properly.

through the vent by the door latch

• There is some steam coming

Steam!

• Normal phenomenon

during drying and water draining.

20

BAUMATIC BFD47SS dishwasher user manual

21

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Black or grey
marks on dishes!

• Aluminium utensils

have rubbed against
dishes

• Use a mild abrasive cleaner to

eliminate those marks by hand.

Water standing in
the bottom of the
tub!

around the outlet on the tub bottom

• A small amount of clean water

• This is normal

at the back of the tub keeps the
water seal lubricated. No action
needed.

• Be careful not to overfill the rinse

aid dispenser.

oversudsing and lead to

• Spilled rinse aid could cause

• Overfilled dispenser or

rinse aid has spilled

overflowing.

cloth.

• Wipe away any spills with a damp

Dishwasher leaks!

• Dishwasher isn’t level

• Make sure the dishwasher is level.

• Make sure if you’re using 3-in-1

tablets that you do not put rinse aid
and salt into the appliance as well.

• 3-in-1 Tablets

attaching appliance to work surface

• Level appliance & ensure top screws

Door popping
open!

• Appliance not level

are not lifting the weight of the
dishwasher.

• Note, the control panel

displays both the

Wrong Reading of
Cycle Time
remaining!

control panel is displaying. Do not

• Understand what your appliance’s

water temperature and
the time remaining as
the dishwasher runs a
cycle

confuse the water temperature
with the number of minutes
remaining in a wash cycle.

WARNING!

IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN.

IF

THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL

OR

SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.

21

BAUMATIC BFD47SS dishwasher user manual

22

ERROR CODES -

WHAT THEY MEAN

* YOUR DISHWASHER MAY EXPERIENCE A FAULT. SHOULD THIS HAPPEN, A
CODE

CONSISTING OF ‘E’ & A NUMBER FROM 1-7 CAN BE DISPLAYED.

USE

O

NDERSTAND WHAT IS RONGTHIS TABLE T U W .

*NOTE* : ALWAYS CALL FOR A Baumatic Ltd ENDORSED / APPROVED

SERVICE TECHNICIAN TO CARRY OUT REPAIRS.

CODE

SYMPTOM:

CAUSE:

WHAT TO DO:

Ensure that inlet hose is not

‘Err1’

LONGER FILL TIME.

FAUCET IS NOT OPENED.

kinked or crushed.

THE DRAIN PIPE WAS PLACED
TOO HIGH WHEN IT WAS
INSTALLED.

Ensure drainage system is as

‘Err2’

per

manual and not

LONGER or EXTENDED DRAINING TIME

extended.

MALFUNCTION OF
TEMPERATURE SENSOR OR OF
HEATING ELEMENT.

LONGER HEATING TIME – NOT
REACHING REQUIRED TEMPERATURE

CALL FOR A QUALIFIED

‘Err3’

S ERVICE TECHNICIAN.

TOO MUCH INLET WATER.

Overdosing. 3-in-1 put in
with salt and/or rinse aid in

*NOTE * - THERE ARE
NUMEROUS CAUSES OF AN ‘E4’
MESSAGE. REFER TO
APPLIANCE USAGE SECTION

‘Err4’

t

OVERFILLED

he appliance =overdose.

OF THIS MANUAL FOR
GUIDELINES

ON

HOW TO

PREVENT AN OVERFILL.

Could also be a Water

P ressure problem.

‘Err6’

SHORT CIRCUIT OR SENSOR
BREAK

OF

TEMPERATURE

CALL FOR A QUALIFIED

ABNORMAL TEMPERATURE

S

‘Err7’

ERVICE TECHNICIAN.

WARNING!

IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR

SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.

22

BAUMATIC BFD47SS dishwasher user manual

23

DISHWASHER CHARACTERISTICS

The BAUMATIC BFD47SS dishwasher model is based firmly on convenience. Apart
from

having the same general workings as other household dishwashers, it has

several

extra features.

Performance of

Dishwasher -

Your di

shwasher

has

a B

rated

wash p

erformance, B rate

d

d

rying performance and B rated energy

eff

i

ciency.

Temperature

display -

Displays the w

ash
temperature at any moment. If you know
the water temperature, you’ll be less likely
to

be

scalded w

hen you open the door.

9 Place settings -

Overflow protection -

Your

di

shwasher has an overf

ill protecti

on

prog

ram which could

automatically shut

off

the inlet valve and

start the d

rain p

ump if

the

water O

verflows.

N ormal wash l

oad of 8 pl

ace settings.

Adjustable upper

basket -

E

ven if the dishware is

l

arge, you can l

oad the dishes by adjustin

g

the basket.

Stainless s t eel tub-

You need not worry about

stains to

the tub.

Salt Warning

Indicator -

If the salt is running

l

ow, t

his signal

will light up on the

contro

l

p

anel to alert

you to top the salt

level up

7 wash programs -

You can choose d

esired program according

so the

machine can keep at its optimum

performance

level.

to the soiled

level. Such as, intensive

w

ash, normal wash, economy, rinse, gl

ass,

rapid

and pre-wash, etc.

Rinse aid Warning

Indicator -

If the

rinse aid

is

running

low, t

his signal will light up on t

he

contro

l panel, alerting you to top the rinse

Time delay feature

-

This allows the start of the program to

be del

ayed

between 1 and 24 hours,

aid level up so the machine can keep at its
opt

i

mum performance l

evel.

enabling

you to benefit

fully from cheaper

electricity! Or j

ust to

benefit

from the

convenience of the program finishing

when

you

want it to.

Broad applied

voltage -

T

his appliance uses A

C

(alternating current) volt

age. Please be

a

w

are t

hat t

his will make its op

eration

vulnerable

to uneven current in your home

and

power surges.

Error Alarm -

Faul

t

codes disp

lay will i

nform the

user of any

abnormal

status of the

machine

.

23

BAUMATIC BFD47SS dishwasher user manual

24

INSTALLATION INSTRUCTIONS

NOTE: APPLIANCE SHOULD ONLY BE FITTED

BY A TRAINED TECHNICIAN

INSTALLING YOUR DISHWASHER

Your

sher s with a freestanding feature, oudishwa i y

only

to o i

ng:need d follow

1 Levelling the Appliance(pls see the section “get your dishwasher
level

in

page 25)
2 Connect the water inlet (pls see page 26)
3 Electrical connection (see page 27)

Also

i

nstall it to a cabinet cavity accordingyou can

follow

i

ng:

a) PREPARATION

Before you install your appliance, make sure that the place you
have

chosen to fit it is:

• Near the existing

power

socket

(marked 4 in figure).

• So that you can

choose

one side of

the

cabinet cavity to

easily

connect the

dishwasher’s

drain

hoses.

• Near your sink so

you

have easy

access

to

the water
inlet and drain
hoses

(marked 3
[inlet] & 2 [drain] in
figure).

24

INSTALLING YOUR

DISHWASHER

BAUMATIC BFD47SS dishwasher user manual

INTO A CABINET

AREA

•

If dishwasher is to be

installed at the corner of
cabinet area, make sure
you have enough space
when the door is opened.

REMEMBER THE

•

DIMENSIONS OF YOUR
DISHWASHER! THESE
ARE (measured in figure
in mm):

•

It should be structured so

that you have less than 5
mm between the top of

the

dishwasher and

cabinet.

• Also check that the
outer door is aligned to
cabinet.

FIRSTLY, GET YOUR DISHWASHER LEVEL

-

Once the appliance is
positioned, adjust the four
feet (screwing them in or out)
to adjust the height
of the dishwasher, making it
level. In any case, the
appliance should not be
inclined more than 2°.

25

b) Connecting

to

he mains water supplyt

IMPORTANT: Do not connect the appliance to your mains water supply
using an old or an ex ist ing w at er in let h ose. The inlet ho se su pplied wit h
the dishwasher is the ONLY one that should be used.

o The inlet hose will be located inside the cabinet of the dishwasher.
o Connect the water inlet hose to a threaded water tap that has a 3/4” thread.
o Fully tighten the inlet hose to the water tap.

c)

DO NOT CONNECT THE WATER INLET HOSE TO A HOT WATER TAP.

IMPORTANT: If the inlet hose is fitted with an aqua stop. This
MUST be fitted in the upright position, as shown in the above
diagram.

ing he rain hoseConnect t d

9

Secure the drain hose, so that it cannot move whilst the dishwa sher is in use.

9

Place the end of the drain hose on your drain pipe. Push it a short way down

into your drain pipe.

9

IMPORTANT: Do not insert the drain hose too deeply into the water pipe, as

this may cause siphoning.

9

NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL LENGTH.

26

BAUMATIC BFD47SS dishwasher user manual

27

d) NOW YOU ARE READY TO CONNECT THE
POWER CORD.

WARNING!

ELECTRICITY CAN BE DANGEROUS. PLEASE READ THE FOLLOWING

CAREFULLY :

ELECTRICAL CONNECTION

Electrical Requirements

The dishwasher is

designed

for operation on an adequately wired indivi

dual 220-240V AC,

50Hz system. The requi

red fuse rating is

13amp. Fused elect

rical supply is required –

copper wire only. Time delay fuse or circuit breaker is

recommended. Make sure that thi

s

applia

nce runs off its own

separate circuit. Outlet should be pl

aced in adjacent cabinet.

WARNING

ENSURE PROPER GROUND EXISTS–

BEFORE

SEU .

After making

sure t

hat the volt

age and the frequency values for the

current in your home

corres

p

ond to those on the rating pl

ate and that the electrical system is sized

for the

maximum voltage on the

rating pl

ate, i

nsert the plug into an

electrical socket which is earthe

d

p

roperly. If the

electrical socket to which the app

liance must be connected is

not right for

the plug, repl

ace the

socket, rather than using adap

tors of the like as they

could ca

use

ove

rhe

ating and fire.

27

BAUMATIC BFD47SS dishwasher user manual

28

e) THEN, APPLY THE CONDENSATION STRIP.

The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose
is to deflect steam rising from your appliance to
protect your worktop’s underside.

• The strip is located inside your

dishwasher.

• Ensure the surface is clean prior to

sticking to underside of the worktop.

• Separate the backing paper from the

strip.

• Stick to the underside of the worktop.

Note: Failure to attach strip could
result in damage to the underside
of your work surface!

f) NOW YOU ARE READY TO PUSH THE
DISHWASHER INTO POSITION

(SEE FIGURE BELOW):

NOTE

–

MAKE SURE YOU HAVE THE
D

I

SHWASHER ON ITS SLIDE

RAILS

(SEE I

LLUSTRATION ON

RIGHT).

* Note *

You can detach the top board
(5)

that comes as part of your

dishwasher

if you want to

i

nstall your dishwasher in

your

cabinet.

THEN MOVE IT I

NTO THE

CABINET RECESS

(AS

PICTURED ON RIGHT, 6-7

),

ENSURING

THAT IT IS BACKED

UP AGAINST THE WALL.

28

BAUMATIC BFD47SS dishwasher user manual

29

g) ENSURE THAT YOUR DISHWASHER IS LEVEL
IN ITS NEW POSITION

.

NOTE:

YOUR DISHWASHER MUST BE
LEVEL

FOR PROPER DISH RACK

OPERATION

AND WASH

PERFORMANCE.

(GO BACK AND LOOK

AT THE BOTTOM RIGHT DIAGRAM ON PAGE

24).

IT’S IMPORTANT TO MAKE SURE
THAT

YOUR DISHWASHER IS

LEVEL

AGAIN, BECAUSE THE

FLOOR

SURFACE MAY BE

DIFFERENT

TO

WHERE YOU HAD
ADJUSTED IT BEFORE YOU MOVED
THE

DISHWASHER INTO PLACE

WARNING!

BE CAREFUL WHILE YOU ARE LEVELLING YOUR DISHWASHER IN PLACE

– IT COULD TIP OVER AND INJURE YOU!

FINAL CHECKLIST BEFORE OPERATING

NOTE: BEFORE

YOU START USING YOUR DISHWASHER,

PLEASE

MAKE SURE YOU HAVE CHECKED

:

•

WHETHER THE DISHWASHER IS LEVEL AND
FIXED.

•

WHETHER THE INLET VALVE IS OPENED.

•

WHETHER THERE IS LEAKAGE AT THE
CONNECTIONS

OF

THE CONDUCTS.

•

WHETHER THE WIRES ARE TIGHTLY
CONNECTED.

•

WHETHER THE POWER IS SWITCHED ON.

•

WHETHER THE INLET AND DRAIN HOSES
ARE

KNOTTED / KINKED.

•

WHETHER ALL PACKING MATERIALS &
PRINTED

MATTER HAVE BEEN REMOVED

FROM

THE DISHWASHER.

PLEASE

HIS MANUAL FOR FUTUREKEEP T

REFERENCE

29

Minimum and maximum plate sizes

Maximum height of

dishes (upper basket)

Maximum height of
dishes (lower basket)

With upper
basket raised

19 cm 30 cm

With upper
basket lowered

24 cm 25 cm

IMPORTANT: Care should be taken to make sure that the spray
arms can move freely when items have been loaded into the
baskets.

30

Environmental note

o The packaging materials that Baumatic uses are environmentally

friendly and can be recycled.

o Please discard all packaging material with due regard for the

environment.

31

Czech Republic

Baumatic CR spol s.r.o.
Amperova 495
46215, Librec

United Kingdom

Czech Republic

Baumatic Ltd.,
Baumatic Buildings,

[phone]

6 Bennet Road,
Reading, Berkshire

www.baumatic.cz

RG2 0QX
United Kingdom

Slovak Republic

Baumatic Slovakia, s.r.o.

Sales Telephone

Skultetyho 1

[phone]

831 04 Bratislava 3

Sales Fax

Slovakia

[phone]

Service Telephone

[phone]

[phone]

Service Fax

Germany

[phone]

Baumatic Gmbh

Spares Telephone

Janderstrasse 9

[phone]

Mannheim, 68199

Technical Advice Telephone

Germany

[phone]

[phone]

E-mail:

[e-mail]

www.baumatic.de

[e-mail]

Italy

Website:

Baumatic Italia S.R.L.

www.baumatic.co.uk

Via Caltana 129
Campodarsego (Padova), 35011

Republic of Ireland

Italy

01- 6266 798

[phone]
www.baumatic.it

Holland

Baumatic Benelux B.V.
Grindzuigerstraat 22
1333 MS ALMERE
The Netherlands

[phone]
www.baumatic.nl

32

: