Baumatic BDI652 User Manual

0 (0)

BDI652 60 cm Fully integrated full height dishwasher

USER MANUAL FOR YOUR BAUMATIC

BDI652 60 cm Fully integrated full height dishwasher

NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.

DD 21/04/09

2

Contents

Environmental note

4

 

Important safety information

5 – 7

Specifications

8 - 9

Product and aperture dimensions

8

 

Product specifications

8

 

Energy efficiency details

8

 

Electrical details

9

 

Description of the appliance

9 - 10

Control panel

10

 

Using your dishwasher

10

- 19

Before first use

10

 

Filling with dishwasher salt

11

– 12

Setting the water softener level

12

 

Filling with rinse aid

13

 

Setting the rinse aid level

13

- 14

Filling with dishwasher detergent

14

 

Loading the upper basket

15

 

Adjusting the upper basket

15

- 16

Loading the lower basket

17

 

The cutlery basket

17

- 18

Loading dishes and cutlery

18

- 19

Program table

20

- 23

Setting a wash program

20

– 21

Changing a wash program

21

 

At the end of a wash program

21

- 22

Setting a delay start

22

 

Setting a half load

22

- 23

Rinse aid and salt indicator neons

23

 

Cleaning and maintenance

24

– 27

The filter system

24

 

Cleaning the filters

25

 

Cleaning the spray arms

26

 

Cleaning the control panel

26

 

Cleaning the door

27

 

Error code failure system

27

– 29

General troubleshooting

29

– 30

Installation

31

- 41

Aperture requirements

31

 

Preparing and connecting the furniture door

32

– 34

Adjusting the tension of the door spring

34

 

Adjusting the position of the plinth

35

 

Connecting to the mains water supply

36

 

Connecting to the water outlet

37

 

Connecting to the power supply

37

- 38

Applying the condensation strip

38

- 39

Positioning the dishwasher

39

 

Levelling the appliance

40

 

Securing the dishwasher

41

 

Before first use

41

- 42

Contact details

43

 

3

Baumatic BDI652 User Manual

ENVIRONMENTAL NOTE

Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.

oThe packaging materials that Baumatic uses are environmentally friendly and can be recycled.

oPlease discard all packaging material with due regard for the environment.

4

IMPORTANT SAFETY INFORMATION

Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.

General Safety

oRepairs to your appliance must only be carried out by a Baumatic engineer or one of its authorised service agents. Any attempt by an inexperienced person to repair the appliance, could result in injury or damage to your dishwasher.

oIf you notice that the mains cable is damaged. The appliance must not be used. The same applies if you notice that the worktop, control panel or base area is damaged. As this could allow access to the internal components of the machine.

oThe appliance should be turned off and isolated from the mains supply, before either cleaning or maintenance work is attempted.

oThe mains cable must not be used to pull the plug out of the electrical socket.

o The machine should not be sprayed with water.

oThe external surface of the appliance may become hot whilst your dishwasher is in use.

oIt is possible for small animals to chew either mains cables or water hoses, which could cause an electric shock hazard.

Installation

oThe installation instructions contained within this user manual should be followed.

oIt is obligatory for the completed installation to comply with all relevant building regulations and local water authority requirements.

oBefore the first use of the appliance, you should follow the steps listed in the “Before first use” section on page 10 and page 41 of this manual.

5

oCare should be taken not to trap the power supply cable underneath the appliance whilst installing it.

oNo attempt should be made to alter or modify the specifications of this appliance.

In daily use

oThis appliance is only designed to wash normal domestic washloads. If you use your dishwasher in any other way or it is incorrectly used, then Baumatic accepts no liability for any damage that might be caused and any guarantee will be void.

oIt is recommended that the appliance is unplugged and the water supply is turned off after the machine is used.

oThe detergents, rinse aid and salt that you place in this appliance should be suitable for automatic dishwashers. With regards to dosage levels, the detergent manufacturer’s recommendations should be followed.

oSharp knifes or ones with long blades are a potential safety hazard when placed in an upright position in the cutlery basket. We would recommend that these items are placed horizontally in the upper basket.

oYou should not wash any items that have come into contact with corrosive, acidic or alkaline chemicals, paint, petrol, iron or steel debris.

oYou should not open the door whilst the appliance is set on a wash program. Depending on which stage that the wash program is at, hot water could escape the machine.

oYou should not leave the door of the appliance open, unless you are loading or unloading the dishwasher.

o You should not stand or sit on the door when it is open.

6

Child Safety

oYour dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should not let them touch the controls or play with the appliance.

oIt could be possible for a child or pet to gain access to the dishwasher if the door is left open. Therefore please check the inside of the appliance before setting it on a wash cycle.

oAny packaging that is removed from the machine should be kept away from children.

oAll detergents should be kept out of children’s reach in a safe place.

oSome water will remain inside the dishwasher when it has completed a wash cycle. This water is not suitable for drinking and may contain residues from the detergents that are used in the appliance.

Declaration of conformity

This appliance complies with the following European Directives:

-73/23 dated 19/02/1973 Low Voltage Directive and subsequent modifications.

-89/336 dated 03/05/1989 Electromagnetic Compatibility Directive and subsequent modifications.

For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your dishwasher is located on the right hand side of the drop down door.

Model Number ……………………………….

Serial Number ……………………………….

Date of Purchase ……………………………….

7

Specifications

Product dimensions

Height: 820 - 850 mm

Width: 595 mm

Depth: 560 mm

Aperture dimensions

Height:

820 mm (min)

Width:

600 mm

Depth:

590 mm (min)

Product specifications

o 14 Place settings

o 5 functions: Normal Intensive Economy Rinse Rapid

o 4 Wash temperatures: 40°C, 45°C, 50°C, 60°C o 2 Rinse temperatures: 60°C, 70°C

o Delay timer o LED display

o Self-cleaning stainless steel microfilter o Electronic aqua stop

o Anti-leak device o Anti-flood device

o Height adjustable upper basket with easy adjust handles o Collapsible plate racks

o Concealed heating element o Adjustable feet

o Residual drying o Half load option

Energy efficiency details

 

Energy efficiency class:

A

Washing performance class:

A

Drying performance class:

A

8

Electrical details

Rated voltage: 230 Vac 50 Hz

Supply connection: 13 A (double pole switched fused outlet with 3 mm contact gap)

Optional extra

o DWD600SSStainless steel door with mark resistant coating

Description of the appliance

1)Upper basket

2)Spray arms

3)Lower basket

4)Water softener

5)Main filter

6)Detergent dispenser

7)Cup shelf

8)Cutlery basket

9)Coarse filter

10)Rinse aid dispenser

11)Drain pipe connector

12)Inlet pipe connector

9

Control panel

1)Program indicator neons

2)Program selection button

3)Rinse aid and salt indicator neons

4)½ load indicator neon

5)½ load button

6)LED display

7)Delay start button

8)ON/OFF indicator neon

9)ON/OFF button

Using your dishwasher

Before first use

oInstall the appliance as per the installation instructions contained within this booklet.

oFill the water softener with 1 litre of tap water and then fill with specialist dishwasher salt. After this you should set the water softener level.

o Fill the rinse aid dispenser and then set the rinse aid dosage.

10

Filling with dishwasher salt

IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is used in the appliance (in particular table salt), it will damage the water softener.

oIdeally you should fill the water softener with salt, just before you are about to run a wash program. This will help to clear any salt that may have overflowed from the water softener during the salt filling process.

oOpen the door of the dishwasher and then remove the lower basket. The basket should be empty when you remove it.

oTurn the salt container cap anticlockwise and remove it.

oPour 1 litre of water into the water softener container.

IMPORTANT: It is only necessary to do this when you fill the container with salt for the first time.

oPour salt into the salt container, using the funnel that is supplied with the appliance. You should add approximately 1.2 kg of salt into the container.

oIt is perfectly normal for a small amount of water to come out of the salt container, whilst you are filling it with salt. This does not mean that the container is filled with the correct amount of salt.

o Refit and fully tighten the salt container cap.

oThe salt required warning light will go out approximately 2-6 hours after you have filled the salt container with salt. When the salt indicator neon lights on the control panel, then you should follow the filling with dishwasher salt procedure again.

11

oIMPORTANT: You do not need to pour 1 litre of water into the container when you subsequently fill the water softener with salt.

Setting the water softener level

It is possible to regulate the amount of salt that the water softener will release during a wash cycle. The water softener should be set to a level that is appropriate for the hardness of your water (please refer to the table below).

To alter the amount of salt that is released by the water softener, you should:-

oRemove the lower basket and unscrew the cap from the salt container.

oLocate the ring with an arrow on it that is located on the salt container. (See figure opposite).

oWhen you first receive your appliance, the arrow will be pointing to the minus symbol. Using the water hardness chart, you should turn the arrow to the setting that is appropriate for your water hardness.

oThe “middle” selector position is halfway between the minus and plus symbols.

oIMPORTANT: If you are using 3 in 1 dishwasher tablets and live in a medium or hard water area, then you should still fill the water softener with salt. The water softener arrow should be turned to the minus setting.

12

Filling with rinse aid

The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These droplets will lead to spots and streaks being left on items after the wash program has completed.

o Your dishwasher is designed to utilise liquid rinse aid.

oThe rinse aid dispenser is located inside the drop down door, next to the detergent dispenser.

oTo access the rinse aid dispenser, you should turn the cap anticlockwise and it will pop out of the hole. Then slowly pour in liquid rinse aid, the rinse aid dispenser will hold approximately 140 ml of rinse aid.

oYou should continue to fill with rinse aid, until the level indicator turns completely black.

oBe careful not to overfill the dispenser, as this could cause oversudsing when a wash program is selected. Wipe away any rinse aid excess or spillages with a damp cloth.

o Replace the cap and turn it clockwise until it locks into position.

oYou should refill the rinse aid dispenser when the rinse aid indicator neon lights on the control panel.

oIMPORTANT: If you are using 3 in 1 dishwasher tablets then you should still fill the rinse aid dispenser.

Setting the rinse aid level

The amount of rinse aid that the dishwasher requires also depends on the hardness of your water. You should experiment with the rinse aid setting, until you find a level that gives the best results.

oOn the first wash cycle, we would recommend that the rinse aid level is set to number 2.

oIf you get water spots and poor drying performance, then you should turn the arrow anticlockwise and increase the setting to the next number.

13

oYou should continue to adjust the rinse aid level upwards until you get no water spots.

oIf you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. Turn the arrow clockwise and lower the setting to the next number.

Filling with dishwasher detergent

The detergent dispenser must be refilled at the start of each wash cycle (apart from the Rinse wash program).

oOpen the lid that closes over the detergent dispenser and place the detergent inside of the dispenser.

oThe section marked 1 in the diagram is for the main wash cycle detergent. Only one detergent tablet should be placed in the dispenser at any one time. If you are using detergent powder or liquid, you should follow the detergent manufacturer’s recommendations.

oThe section marked 2 in the diagram can have separate detergent placed in it for any wash cycle that has a pre-wash element to it, however this is optional. This must be a liquid or powder detergent, not another detergent tablet.

oShut the detergent dispenser lid and position the clip on the outer edge, so that it holds the lid shut.

oAt the beginning of a wash cycle the clip will open and the tablet/powder/liquid will enter the dishwasher.

14

Loading...
+ 30 hidden pages