bauknecht WAK 6250 PROGRAMME CHART

GB WAK 6250 PROGRAMME CHART
This washing machine is equipped with automatic safety functions whic h detect and
diagnose faults at an early stage and react appropriately, e.g.:
A. “Door Locked” indicator
As long as a washing programme is running, the lamp lights up to sh ow tha t th e door ca nnot b e ope ned.
B. “Pump” indicator C. “Water Tap” indicator
Check your washing machine's water supply.
A
B
C
E
D
F G
D. “Start” button E. Program Sequence Indicator
{
H
F. “Spin Speed Reduction” button G.“Reset” button H.Selectable programmes
Programme
Cotton
Koch- Buntwäsche
Synthetic
Pflegeleicht
Daily mixed
Mischwäsche
Rapid wash
Schnelle Wäsche
Delicate
Feinwäsche
Wool
Wolle
Handwash
Handwäsche
Rinse + Spin
Spülen + Schleudern
Spin
Schleudern
Gentle spin
Schonschleudern
Drain
Abpumpen
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled blouse s, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Slightly to normally soile d tex t iles made of cotton and/or synthetic fibres.
Hardly worn outer and sports clothing made of cotton, polyester, polyamid and mixed cotton fabrics.
Curtains and delic a te dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
–– ––
––
––
Type of wash/
Degree of soiling
Max.
Detergent and Addi tiv es
load
Softener Main
Kg Vorwäsche
5.0
2.5
3.0
3.0
1.5
1.0
1.0
5.0
5.0
1.5
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–––––– ––––––
Pre-
wash
❉❉❉❉ ❉
❉❉❉❉❉
–– ––
❉❉
–– ––
–––
Selectable Special Options =
Pre-
wash
Intensive
Rinse
Intensiv
Spülen
Rinse
hold
Spülstopp Schleudern °C rpm
Speed
reduction
❉❉ ❉
– –
– –
❉❉
❉❉
❉❉
❉❉
❉❉ ❉
Tem pe -
rature
30-40 60-95
1)
30-40-60 1000
40 and 60 1200
1)
30-40 1000
1)
30-40
2)
1)
Max.
Spin
speed
1200
30 1200
cold
1000
30 400
20 1200
– –
1200
1000
Notes
“Prewash” can be additionally sele cted for heavily soiled laundry at any temperature.
“Prewash” can be additionally sele cted for
1)
heavily soiled laundry.
In this programme the spin speed should be adapted to the fabrics.
1)
If you select “Rinse Hold” do not leave items to
1)
soak for too long. If you select “Rinse Hold” do not leave items to
2)
soak for too long. A very gentle spin is used in this programme.
Same as the spin cycle in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
A very gentle spin is used in this programme.
1)
Same as the spin cycle in the “Wool” programme.
This progr amme on ly dra ins (alte rnat ive metho d of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be canc elled with this programme.
5019 401 05312
CONSUMPTION DATA
Programme Tempera ture
*
Wash
Water
Energy
Programme duration
approx.
(°C)
(kg)
(l)
(kWh)
(hours : minutes)
Cotton 95 5.0 46 1.90 2:00 Cotton 60 5.0 39 0.95 2:10
Cotton 40 5.0 39 0.60 2:10 Synthetic 60 2.5 55 0.90 1:40 Synthetic 40 2.5 50 0.50 1:25
Daily Mixed 40 3.0 44 0.45 1:00
Rapid wash 30 3.0 35 0.30 0:30
Delicate 40 1.5 55 0.60 0:45
Wool 40 1.0 55 0.60 0:40
Handwash 30 1.0 40 0.30 0:35
*The consumption values were me asured in normalized conditions in compliance with Standard IEC/EN 60456. ** The programme duration may also vary from the chart values. The washing machine is able to allow for particular
household conditions and to adapt the pr ogramme run time accordingly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROG RAMM E
Add the detergent as described in the chapter “Detergent and Additives” in the instructions for use.
1. Turn the programme selector knob in any direction t o the de sir ed prog ramme . The light above the “Start” button flashes.
2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.
SELECT SPECIAL OPTIONS - The corresponding lights go on (if not selectable: rapid flashing for 3 seconds)
“Rinse Hold” button
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional crea sing ar e pre vent ed.
• This option is particularly recommended for the programme “Synthetic” or “Delicate”.
• This function is particularly us eful if you want to postpone spinning to a later time.
Note: The programme has reached the “Rinse Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current
“Prewash” button
• Only for heavily soiled laundry (e.g. sand or granular dirt). Programme duration is increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.
programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “Start” button again.
“Speed Reduction” button
• A maximum spin speed is assigned to each programme.
• Press the button to set another speed for the spin cycle.
• If no light goes on, the final spin is cancelled. The water is only drained out.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over the “Start” button flashes. Turn on the tap and start the programme by pressing the “Start” button. Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the associated lights. After the end of a programme phase, the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme, only the “End” indicator is still on.
“DOOR LOCKED” INDICATOR
As long as a washing programme is running, the lamp lights up to show that the door cannot be opened. When the lamp goes off, the door can be opened again.
If “Start” has been pressed, but the door is not latched, the “Door Locked” indicator flashes for 10 seconds. The door must be pushed shut within this time. After the 10 seconds, the “Door Locked” indicator goes out and the “Start” button flashes. The door must then be opened and closed again and the “Start” button must be pressed.
“TROUBLE” INDICATORS
“Pump”
Waste water is not pumped out. Check wether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
PROGRAMME END
• The “End” indicator goes on.
1. Set the programme selector knob to the “Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the “Start” button to interrupt the programme. The light flashes.
2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.
3. Press the “Start” button again to restart the programme.
• If you are in the “Prewash” programme step, this
additional option cannot be deselected as described (to do this see “Cancel (Reset) a running programme before the end”).
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
Press the “Reset” button for at least 2 seconds. Any existing water is drained out before the door can be opened.
5019 401 05312
Loading...